Tamiya

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

This is Tamiya's Electric Handy Drill Assembly Kit.FEATURES: This is a ready to assemble electric handy drill for use with plastic           ...

This kit lowers the CC-01 chassis by 16mm, giving enhanced stability that optimizes the chassis for on-road use by lowering the center of gravity. At the same time, parts such as the plated dish...

These dampers feature all-new parts, and their main feature is the cylinder: it has an inner diameter of 12mm, 2mm wider than that on the standard Buggy Aeration Damper. As a result, it can hold 40%...

These dampers feature all-new parts, and their main feature is the cylinder: it has an inner diameter of 12mm, 2mm wider than that on the standard Buggy Aeration Damper. As a result, it can hold 40%...

54482 RM-01 Sponge Tire Attachment Cone

The aluminum Motor Mount replaces the kit-standard die-cast metal part to ensure precision shaft attachment, thereby offering increased drivetrain efficiency. The aluminum part is anodized in blue...

The Formula-Tuned Motor (32T) is a high performance electric motor featuring replace-able standard type brushes to ensure a long running life. The end bell features special vents for maximum motor...

Use this special tool to measure ground clearance and suspension droop to calculate R/C cars rebound value.*Compatible chassis: All standard touring car chassis

Optional Two-Speed for the NDF-01 Chassis. Lower first gear and taller second gear provide quicker acceleration and even higher top speeds.Optional Two-Speed for the NDF-01 Chassis. Lower first gear...

This is a dedicated, compact tool for the adjustment of your turnbuckle shafts. Features just the right thickness of material for easy adjusting. Has a stylish blue anodized finish.

53403 RC TB-01 Racing Motor Mount

Tamiya's adhesive aluminum tape is ideal for gas operated vehicles that have an exhaust pipe in close proximity to the polycarbonate body. The aluminum heat resistant tape acts as a shield and...

This is a spare body parts set that recreates the Toyota Celica GT-Four (ST165). It fits on many of Tamiya’s 190mm width, standard wheelbase machines.• Lightweight and durable 1.0mm thick...

This body parts set recreates McLaren Senna. It is made of polycarbonate with mirror and wing detail pieces made of PC-ABS plastic.• Lightweight, durable polycarbonate body realistically captures the...

This is a clear polycarbonate body parts set of the Astute 2022. It is made out of 1mm thick polycarbonate. It may be used on the Tamiya TD2 chassis as a direct replacement body set.Item Contents• 1...

This is a clear polycarbonate body parts set of the Opel Calibra Cliff. It is made out of 1mm thick polycarbonate. The set includes masking seals for the windows and a sticker set to finish the...

This body parts set recreates the 2021 FORD Bronco. It is made of polycarbonate with detail pieces made of PC-ABS plastic.• Lightweight, durable 1.2mm thick polycarbonate body.• Separate PC-ABS H...

This is a complete polycarbonate body parts set of the Toyota GR 86. It may be fitted on various Tamiya touring car chassis platforms.• 1/10 scale R/C body parts assembly kit.• Lightweight and...

This is a complete polycarbonate body parts set of the FORD GT MKII. It may be fitted on various Tamiya touring car chassis platforms.• The ulta-honed form of the car is captured by a lightweight,...

This is a complete spare part body set of the 1991 Audi V8 Touring Car. It may be fitted on many of Tamiya’s touring car platforms.• 1/10 scale R/C body parts set assembly kit.• Polycarbonate...

The popular Ford Mustang GT4 Body Parts Set now comes as a painted version, which is great for those who don’t have the time or confidence to apply a paint job. This body will fit many of Tamiya’s...

Make sure that your R/C car has no gap between its polycarbonate body and urethane bumper, using this handy sponge tape! This will help protect the body from damage, prolonging its life, and even...

Double Cardan shafts used on the front of a vehicle minimize rotational vibration and allow for smoother transmission of power, even while under stress from damper motion or cornering. These 33mm...

This hand-operated straight reamer is designed to enlarge existing holes in molded plastic parts to 3mm diameter with precision. It"s particularly useful in ensuring that holes for parts such as 3mm...

Reamers are incredibly handy when making holes in polycarbonate bodies. This tool features a precision tool steel point that can make holes from 3mm to 13mm in diameter. Features an aluminum grip...

Customize your TRF417 with this Gear Differential Unit. Compared with regular diff units, this unit can be fie tuned by using different strength silicon oils. The gear unit is fully enclosed and is...

The new Tamiya Titanium turnbuckle wrench uses a aluminum handle with a Titanium tip for long lasting wear.Note: this new Titanium turnbuckle wrench does not work with existing Tamiya aluminum or...

This is a new gear differential unit for use on the XV-02 and TT-02 chassis. When using it on the TT-02 chassis, it allows you to tune the differential action, for the front and rear, with the use of...

This Hop-Up Option set is for use with XV-02 chassis cars to help protect the drivetrain from sudden surges and helps compensate for low surface grip.• Slipper Plate A & B x1 each• Slipper Shaft...

This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect...

This Hop-Up Option is for use with the TA08 PRO chassis, and its limited slip effect is especially useful when installed in the rear gearbox, for a highly stable drive. PRO-TIP: This option part is...

This Hop-Up Optiuon is for use with the Tamiya TA-08 4WD chassis. It replaces the front gear diff with a one-way, which facilitates the front wheels to roll freely under deceleration and braking...

