Tekin 1/10 RS gen2 ESC 21.5 Gen2 Sensored Brushless Motor System Combo TT2421

FEATURES:   RS Gen 2 ESC (TEKM1154);
          Compatible with sensored, sensorless, brushless, and brushed motors
          High voltage programmable Battery Eliminator Circuit (BEC)
          HotWire PC interface for advanced programming and updating, EZ access
            programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor
            (TEKM3825) required)
          Forward, brake, and reverse operation
          D2 Dual Drive Mode technology
          On-board temperature indicator
          Sensor plug for precise commutation with all motors
          Gold plated solder posts
          Pit tune mode
          Self test diagnostics and factory reset
          DGF2 Digital Glitch Filtering V2
          QuickTune programming with one-touch radio calibration
            21.5 Redline Gen2 Motor (TEKC2403);
          Specifically designed for 1/12 scale 1S LiPo and stock racing
          Legal in major governing racing bodies
          Dual plug sensor wire harness for all sensored and sensoreless
            systems
          CNC machined T 6061 billet aluminum heatsink can with anodized
            endbell plates
          High RPM precision bearings
          High purity copper windings
          Adjustable timing
          Neodimium sintered magnet
          120 day limited warranty through Tekin beginning at date of purchase


INCLUDES: RS Gen 2 Brushless ESC with Instructions, Motor and Receiver Wires
            21.5 Redline Gen2 Motor with Sensor Wire


SPECS:      ESC;
          Input Voltage: 4-9 cells, 2S-3S LiPo
          BEC: 6.0V/7.4V, 5.5amps
          Brushless Mode Motor Limit: 8.5 turn, 540 2-pole (36mm)
          Brushed Mode Motor Limit Forward Only: 10 turn
          Brushed Mode Motor Limit Reverse: 12 turn
          Max Current: 120amps per phase
          Timing Profiles: 7 choices on-board
          Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
          Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
          Dimensions: 1.0 x 1.3 x .51" (25.4 x 33 x 12.9mm)
          Weight: 2.0oz (48g) with wiring


            21.5T Redline Gen2 Motor;
          Weight: 6.2oz (177g)
          Shaft Dimensions: 5 x 15.3mm
          Motor Diameter: 1.40" (35.85mm)
          Motor Length: 2.03" (51.8mm)
          Bearing Dimensions: front: 4x13x5mm rear: 1/8x3/8x5/32"
          kV: 2200
          Rotor: 12.5mm