Castle Creations
Castle Creations 011-0142-00 Mamba X Wires Harness Retainer
(No reviews yet)
Write a Review
- SKU:
- 011-0142-00
- Condition:
- New
Description
This is a replacement part for the 1/10th Mamba X ESC. It is used to retain the receiver harness and sensor harness.
Package includes:
1 - Delrin retainer
2 - 1.6mm x 8mm screws
Installation instructions:
1.Unplug wires from receiver and disconnect the fan.
2.Using 1.5mm hex wrench, remove screws.
3.Remove old Wire Harness Retainer.
4.Install new Wire Harness Retainer and screws. Make sure flat side faces up and contoured side faces toward ESC (see picture).
5.Reconnect cooling fan and receiver connections.
View AllClose
Package includes:
1 - Delrin retainer
2 - 1.6mm x 8mm screws
Installation instructions:
1.Unplug wires from receiver and disconnect the fan.
2.Using 1.5mm hex wrench, remove screws.
3.Remove old Wire Harness Retainer.
4.Install new Wire Harness Retainer and screws. Make sure flat side faces up and contoured side faces toward ESC (see picture).
5.Reconnect cooling fan and receiver connections.
Related Products
Related Products
Castle Creations 011-0157-00 Receiver Harness Replacement for Mamba XLX2 ESC
Castle Creations
$10.95
Replacement Receiver Harness for the Mamba XLX2 ESC.Features:Correct factory-specified connectors (RX and AUX)Waterproof switchFactory-specified wire gauge
011-0157-00
Castle Creations 011-0137-00 ESC Cooling Fan for Mamba X
Castle Creations
$14.95
This 30mm ESC cooling fan is a direct replacement and fits the Mamba X ESC. Keep one on hand, especially if you are hitting the trails!Installation Instructions:1. Unplug the fan from the ESC.2...
011-0137-00
Sold Out
Castle Creations X Series Sensor Harness 011-0108-00
Castle Creations
MSRP:
$11.95
$9.95
This is the Castle Creations X Series Sensor Harness.
011-0108-00
Castle Creations 011-0167-00 Series Wire Harness T-Plug
Castle Creations
$13.95
Double up on power!The Castle Series Wire Harness with T-PLUG connectors allows you to connect two battery packs in series, combining the voltage of your batteries. For example: two 3S (11.1v) packs...
011-0167-00
Castle Creations 011-0156-00 ESC Cooling Fan for Mamba XLX2
Castle Creations
$15.95
This 50mm ESC cooling fan is a direct replacement and fits the Mamba XLX2 ESC.Installation Instructions:1. Unplug the fan from the ESC's receiver harness.2. Locate the four screws on top of the ESC.3...
011-0156-00
Castle Creations 011-0151-00 ESC Cooling Fan for Mamba Monster X 8S
Castle Creations
$12.95
This 40mm ESC cooling fan is a direct replacement and fits the Mamba Monster X 8s ESC.Installation Instructions:1. Unplug the fan from the ESC's receiver harness.2. Locate the four screws on top of...
011-0151-00
Castle Creations Receiver Harness Mamba Micro X
Castle Creations
MSRP:
$8.95
$6.95
This is the Receiver Harness
for the Castle Creations Mamba Micro X ESC.
011-0105-00
Castle Creations 011-0168-00 Parallel Wire Harness w/ T-Plug Connectors
Castle Creations
MSRP:
$16.95
$13.95
Control your power!The Castle Parallel Wire Harness with T-PLUG allows you to connect two battery packs in parallel, combining the capacity of your battery packs. For example: two 3s (11.1V) 6000mAh...
011-0168-00
Sold Out
Castle Creations Receiver Harness For Mamba X Series ESC
Castle Creations
MSRP:
$8.95
$7.99
This is the Receiver Harness
for the Castle Creations Mamba X Series ESC (MONSTER X, MONSTER X 8S AND MAMBA X)
011-0106-00