Kyosho

MZW40-40 Super Low Height Slick Tire(40deg/4pcs)Super low profile front (Narrow) tires for Mini-Z. 40 degree compound. 4pcs.

Multi-function charger / discharger equipped with a dedicated program that is ideal for Mini-Z that covers from beginners to race users The MINI-Z Charger EVO is a compact size charger that fits...

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In the...

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In the...

EFTH100W Pre-Shaped Small Tire(H38/45mm/L25/50mm)Optional lower height tire set for Fantom EP 4wd.Front 45mm and rear 50mm. Stock tires are F 48mm / R 54mm.

70615 KYOSHO SPEED HOUSE TORX 10E BLS 4000KVSensorless brushless motor 4000kv (shaft diameter : 3.175mm) for 2S LiPo.Suitable for 1/10 On and Off-road cars. Weight : 205g

R246-1363 Rebuild Set(R246 Motor Mount/Roll Shock)Rebuild set for R246 Motormount / Roll Shock.Contains: Bind Screw: 2x3mm, 2x5mm, 2x6mm, 2x8mm               ...

Replacement track parts for one wheel of the MXW009 Catappi.

.

.

If you want to run the MINI-Z 4X4 on any road surface, this is it! The rugged coolness is also improved by attaching the catappi! ***This product requires assembly (approx 1.5hr per pair)***By...

.

74033-11 Recoil Starter Assembly (KE15SP)Recoil pull start assembly for KE15SP engine.

Aluminum pink anodized large flange 4mm wheel nuts for 1/10th scale vehicles. 4 pcs

Aluminum purple anodized large flange 4mm wheel nuts for 1/10th scale vehicles. 4 pcs.

Aluminum orange anodized large flange 4mm wheel nuts for 1/10th scale vehicles. 4 pcs.

Aluminum green anodized large flange 4mm wheel nuts for 1/10th scale vehicles. 4 pcs.

Aluminum gunmetal anodized large flange 4mm wheel nuts for 1/10th scale vehicles. 4 pcs.

.

R246-8535 2P-Standard Exchange Connector Type A Standard plastic connector to superplug adapter. Allows use of batteries with a superplug.

MZW439R LED Light Clear & Red(for ICS connector)Mini-Z light set for ICS connector port. Fits ASF / MHS boards. (NOT Sports/RWD)

.

MXW005 Brass Front HubMachined brass front hub for Mini-Z 4X4. Increases the weight distribution on the front wheels for improved uphill performance.

MXW002R Aluminum Link Rod Set WB120mmAluminum link set for Mini-Z 4X4 w/120mm wheelbase.

MXB03Y BS MX-01 Suzuki Jimny Sierra YellowYellow Suzuki Jimny Sierra autoscale body for Mini-Z 4X4.

Long universal swingshaft set for Mini-Z AWD MA-020.  

Precision cast gear increases durability and efficiency. For Mini-Z buggy rear end.

IF506 Battery Strap Set (VE)

Allows for ESC setting adjustments to Mini-Z Buggy VE 2.0 via Windows PC.

70707 550 Class G-Series Motor G14L Single14T single 550 class brushed motor.

37031 LE MANS 240S Brushless Motor 19.5T Sensored brushless 19.5T motor in the style of the legendary LeMans 240S! Turns:19.5T Operating Voltage:1-3S/12.6V RPM@7.4V:19092 KV(RPM/V):2580 Max...

Kit Contents:Pre-assembled kit (gearbox and oil shocks are pre-assembled)Clear polycarbonate bodyDecalsL-shape hex wrenchCross wrenchShock wrenchShock oilGreaseThreadlock glueRequired for...

IFS004-1114 Big Shock Spring(Orange/11-1.4/L=95)Orange rear 95mm shock spring for MP10. For use with the IFW624 Tower and IS215 rear shocks.11 coils of 1.4mm wire.

FAW008-01 Swing Shaft (for Universal/41mm) Replacement swingshaft for FAW008 universals. 1pc.

LAW83 Aluminum Rear Shock Stay(ZX7/7075/t=3)3mm thick 7075 aluminum rear shock tower for Lazer ZX7.

IFW502-01 Cooling Fan Set(Hi-Speed Type)Replacement fan for IFW502.

EF208 Knuckle Arm (2pcs/FANTOM EP-4WD)Knuckle arm set for Fantom EP-4WD.

97054-2R-B LED Light Unit (5mm/2 Bulbs/L=400/Red)5mm Red 2 LED light set. Plugs into open RX slot and includes extension plug for additional light sets.

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In the...

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In the...

VZW447-01 Oneway Shaft Set(for VZW447)Replacement one way shaft set for VZW447 one way unit.

VZW447 FTT Oneway Unit(R4Evo.2/R4sII)Friction dampened one way unit for R4 Evo.2 / R4 S2.Requires assembly and silicone fluid.

VZ488 Rear Shock Stay(R4SII)FRP rear shock tower for R4SII.

VZ487 Front Shock Stay(R4SII)FRP front shock tower for R4SII.

.

.

.

MXW001R Aluminum Link Rod Set WB110mmAluminum link set for Mini-Z 4X4 w/110mm wheelbase.

.

.

