Futaba

FEATURES: This sensor provides the RPM of a motor to the Futaba 18MZ transmitter INCLUDES: Two screws Two nuts Two cylindrical magnets Four flat washers Two lockwashers Sensor unit Adapter cable...

DESCRIPTION4-Port S.Bus Terminal Box- TB 22 PPFor S.Bus Servos (FSH-72)

Transmitter carrying boxFor Air Transmitters (UBB1220)FEATURES:– Durable hardshell gloss black finish.– Rubber handle with backbone for increased grip and rigidity.– Sized to fit in any overhead...

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

Neck Strap – Black with Orange LogoFutaba Neck Strap (EBB1063)LENGTH:24 inchesSTRAP WIDTH:1 inch

FEATURESCompatible with the Futaba 7PX 2.4GHz T-FHSS Super Response7-Channel Surface SystemPlastic constructionProtects LCD screen from damageINCLUDESTransmitter Screen Protective...

FEATURESCompatible with the Futaba 7PX 2.4GHz T-FHSS Super Response7-Channel Surface SystemFoam gripPlastic wheel with dark chrome finishOptional wheel is slightly larger than stock 1.6" (41mm)...

DESCRIPTIONT4PX/T7PX Rubber Grip – LargeBlack Rubber Grip – 4.4″ Length – Thicker than Small Version (UBT3330)

This is the Small Rubber Grip for the Futaba 4PX Transmitter.FEATURESConstructed of molded rubber, black in colorSame length, but thinner and softer than large rubber gripFastens to left side of...

DESCRIPTION4PX/7PX Brake Lever – Extra/Super Small13 mm Brake Trigger SS (Super Small) for Tx 4PX or 7PX (UBB1156)This aluminum throttle/brake lever is smaller than the width of the one provided with...

This is the Trainer Cord for the Futaba 12FG or 8FG series of radios. FEATURES: For use when the Futaba 8FG or 12FG is used with another Futabatransmitter with a micro port and standard 9.6V...

This is the Futaba CPS-1 Channel Power Switch. FEATURES Allows LED light systems to be controlled from a transmitter with at least three...

This is the Futaba Brushless Motor RPM Sensor.FEATURESCompatible with the Futaba 18MC-WC, 18MZ, 18SZ, 14SG, 10J, 6K,4PX-R, 4PX, 4PV, 4GRS and 4PLS systemsFor use with Futaba telemetry transmitters...

FEATURES: This sensor allows you to monitor engine temperature with your transmitter. INCLUDES: One sensor REQUIRES: S.BUS compatible receiver SPECS: Temperature range: -4deg F (-20deg C) to ~392deg...

FEATURES Brushless motor Optimized for use with a glow powered RC vehicle Futaba S.BUS2 system can be connected to a PC using the CIU-2 USB adapter...

DESCRIPTION4PX/7PX Brake Lever – Small15 mm Brake Trigger SS (Small) for Tx 4PX or 7PX (UBB1155)

DESCRIPTIONTrainer Switch – ML-1FLP LongSolder-On Switch (UBT3443)

DESCRIPTIONThree-Position Switch – ML-1BFSP ShortSolder-On Switch (UBT3441)

DESCRIPTIONTwo-Position Switch – ML-1BFLP LongSolder-On Switch (UBT3347)

DESCRIPTIONTwo-Position Switch – ML-1AFSP ShortSolder-On Switch (UBT3339)

DESCRIPTIONGyro Mounting Pads – CGY7502 mm x 22 mm x 22 mm, 10 Pack (UBS3403)

DESCRIPTIONGyro Mounting Pads3 mm x 22 mm x 22 mm, 10 Pack (FSH-70)

DESCRIPTION130 mm Gyro ExtensionFor GY520 (FSH-68)

DESCRIPTION80 mm Gyro ExtensionFor GY520 (FSH-67)

DESCRIPTIONGyro Mounting PadsFor CGY760R – 10 Pack (EBS3465)

This is the Wheel for the Futaba 4PK Transmitter FEATURES: Nylon construction Silver in color INCLUDES: One Transmitter Wheel REQUIRES: Installation on the transmitter SPECS: Outer Diameter: 44mm (1...

This is the Futaba 39.4" (1000mm) S.Bus Hub with Cable. FEATURES: Connects servos to the S.Bus system and also allows the use of remotebattery packsOne year limited warranty through manufacturer...

This is the Futaba 19.7" (500mm) S.Bus Hub with Cable. FEATURES: Connects servos to the S.Bus system and also allows the use of remotebattery packsOne year limited warranty through manufacturer...

DESCRIPTIONSBS-01G: GPS Sensor (Version 1.0)Telemetry GPS Sensor (01102288-1)USE:GPS/Altitude sensor (from atmospheric pressure) with Vario meterRANGE:SPEED:About 0 km/h ~ 500 km/hAbout ~311...

This is the APA Wheel Offset Adapter for the Futaba 4PV and 4PX.FEATURESAttaches to transmitter to move steering wheel down for driverpreferenceCan be used with the APA Steering Angle...

FEATURES: Orange nylon construction White Futaba logo Black adjustable strap clips Metal spring loaded clip INCLUDES: One strap REQUIRES: Transmitter SPECS: Length: 24" (610mm) Width: 1" (26mm)

FEATURES For use when S.Bus/S.Bus2 servos are used in the S.Bus system Six ports, four in the center and one on each side Receiver or S.Bus servo...

DESCRIPTIONGyro Mounting Pads – Soft2 mm x 22 mm x 22 mm, 10 Pack (FSH-69)

This is the Futaba CIU-3 USB PC Interface.FEATURESCIU-3 interface makes it easy to program all 35+ Futaba S.Bus andS.Bus2 servosAlso updates Futaba gyro and 4PX and 6K firmwareYou will need to...

This is the Futaba 3PV 3-Channel FHSS/S-FHSS/T-FHSS Telemetry Radio System with the 4-Channel R304SB T-FHSS Telemetry Receiver. FEATURES ...

This is the Hook Adapterfor the Futaba 4PV Surface Radio Systems.  FEATURESPlastic bracket and aluminum hook installs under hand grip and allows a neck strap to be attached INCLUDESNeck Strap...

FEATURES: This sensor, when used in conjunction with a telemetry-enabled radio system, is used to indicate the rotation speed of a propeller, rotor, or other component. Nothing needs to be attached...

This is a Futaba Receiver Charge Cord with preinstalled leads. FEATURES: One receiver battery charge adapter for Futaba radios with a set ofpreinstalled leads with bare ends to allow different...

FEATURES: Brushless motorWater protectedHybrid (titanium/metal) gears with two ball bearingsProgrammable and compatible with S.Bus and S.Bus2 systemsHigh voltage handles extra speed and power...

The Futaba BLS251SB is a digital rudder servo designed for tail rotor control of helicopters. It succeeds the BLS251 with its new S.Bus feature and is directly programmable by the FASSTest 18MZ...

This is the Futaba High Voltage BLS273SV S.Bus2 HSProgrammable Servo for Flybarless Heli Applications. FEATURES: Designed to be used with helis requiring high speed and high torqueBrushless motor...

This is the Futaba CA-RVIN-700 External Voltage Input Cable. FEATURES: Used to connect a Futaba telemetry equipped receiver to an extravoltage port INCLUDES: Cable, Fuse, Heat Shrink Tube and...