Kyosho

※It is not possible to drive with auto scale alone. In addition, some bodies cannot be mounted depending on the chassis.

No boundaries, no compromises!New gyro improves cornering performance! At the end of 2023, the Mini-Z MR-04EVO2 underwent a full model change after 14 years. Building on the MR-03’s proven...

Connecting cable to power ET001 for Mini-Z Sports

.

Aluminum shock mount for Mini-Z MR-03. Fits MM or RM types.Additional hole position offers a wider set up range.

MZN201 Skyline GT-R R32 Group A White Body Set w/WheelSkyline R32 group A Mini-Z Non-decoration white body. Fits MA020 NWheelbase: 94mm (L)Wheel Offset: F: N +1.5/ R: N +1.5

.

MBT003MB Medium Compound Foam Tire Set (4Pcs) for Mini-Z Buggy

 Tie rod set changes front toe angle of MR-03.

.

Hard Universal Swing Shafts for MINI-Z AWD. 

Center drive shaft for the MINI-Z FWD (MA-03F) 

Drifting Tire Set (11mm) Special drift tires for AWD Mini-Z wide 11mm. (4pcs)

.

Replace kit standard plain bearings with these precision units. Reduces friction and increases run times.

Front Suspension Arm Set For MR-04 Evo2

Mini-Z Speed House AA/AAA NiMH USB Charger 2

Servo Motor & Potentiometer for Mini-Z 4X4.

XSpeed 41 Sensored Brushless Motor 4100Kv For MR04 Evo2

XSpeed 56 Sensored Brushless Motor 5600Kv For MR04 Evo2

Full model upgrade for the top of the MINI-Z series!Total balance takes performance to new heightsWhile retaining elements of the excellent MR-03 layout, the new MR-04EVO2 chassis achieves...

Aluminum Upper Arm Set for MR-03.                                             ...

.

Unidirectional edge pattern high-grip tires. Realizes exceptional grip, not just on urethane, but also on carpet surfaces.

MZW444N Front Upper Arm Mount(MR-03EVO/Narrow)Upper arm holder for the MR-03EVO. The rigid aluminum block firmly holds the arms for more accurate geometry control. Can also be used to get more...

0.5mm shorter and softer springs than the MZW401 set. Includes 5 different spring rates. Optimal settings can be achieved when using MZW415 (sold separately) aluminum  upper arms and...

MXW008 Diecast Front Axle CaseAluminum diecast front axle case for Mini-Z 4X4. The additional weight on the front axle will enhance climbing performance while protecting the front axle with its...

MZW429R-01 2-Way Connector for LEDLightUnit (MZW429R only)Allows use of 2 MZW429R light sets for Mini-Z. Only works with MZW429R, MZW439R is not supported by this item.

Front Oneway Unit (MINI-Z AWD) Nullifies front-rear rotational differnce in tight corners to realize smooth cornering. Ideal for technical course layouts that demand sharp handling.

R246-1362 MM2 Roll Damper Set 2Roll damper for R246-1361 and MZ217 MM2 Motor Mount.Features:Blue anodized precision machined aluminum with shiny finished edgesRecommended using with R246-1360 oil...

R246-1332B F Spring Mount for MR-03W 0/0.5/1/1.5mmBlue anodized aluminum spring holder allows preloading of the front springs. For wide tread (W) MR03. 

R246-1312B Steering Block for MR-03 Camber 2°Aluminum steering block for MR03. 2° Camber built into the axle.

MZN182 SKYLINEGT-R R33 V SpecWhite body set(w/Wheels)Unpainted Skyline GT-R R33 V Spec body set with wheels (AWD). Fits AWD MA-020 Mini-Z.

MXB03GR BS MX-01 Suzuki Jimny Sierra GreenGreen Suzuki Jimny Sierra autoscale body for Mini-Z 4X4

MX-01 Jeep WRANGLER UNLIMITED Rubicon Firecracker Red MXB01R

MD401 Main Unit Set (MA-030EVO/SA-41)Main board for Mini-Z MA-030 EVO.

Genuine Kyosho option parts for maximum performance and durability!  

 

Aluminum Pinion Gear Set (AWD 15T/17T/19T/21T)

Ball Diff Set (MINI-Z AWD) LSD effect produces sure-footed traction. Realizes smooth cornering without stalling. Promises durable and stable diff function over a long period.

