Tekno TKR5603 RC 1/10 MT410 Pro 4x4 Monster Truck Kit

Chassis: CNC machined aluminum black anodized, 0.16" (4mm) thick,
class leading short chassis overhang for better bump handling and
jump landing, adjustable brace system for fine tuning chassis flex
Drive: Four wheel, CV driveshafts with captured pins on all wheels
Differentials: Three fluid filled lightweight bevel gear, split
center diff mount for easy maintenance
Suspension: Long travel geometery, adjustable hinge pin braces for
toe, anti-squat, kick-up and front arm sweep
Shocks: CNC aluminum body 16mm Big Bore, conical piston design
provides varied compression and rebound rates, 0.16" (4mm) diameter
steel polished shafts, options for vented cap, emulsion or standard
shock configurations
Shock Towers: CNC machined 7075 aluminum 0.16" (4mm) thick
Motor Mount: Two-piece CNC aluminum with dual clamping gear mesh
adjustment
Body Mounts: Adjustable LCG lightweight system fits most popular MT
bodies from ProLine, JConcepts and other companies
Steering: Full ball bearing support, narrow pivot posts provide
0 bump geometry and almost 0 steering slop, adjustable Ackermann
and bump steer, Ackermann refers to the effect of the inner front
wheel rotating faster than the outer front wheel during turns
Battery Tray: 1.97 x 5.8" (50 x 148mm) integrated battery tray/mud
guard, battery is sunken into chassis for low center of gravity
Radio Box: Easy access, with integrated transponder mount

4x4 MT410 Pro Monster Truck Kit with Shocks and Instruction Manual

Radio: 2-channel with high torque steering servo
Motor and ESC: For 1/8 scale applications, brushless motor highly
recommended
Battery: 4S 14.8V LiPo, at least 5000mAh
Battery Charger/Balancer: Compatible with selected battery
Wheels: 1/8 scale monster truck
Tires: 1/8 scale monster truck with foam inserts
Pinion Gear: MOD 1, 15-25 teeth
Body: 1/8 scale, some of the bodies listed as optionals may require
extended body mounts, truggy chassis and driveshafts, or new body
holes, Tekno RC has a chart on their website with further info
LiPo charging bag, paint, building and track equipment

Length: 20.9" (530mm)
Width: 16.5" (420mm)
Wheelbase: 12.7 - 13.2" (323-335mm)
Weight: 8.3lbs (3850g) when equipped with motor, battery and receiver
Battery Tray Dimensions: 1.97 x 5.8" (50 x 148mm)