Tekno RC M6 Front & Rear Driveshaft/Steering Block/Hub Carriers 6mm Slash 4x4

The Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4×4, Stampede 4×4, Rustler 4×4, and Hoss the ultimate in performance and durability.

If you are having issues with anything breaking this will most likely be caused by running the RPM A-Arms made from pure nylon. These arms are not compatible with our kit as they are too flexible. Because of this extreme flexibility, the metal parts of our kit are compromised during use. For this reason, we can only recommend using the stock Traxxas arms.

The Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 4×4, Stampede 4×4, Rustler 4×4, and Hoss the ultimate in performance and durability.

If you are having issues with anything breaking this will most likely be caused by running the RPM A-Arms made from pure nylon. These arms are not compatible with our kit as they are too flexible. Because of this extreme flexibility, the metal parts of our kit are compromised during use. For this reason, we can only recommend using the stock Traxxas arms.

Features
Custom 6mm stub axles – no more bending or breaking
Bigger outer bearing for better load handling 6x12x4 (stock is 5x11x4 outer)
Hardened steel driveshafts and drive cups
Captured CV drive pin – it can’t fall out.
New M6 steering block design with additional bump-steer adjustments
Eliminates slop
Stock wheels and nuts fit with no mods
Metric hardware throughout
17mm adapter option (sold separately)
Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
New M6 rear hub design with multiple camber link locations
Includes two sets of rear hubs (0.5  and 1.5 degrees).  1, 2, 3, and 4 degree settings available.

Requires
Screw pin from the original Traxxas output yoke (TRA6828X – M3 screw pin)
Screw pin from the original Traxxas output yoke (TRA6828X – M3 Screw Pin)

Includes:
1 x TKR6851X
1 x TKR6852X

Compatibility
This driveshaft kit is compatible with the Slash 4×4, Rustler 4×4, Stampede 4×4 and the HOSS. They are a direct fit for these vehicles and do not require any additional parts.