Decoders and Accessories

Eight 9G servo decoder for 2-position Slow-motion turnouts.Configurable to control eight 3-position semaphores.Works with compatible LocoNet Systems.Plug and play connections.Option setup switches for configuration.On-layout remote programmability via...

8 CV-Selectable Steam & Diesel Sound Schemes IncludedMobile Decoder with SoundFX v3Fits many HO locomotivesDigitrax Easy Connect 8 Pin HarnessMotor 1.0 Amp/2 Amps Peak4 FX3 Functions, 200ma OutputNew sound .spjs loadable with Digitrax USB programmer8...

Fits Kato, Athearn Genesis, Stewart, other HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

A full featured, 4 function, 3.5" (88.9mm) harnessed decoder with a built in Keep-Alive™. The built-in Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our auto-adjusting...

Fits many Kato HO legacy locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

Fits Kato AC4400 or compatible HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Kato SD38-2 or compatible HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Kato FP40-PH or compatible HO locomotivesDrop-in light board replacement1.0 Amp/2 Amps Peak8 FX3 Functions, 200ma Output8 Ohm 28 mm round speaker w/330uF Capacitor

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but features the...

Features:DG583S fits all large scale locos.Easy installation with screw terminals for all wire connections.Decoder Lock equippedSpecificationsCurrent Rating-Motor5.0 Amps (10.0 Amps Peak)Size1.45” x 2.23” (36.83mm x 56.64mm)InstallationScrew Terminal...

Features:DG583AR fits locos with AristoCraft DCC plug arrangement.Use with locos that have two motors per truck such as AristoCraft SD45.Decoder Lock equippedSpecifications:Current Rating-Motor 5.0 Amps (10.0 Amps Peak)Size 1.45” x 2.23” (36...

High-capacity wired Mobile decoderFits many larger locomotives4 Amp/5 Amps Peak8 FX3 Functions, 300ma Output