Orlandoo Hunter Model BL1104-30 Micro Brushless Outrunner Motor 1/30 Reduction

Micro Brushless Outrunner Motor. It is no exaggeration to say that this motor, together with the 35A Brushless ESC, is a total game-changer for Olandoo owners. Finally, all the benefits of brushless are available for 1/32 . You will be astounded at the finesse with which you can control your truck at low speed. A brushed motor will never match the slow startup of brushless, even with the best ESCs. Now add in oodles of torque, whilst retaining a good lick of top-end speed and you have a winner! Not only do you get this huge step up in power and control, but it also comes in a very compact package!

This little outrunner comes from the micro drone world, and unlike some branded competitors has had the spindle completely replaced to suit the N20-size gear head. Other manufacturers rely on turning the shaft to fit the tiny gearbox pinion; a decidedly home-brew approach that has been eliminated here. While it is unsensored, the 12-pole outrunner format means you can put any fears of cogging to rest. Most small brushless ESCs should work with this motor.

Compatibility: Micro Brushless Outrunner Motor
It is worth noting that the micro brushless outrunner motor is available with two shaft lengths and a variety of gear reduction ratios. Also, the diameter of the can means this motor will not fit some models, and for others some modifications will be required. Our recommended reduction ratios are a guide only, based on likely usage. 1:5 is the fastest combination and 1:100 is the slowest, but with the most torque.

Please refer to the list below, and note the shaft length required for your model:

No Modification Required For:
OH35A01: Short Shaft (1:30 or 1:50 recommended)
OH32A02: Short Shaft (1:30 or 1:50 recommended)
OH32A03: Short Shaft (1:30 or 1:50 recommended)
OH32M01: Short Shaft (1:50 or 1:100 recommended)
OH32M02: Short Shaft (1:50 or 1:100 recommended)
OH35P01 Alloy Chassis Conversion ONLY: Short Shaft (1:30 or 1:50 recommended)
OH32T01: Short Shaft (1:50 or 1:100 recommended)
OH32X02: Short Shaft (1:10 or 1:5 recommended)