AMR020-3.0 AMR 3.0 Drive pin (20pcs)3.0mm drive pins. 20pcs.

AMR017 AMR Fuel Bottle (Clear)High flow 500cc fuel bottle.

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In 2019...

74031-07 Crankcase Set (KE21SP)Crankcase set for KE21SP engine. Inlcudes carb stopper.

.

MZW432-01 O-Ring&Diaphragm Set(3pcs/for Oil Shock)Rebuild set for MZW432 Shock.

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In 2019...

The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler.In 2019...

UMW751 Battery Weight(32g/RB7/RB7SS)32g battery weight for RB7 / SS.Weight to put under the battery.Adjusts the weight balance when using a short STD size or short LCG size LiPo battery.

R246-8861 Pro Spec Capacitor Stock (13.5-21.5T)High-capacity capacitor that temporarily charges excessive power from the battery and discharges it for faster acceleration. This "Stock" type is ideal...

.

.

NTH001BK Wheel (Nitro Tracker/Black/2pcs)Black wheels for Nitro Tracker. 1 pair.

NT020 Shock Stay SetShock tower set for Nitro Tracker.

NT019 Upper Deck SetUpper deck set for Nitro Tracker.

W5201YB Front Wheel(4WD/2.2-inch/Yellow/2pcs)New IFMAR legal wheels with 5mm wheel shaft diameter.Yellow 4wd 2.2" front wheels. 1 pair.

PNGS4819 Steel Pinion Gear(19T-48P)Steel 48 pitch 19 tooth pinion.

NTW001 Universal Swing Shaft(2Pcs)Universal swingshafts for Nitro tracker. 2 pcs.

NT007 Sus. Shaft SetSuspension shaft set for Nitro Tracker.

NT006 Wheel Shaft (2pcs)Wheel shaft for Nitro Tracker.

NT004 Servo Saver SetServo saver set for Nitro Tracker.

UMW748 Short Steel Diff. Shaft Set(RB7SS)Short steel diff shaft set for low to mid grip surfaces. Can be used with RB7SS stock inD/inD setup (Rear short arm with wide hubs and long axle).

FA201D Main Chassis (RAGE VE/Dirt Hog/Mad Bug) Main chassis for RAGE VE / Dirt Hog / Mad Bug. Includes main shaft and battery hold down.

The Kyosho nitro starter pack includes practically everything you need to run your nitro vehicle. Includes a fuel bottle, re-chargeable igniter with charger, a phillips and...

VS114 Front Upper Sus.Shaft(FW-06)Front upper suspension shaft for FW-06. 2 pcs. includes e-clips.

MZW443 Inner Tube Pitching Shock (MR03RM)Silicone damper for Mini-Z MR03 RM.Damping effect can be adjusted by viscosity of silicone oil or grease applied.

MA306 Rubber Bush Set (FO-XX) Rubber dogbone bushing set for Mad Crusher VE / FO-XX. 6pcs each.

97057 Stainless Wing Stay (Type R)Stainless steel wing mount for touring car bodies.

82042 MINI-Z EVO Receiver Unit Futaba T7PX T7XCReceiver unit for the MINI-Z EVO chassis. Can be used with the Futaba 7PX and 7XC transmitters only.

IF459-2.9 Front Sway Bar (2.9mm/1pc/MP9/MP10)2.9mm thick front sway bar for MP9/10.

2 X 1.1mm hole shock pistons for W5307 shock set. 2 pcs.

Optional 1.6mm top plate for TF7.7.Thinner top plate increases stability and traction on high grip surfaces when combined with TFW177R/BK V2 chassis by optimizing chassis flex.

Front carbon brace attachment for ZX7 for increased chassis stiffness.Best for high grip tracks.

.

.

.

.

VZW440 Aluminum Wheel shaft (2pcs/for universal) Aluminum wheel axles for R4 series (VZW219/VZW401) universals.14g lighter than standard.

MA075 Shock Spring (8-1.5/L=75/2pcs) Shock springs for Mad Force / FO-XX. 8 /Mad Crusher VE. coils of 1.5mm wire, 75mm long. 1 pair

.

Mini-Z X-Speed V Motor (AWD 2.4GHz) A high revving motor that increases maximum speed and acceleration.  

EZB001G Body(Green/Monster Tracker Replacement green body for Monster Tracker.

W5189-30B Spring(1.5x4.50x25/Red/2Pcs) On road springs 1.5mm wire / 4.50 coils / 25mm length.

FAB154-1 Decal Set FXX Evoluzione Decal set for FAB154 Ferrari FXX Evoluzione body.

SIL0450-8 Silicone OIL #450 (80cc) New high quality 100% pure silicone oil in 80cc container.

W5189-28B Spring(1.5x4.75x28/Pink/2pcs) On road spring 1.5mm wire / 4.75 coils / 28mm length.

36271R Radio Skins Decal(Red/for KT-200/201) Dress up your KT-200 or KT-201 with this Radio skin set. Red

36271Y Radio Skins Decal(Yellow/for KT-200/201) Dress up your KT-200 or KT-201 with this Radio skin set. Yellow.

IF104 Center Differential Shaft (2pcs) Replacement diff outdrives for the center diff on MP7.5/777 based vehicles.

.