Castle Creations Copperhead 10 ESC w/1406-7700Kv Brushless Motor

COPPERHEAD 10 FEATURES:

Input Voltage Range for 1406-7700Kv Combo : 2s LiPo
SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes
Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit)
CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs.
ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer.
30mm removable fan and DUAL USE FAN GUARD
Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters
AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff.
Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake.
DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp)
SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode.
CASTLE LINK USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store
PROUDLY DESIGNED, ASSEMBLED AND SUPPORTED IN KANSAS, USA.
Backed by Castle Creations' 1-YEAR WARRANTY

ESC Specs:
Application Guidelines:
1:10 scale vehicles weighing up to 4.0 lbs. (with included 1406-7700Kv Motor)
Input Voltage Range:
2s
Running Modes:
SMARTSENSE™, Sensored Only and Brushed Motor Operation
Brake:    Proportional
Reversible:    Yes, but may be disabled for racing.
On/Off Switch:    Yes, waterproof
Cooling Fan:    Yes, factory equipped (30mm), fully removable** and includes dual use fan guard  (See Operating Use Statements)
Size:    2.19" x 1.39" x 1.33"
Weight (with wires):    70.9 g / 2.50 oz.
Motor Connectors:
4.0mm female bullets for motor connection
Items Needed for Operation:    Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended.
Operating environment:
Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Programmability:
Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately).
Telemetry Link Capable:
Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters.

Motor Specs:
Input Voltage Range:    2s
Kv:    7700
Max. RPM:    100,000
Motor Size:    Length: 49.5mm
Diameter: 36mm
Shaft Size:    Length: 15mm
Diameter: 1/8" (3.17mm)
Weight (w/wires):    197 g / 6.9oz
Mounting Hole Specifications:    M3 @ 25mm
Cooling Fan:    Optional - Coming Soon
Connectors:    4mm male Castle Bullet Connectors
Items Needed for Operation:    Compatible Electronic Speed Control (ESC)
Product Use Statements:    
Application Guidelines:    2s only on lightweight vehicles; 2WD buggies, stadium trucks and touring cars
Max. Recommended Vehicle Weight:    4 lbs. ready-to-run
Tech Notes:    Running modes: Sensorless and Sensored

Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

ESC Specs
Application Guidelines:
1:10 scale vehicles weighing up to 4.0 lbs. (with included 1406-7700Kv Motor)
Input Voltage Range:
2s
Running Modes:
SMARTSENSE™, Sensored Only and Brushed Motor Operation
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes, waterproof
Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard  (See Operating Use Statements)
Size: 2.19" x 1.39" x 1.33" 
Weight (with wires): 70.9 g / 2.50 oz.
Motor Connectors:
4.0mm female bullets for motor connection
Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended.
Operating environment:
Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Programmability:
Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately).
Telemetry Link Capable:
Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters.
Tech Tips:


Motor Specs
Input Voltage Range: 2s
Kv: 7700
Max. RPM: 100,000
Motor Size: Length: 49.5mm
Diameter: 36mm
Shaft Size: Length: 15mm
Diameter: 1/8" (3.17mm)
Weight (w/wires): 197 g / 6.9oz
Mounting Hole Specifications: M3 @ 25mm
Cooling Fan: Optional - Coming Soon
Connectors: 4mm male Castle Bullet Connectors
Items Needed for Operation: Compatible Electronic Speed Control (ESC)
Product Use Statements:
Application Guidelines: 2s only on lightweight vehicles; 2WD buggies, stadium trucks and touring cars
Max. Recommended Vehicle Weight: 4 lbs. ready-to-run
Tech Notes: Running modes: Sensorless and Sensored

Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.