Castle Creation 1/18 Mamba Micro X Waterproof ESC w/ 0808 8200Kv Brushless Motor

Technical Specs:
ESC:
Input Voltage Range: MIN: 2S LiPo
MAX: 3S LiPo (12.6V) (8200kv motor rated for 2s LiPo/7 cell NiMH Max)
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing
On/Off Switch: Yes, waterproof
Cooling Fan: No
Size:    
Length: 1.6" (41mm)
Width: 0.75" (19mm)
Height: 1.1" (28mm)
Weight (without wires): 1.20 oz. (34g)
Connectors: 3.5mm bullets
Items Needed for Operation:    Battery Connector required, 4mm Castle Connectors are recommended.
Product Use Statements:    
Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty.
Recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.
Application Guidelines:    1:18 scale RC hobby vehicles weighing up to 1.5lbs.
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo
Recommended Motors:    Combo includes Castle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMH
Max. Recommended Vehicle Weight:    1.5 lbs, with batteries, ready-to-run
Programmability:    Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.
Telemetry Link Capable: Yes
Tech Notes: N/A

Motor:
Input Voltage Range: 2S LiPo max (for 8200Kv motor)
Kv: 8200
Max. RPM: N/A
Motor Size:    Length: 1.5" (38.1mm)
Diameter: 0.79" (20mm)
Shaft Size:    Diameter: 0.08" (2mm)
Length: 12mm
Weight (w/wires): 1.8 oz. (50g)
Mounting Hole Specifications: 2.5mm holes @ 1/2”, 14MM, 5/8”
Cooling Fan: No
Connectors: 3.5mm male bullets
Items Needed for Operation:    N/A
Product Use Statements:    Max operating temperature: 180F (82C)
Application Guidelines:    Up to 2S LiPo and weighing in at up to 1.5lbs.
Max. Recommended Vehicle Weight: 1.5lbs
Tech Notes:    Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.

Putting the X in Extreme!
Mamba Micro X is our latest 1:18 scale controller capable of 2S - 3S LiPo (2s max with included 0808 8200kv), with an 2 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 2WD or 4WD vehicles over 1.5 lbs and up to 2.25 lbs (1.75lb max with included 0808-8200kv motor)
Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo

The Auxiliary Advantage.
Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Mamba Micro X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field.

Telemetry Capability
The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.

Mighty Mini Combination
This combo includes the Mamba Micro X controller and our lightweight, yet powerful, 0808-8200Kv motor.

*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.