Kyosho

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.

These are the springs that are used in the track's suspension system on the idler wheels.

No boundaries, no compromises!New gyro improves cornering performance! At the end of 2023, the Mini-Z MR-04EVO2 underwent a full model change after 14 years. Building on the MR-03’s proven...

OTH245BK 8Hole Wheel 50mm(Black/2pcs/OPTIMA)Optional Black 50mm wheel set for Turbo Optima. 2 pcs.Color variation of 50mm wheel. (Only fits 50mm tires. 12mm hex.)When used with #OTT244M/H/S, it can...

Rear Stabilizer Set for RB7.5

Upper deck for OPTIMA Mid SP

Brake Disk Pad (2Pcs) 

Connecting cable to power ET001 for Mini-Z Sports

Replacement Receiver w/Gyro for Fazer D2

2-Speed Joint Cup for GT2

Replacement Tires for the INFERNO NEO 3.0

1 Complete Differential Gear Set for Inferno MP9 and Inferno GT3.

White Color Sus. Bush Set for Inferno MP9

Aluminum Rear Hub Set for Fazer FZD2 (L/R)

SP Motor Mount Plate (FZD2) Finned for better heat dissipation and includes fan mount for optional 30mm fan. (IFW502-01B)

Aluminum Brake Disc Hub Set for Fazer D2 FZD2 (4pcs)

Aluminum Front Knuckle Set for Fazer D2 FZD2

Body Mount Set for Fazer D2 (FZD2)

.

FAW221 ST Ball in out Tool (FZ02)Optional parts for the Fazer MK2 and the FZ02. Convenient tool when installing and removing front hub ball. The ball can be installed straight by tightening the cap...

Aluminum shock mount for Mini-Z MR-03. Fits MM or RM types.Additional hole position offers a wider set up range.

UTW002 Carbon Front Shock Stay (ULTIMA)Carbon option front shock tower for Ultima.

UTW001 CNC Motor Plate (Gunmetal/ULTIMA)Gunmetal anodized CNC motor plate for Ultima.

OTW128-01 Front Shock Case (Gold/OPTIMA)Gold front shock bodies for Turbo Optima.

OT215G Rear Plate (Gold/OPTIMA)Gold anodized rear plate set for Turbo Optima.

MZN201 Skyline GT-R R32 Group A White Body Set w/WheelSkyline R32 group A Mini-Z Non-decoration white body. Fits MA020 NWheelbase: 94mm (L)Wheel Offset: F: N +1.5/ R: N +1.5

.

UMW749 Universal Swing Shaft(65.5mm/RB7SS/2pcs)Optional part for RB7SS. For use with stock inD/inD setup (Rear short arm/wide hubs/long axle/short diff).

.

.

This is an optional blade arm made from machined 7075 aluminum and not only looks super cool but adds to the stability and performance of the blade system on the Blizzard SR.

Gunmetal anodized aluminum rear shock tower for GT3.

IFW629 Al Front Hub Carrier Set(L,R/22/Gunmetal/MP10)22 degree caster Aluminum front hub carrier. Compatible with MP10 / MP10 TKI2 / MP10e. Bigger angle increases stability on bumpy tracks.

1969 Chevy Camaro Z/28 DecorationBodySetPre-painted Chevy Camaro Z/28 body for FAzer Mk.2 FZ02 chassis.

EF207S Front Axle Mount(FANTOM EP-4WD)Front axle mounts for Fantom EP-4WD.

MBT003MB Medium Compound Foam Tire Set (4Pcs) for Mini-Z Buggy

 Tie rod set changes front toe angle of MR-03.

.

Hard Universal Swing Shafts for MINI-Z AWD. 

Center drive shaft for the MINI-Z FWD (MA-03F) 

Drifting Tire Set (11mm) Special drift tires for AWD Mini-Z wide 11mm. (4pcs)

FAW205-01 Ball Cup (4pcs)Replacement ball cups and clips for FAW205 aluminum front hubs.

.

Replace kit standard plain bearings with these precision units. Reduces friction and increases run times.

Front Suspension Arm Set For MR-04 Evo2

1mm thick PC body for the MP10 and MP10TKI2. 1.0mm PC body is more durable and long lasting then the 0.8mm body.

2020 Mercedes-AMG GT3 "50 Years Legend of Spa" Decoration Body Set  fits Fazer Mk2 FZ02 chassis. (Short)

FAW227 Ball Diff 40T (for FZ02 TC)Ball differential for the Fazer Mk2 FZ02 touring chassis. Lighter(30g) than the stock gear diffs and also the plastic gears have less noise. Ball diffs...

Mini-Z Speed House AA/AAA NiMH USB Charger 2

Servo Motor & Potentiometer for Mini-Z 4X4.

XSpeed 41 Sensored Brushless Motor 4100Kv For MR04 Evo2

XSpeed 56 Sensored Brushless Motor 5600Kv For MR04 Evo2

Fluorescent Yellow Rear wheels for Tomahawk.

