Futaba

This is the Futaba 3PV 3-Channel FHSS/T-FHSS, S-FHSS Radio System with the 3-Channel R203GF Receiver. FEATURES FHSS/T-FHSS, S-FHSS...

This is the Futaba SBC-1 S.Bus Channel Setting Tool. FEATURES: Used for setting channels to S.Bus servos and decoders of the FutabaS.Bus systemLED blinks and then glows steadily when channel setting...

This is the Futaba High Voltage BLS172SV S.Bus2 UHTProgrammable Metal Gear Servo. FEATURES: Brushless motor offers incredible holding power and 5X longer lifethan servos equipped with brushed...

This is the 4-Cell Dry receiver battery box with Futaba J connector. FEATURES: Designed to be used with 4 AA alkaline batteries.Made of black plastic.Futaba J style connector.One year...

4-cell holder for batteries to power a receiver. This has a BEC plug pre-wired onto it and will not go directly into the receiver. A switch harness with a J type receiver plug and a male BEC plug...

9.6V, 700mAh Transmitter NiCad for the following Futaba Radios:        9C, 8U series, 7 NFK, 6DA, 6VA, 6NFK, 6NPK, 9VAP(S), 9VHP(S).INCLUDES: One Square 9.6V,...

Specification-Speed   0.11 sec/60°@7.4V                                         ...

.

-Single axis airplane rate gyro-Remote gain/ mode adjustment-Supports S.BUS, S.BUS2-Dimensions 21x21x11mm-Weight 3.7g-Air Use-Input voltage 4.0-8.4V 

The GBP1 Programming box is used for the CGY760R. Connected to a dedicated port on the CGY760R, this programmer allows you to check and update settings with a few quick button presses...

FEATURES: Assembled and shrinkwrapped INCLUDES: 7.2V 1700mAh NiMH Battery for the Futaba 12FG transmitters REQUIRES: Charging at 170mA for 12 hours, order FUTM1805 if charger is needed SPECS:...

This is the Futaba R3008SB T-FHSS 2.4GHz Receiver.   FEATURES Bi-directional communication with a T-FHSS Air-2.4GHz Futabatransmitter using the S.BUS2 portStandard PWM output ports and S...

This is the Futaba R3006SB T-FHSS 2.4GHz S.Bus2 6/32 Channel Receiver. FEATURES Bi-directional communication with a T-FHSS Air-2.4GHz...

FEATURES: For use with the 4-PL S-FHSS four channel surface radio          Flexible coaxial antenna that's easy to position inside a model...

This is the Futaba 3PV 3-Channel FHSS/S-FHSS/T-FHSS Telemetry Radio System with the 4-Channel R304SB T-FHSS Telemetry Receiver. FEATURES ...

FEATURES: Ideal upgrade for radios found in RTR vehicles          Throttle and steering trim and...

Description:This is Futaba GYD450 Drift Spec Gyro For RC Drift. It is a drift-only gyro that shows outstanding abilities in an increasingly intensifying drift scene. Just by mounting this small box...

This is the Hook Adapterfor the Futaba 4PV Surface Radio Systems.  FEATURESPlastic bracket and aluminum hook installs under hand grip and allows a neck strap to be attached INCLUDESNeck Strap...

 This is the Futaba Standard Size Ball Bearing High Torque Servo.        This servo can produce high-current draw from your batteries...

FEATURES: This sensor provides the RPM of a motor to the Futaba 18MZ transmitter INCLUDES: Two screws Two nuts Two cylindrical magnets Four flat washers Two lockwashers Sensor unit Adapter cable...