Toyota GR Supra TRD White Body Set w/Wheel MZN207

New white multi offset wheel

MZW209 Titanium Ball Diff. Shaft : MINI-Z 

MZN204-2 Front Body mount Toyota TRUENO AE86AE86 front body mount for Mini-Z.

MZH131W-N2 Multi Wheel II N/Offset 2.0(White/RE30/2pcs)Narrow +2mm offset white RAYS RE30 wheels for Mini-Z 2WD. 1 pair.

MZH131W-N0 Multi Wheel II N/Offset 0(White/RE30/2pcs)Narrow 0 offset white RAYS RE30 wheels for Mini-Z 2WD. 1 pair.

MX012 Main FrameChassis main frame for Mini-Z 4X4.

MDH100W-N15 Multi Wheel N/Offset 1.5(White/AWD/2pcs.)White +1.5 offset narrow wheels for Mini-Z AWD. 1 pair.

MD306 Tie Rod & Motor Plate Set (MINI-Z FWD)Tie rod and motor plate set for Mini-Z FWD.

MD305 Servo Saver Assy (MINI-Z FWD)Servo saver assembly for Mini-Z FWD.

MD007 Servo Saver Assy : MINI-Z AWD

MB019 Servo Shaft Set (Mini-Z Buggy)

MB016 Center Shaft Set : Mini-Z Buggy

 LTW001 Ball Bearing Set : MINI-Z Lit

LTH002 Wheel Cap & Bumper Set Copen : MINI-Z Lit

LT012 Servo Gear Shaft Set : MINI-Z Lit

LT003 Wheel Parts Set : MINI-Z Lit

Mini-Z CUP 20th Anniversary NISSAN SKYLINE GT-R V.Spec (R33) Chrome Silver

R246-1331B F Spring Mount for MR-03N 0/0.5/1/1.5mmBlue anodized aluminum spring holder allows preloading of the front springs. For narrow tread (N) MR03. 

MZW40-40 Super Low Height Slick Tire(40deg/4pcs)Super low profile front (Narrow) tires for Mini-Z. 40 degree compound. 4pcs.

Multi-function charger / discharger equipped with a dedicated program that is ideal for Mini-Z that covers from beginners to race users The MINI-Z Charger EVO is a compact size charger that fits...

R246-1363 Rebuild Set(R246 Motor Mount/Roll Shock)Rebuild set for R246 Motormount / Roll Shock.Contains: Bind Screw: 2x3mm, 2x5mm, 2x6mm, 2x8mm               ...

Replacement track parts for one wheel of the MXW009 Catappi.

If you want to run the MINI-Z 4X4 on any road surface, this is it! The rugged coolness is also improved by attaching the catappi! ***This product requires assembly (approx 1.5hr per pair)***By...

.

.

MXW005 Brass Front HubMachined brass front hub for Mini-Z 4X4. Increases the weight distribution on the front wheels for improved uphill performance.

MXW002R Aluminum Link Rod Set WB120mmAluminum link set for Mini-Z 4X4 w/120mm wheelbase.

MXB03Y BS MX-01 Suzuki Jimny Sierra YellowYellow Suzuki Jimny Sierra autoscale body for Mini-Z 4X4.

Long universal swingshaft set for Mini-Z AWD MA-020.  

Precision cast gear increases durability and efficiency. For Mini-Z buggy rear end.

Allows for ESC setting adjustments to Mini-Z Buggy VE 2.0 via Windows PC.

97054-2R-B LED Light Unit (5mm/2 Bulbs/L=400/Red)5mm Red 2 LED light set. Plugs into open RX slot and includes extension plug for additional light sets.

MXW001R Aluminum Link Rod Set WB110mmAluminum link set for Mini-Z 4X4 w/110mm wheelbase.

MZW432-01 O-Ring&Diaphragm Set(3pcs/for Oil Shock)Rebuild set for MZW432 Shock.

.

MZW443 Inner Tube Pitching Shock (MR03RM)Silicone damper for Mini-Z MR03 RM.Damping effect can be adjusted by viscosity of silicone oil or grease applied.

82042 MINI-Z EVO Receiver Unit Futaba T7PX T7XCReceiver unit for the MINI-Z EVO chassis. Can be used with the Futaba 7PX and 7XC transmitters only.

.

.

.

Mini-Z X-Speed V Motor (AWD 2.4GHz) A high revving motor that increases maximum speed and acceleration.  

 

MZW501 Xspeed VE ECO Tune Brushless Motor

Optional tires for Plazma Formula.

Used for the Li-Fe batteries in the Mini-Z.

.