Fluorescent Yellow front wheels for Tomahawk.

IF651 Main Chassis for MP10 RS

HD coated 50mm shock set for MP10 TKI2.

 IF581 Main Chassis for MP10e RS

Rear Suspension mount for MP10/MP10e Ready set.

Front Center shaft for MP10e Ready set. 90mm

 IF459-23 Front Sway Bar 2.3mm (1Pc) for MP9 

Full model upgrade for the top of the MINI-Z series!Total balance takes performance to new heightsWhile retaining elements of the excellent MR-03 layout, the new MR-04EVO2 chassis achieves...

OTB247Y Body Yellow w/ Decal Set : 1/10 Buggy Javelin

Aluminum Upper Arm Set for MR-03.                                             ...

.

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.

IFW641 Front Steel Lower R Suspension Holder Black for Inferno MP10

IF404C Large Center Diff. Case Set for MP9/10

OTH245Y 8Hole Wheel50mm(Yellow/2pcs/OPTIMA)Optional parts for the TURBO OPTIMA.Color variation of 50mm wheel.(only fits 50mm tires)When use with #OTT244M, it can be used as optional parts for the...

MZW444N Front Upper Arm Mount(MR-03EVO/Narrow)Upper arm holder for the MR-03EVO. The rigid aluminum block firmly holds the arms for more accurate geometry control. Can also be used to get more...

0.5mm shorter and softer springs than the MZW401 set. Includes 5 different spring rates. Optimal settings can be achieved when using MZW415 (sold separately) aluminum  upper arms and...

TBT0450 Turmbuckle Rod Titanium / 4x50 (2pcs)

Optional parts for INFERNO MP10 series.17T clutch bell with 0.8 module gear pitch.The 0.8 module, which is finer than the conventional 1.0 module, and the finer tooth shape enables smooth...

OT223B Diff Gasket (4Pcs) for Optima

MXW008 Diecast Front Axle CaseAluminum diecast front axle case for Mini-Z 4X4. The additional weight on the front axle will enhance climbing performance while protecting the front axle with its...

FAW205 HD Front hub (FZ02/2pcs)Option parts for the Fazer Mk2. CNC machined aluminum front hubs allow precise and linear steering response and smooth suspension movement.  Also allows set camber...

BLB011-1 BLIZZARD 2.0 Top Body SetClear upper body set for Blizzard 2.0.Includes decals and window masks.

OTW142 Carbon Chassis for Optima Mid

OTW129-01 Rear Shock Case Gold for Optima

Block Tire 50x83x36mm Soft (OPTIMA) OTT244SB

OT266 Mount Set for Optima Mid

OT264 Plate Set for Optima Mid

OT262 Upper Deck for Optima Mid

OT261 Chassis for Optima Mid

MZW429R-01 2-Way Connector for LEDLightUnit (MZW429R only)Allows use of 2 MZW429R light sets for Mini-Z. Only works with MZW429R, MZW439R is not supported by this item.

Front Oneway Unit (MINI-Z AWD) Nullifies front-rear rotational differnce in tight corners to realize smooth cornering. Ideal for technical course layouts that demand sharp handling.

OT219G Main Chassis (Gold/OPTIMA)Gold anodized chassis rails for Turbo Optima.

Carbon fiber rear side plate for Optima Buggy. Left side only.

Ball diff outdrives for Optima Buggy. 1 pair.

2.0/2.6mm screw pack set for Optima Buggy. Includes 10pcs 2X10mm cap, 8pcs 2X8mm flat tapping, 8pcs 2.6X8mm flat,4pcs 2.6X14mm flat, 8pcs serrated cone washers, and 4pcs 2.6X0.5mm washers.

.

R246-1362 MM2 Roll Damper Set 2Roll damper for R246-1361 and MZ217 MM2 Motor Mount.Features:Blue anodized precision machined aluminum with shiny finished edgesRecommended using with R246-1360 oil...

R246-1332B F Spring Mount for MR-03W 0/0.5/1/1.5mmBlue anodized aluminum spring holder allows preloading of the front springs. For wide tread (W) MR03. 

R246-1312B Steering Block for MR-03 Camber 2°Aluminum steering block for MR03. 2° Camber built into the axle.

NTTH001BK Premounted Tire (Nitro Tracker/Black/2pcs)Pre-mountewd tires for Nitro Tracker. 1 pair.

MZN182 SKYLINEGT-R R33 V SpecWhite body set(w/Wheels)Unpainted Skyline GT-R R33 V Spec body set with wheels (AWD). Fits AWD MA-020 Mini-Z.

MXB03GR BS MX-01 Suzuki Jimny Sierra GreenGreen Suzuki Jimny Sierra autoscale body for Mini-Z 4X4

MX-01 Jeep WRANGLER UNLIMITED Rubicon Firecracker Red MXB01R

MD401 Main Unit Set (MA-030EVO/SA-41)Main board for Mini-Z MA-030 EVO.

Genuine Kyosho option parts for maximum performance and durability!