This Hop-Up Option is for use in oil gear differentials to improve your R/C model’s cornering. Experiment with different viscosities to find optimal performance.• High-viscosity oil facilitates...

This Hop-Up Option is for use in oil gear differentials to improve your R/C model’s cornering. Experiment with different viscosities to find optimal performance.• High-viscosity oil facilitates...

FEATURES: Cures in a short period of time.          Extremely useful for painting large surfaces.         ...

The Audi Quattro A2 is an iconic Rally Race Car that made its mark in the 1980’s. Tamiya’s 1/10 scale radio control replica brings rally racing fun to hobbyists on the adaptable and easy-driving...

This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic...

The MF-01X is a compact chassis set to revolutionize the M-Chassis genre, and the all-important first model on this platform recreates the legendary Japanese off-roader, the Suzuki Jimny. The Jimny,...

The distinctive rounded, fun form of the Volkswagen Beetle (Type 1) is a familiar sight. The rear wheel drive car is powered by a rear-mounted flat 4 engine and while it has a no-frills interior, its...

This 1/10 scale R/C assembly kit reproduces the Subaru Impreza WRX STI Team Arai which took victory at Rd.5 Rally Hokkaido during the 2011 Asia-Pacific Rally Championship. The sporty form of the...

This is a 1/10 scale R/C assembly kit of the Blitzer Beetle, which was inspired by the exciting off-road desert racer designs seen in the United States. The proven chassis is equipped with 4-wheel...

Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while...

This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is...

DESCRIPTIONTamiya proudly presents the R470 Highline, one of the trucks belonging to Swedish manufacturer Scania's International Truck of the Year 2005 award-winning R Series. Body features...

This is a Tamiya 17.5 wind brushless motor designed to be used with any of Tamiya’s on-road racing cars.• 17.5T motor provides smooth operation at both low and high speeds.• An internal sensor's...

DESCRIPTIONThis is a lightweight version of the Dancing Rider bod. Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your model enhanced stability and nimble handling.• 0...

Adjusting the viscosity of your damper oil is one of the quickest ways of tuning your R/C car. To better support frequent users, these bottles are larger than the ones in previously sold sets - Items...

This is high viscosity silicone oil for use with sealed gear differential units to allow fine diff hardness adjustment to match driving conditions. The #1000000 is the highest viscosity among gear...

When assembling your dampers, this air remover offers you a faster way of drawing out the bubbles to help save you time. This item can be used for machines such as 1/8 Nitro that use long dampers...

A high performance motor for electric radio control car use.A high torque motor designed for endurance race or low speed track.Can be disassembled for maintenance.Blue anodized end bell with brush...

The Type 10 tank, commissioned in 2010, is the latest generation of tank used by the Japan Ground Self Defense Force (JGSDF). It features a new Japanese-made 120mm main gun, in addition to modular...

This variant of the efficient 4WD TT-02 chassis includes a range of option parts, allowing you to compete at the spec level with greater versatility! Aluminum rear uprights give 3-degree toe-in for...

DESCRIPTIONThis new Joint & Cup grease is best suited to fast moving parts. It assists in preventing wear and tear on parts. Other types of grease which have been used in the past tend to dry up...

DESCRIPTIONClear body set of the TamTech-Gear WildBoar.* Compatible chassis: GB-01T, GB-01 (when using with Buggy-type chassis, ITEM 40527 GB-01 Racing Damper Stay is required)

Tamiya 1/10 Astute 2022 - TD-2 Chassis Kit (Painted)This limited-edition version of the Astute 2022 (Item 58697) comes with a pre-painted, and pre-cut body. It’s ideal for new and veteran hobbyists...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for finishing aircraft models. The color is            formulated to provide the authentic tone to 1/32 & 1/48...

FEATURES: Specially developed for decorating transparent Lexan polycarbonate            bodies used in R/C car...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

FEATURES: Specially developed for decorating transparent polycarbonate bodies            used in R/C car modeling...

This 4-Track Crawler is a partner to our products equipped with crawlers such as Item 70211 and 70233 in the Educational Construction Series. This model employs 3-sided crawlers in place of four...

This is a clear polycarbonate body parts set of the Lotus Europa Special. It is made out of 1mm thick polycarbonate. The set includes masking seals for the windows and a sticker set to finish the...

This is a spare body parts set for the Tamiya Fire Dragon R/C kit.• Body is molded in lightweight and durable 0.7mm polycarbonate.• Comes with marking stickers for decoration, and masking stickers...

This R/C kit recreates the classic Lotus Europa Special. The polycarbonate body is paired with the RWD M-06 chassis.The Lotus Europa debuted in 1966, showcasing what was then a revolutionary midship...

Unleashed on the world at the 2018 Geneva International Motor Show, this super car bears the name of legendary racer Ayrton Senna. Its body features extensive carbon fiber sections, and is designed...

This R/C model recreates the Toyota GR Supra GT500. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons...

The Tamiya M-05 chassis is a fun, simple on-road chassis that takes front wheel drive mechanics and puts replica compact cars on top for fun driving thrills. This kit recreates the Suzuki Swift sport...

The Tamiya series of comical buggies has been a great hit among fans of radio control modeling. It’s a fun and unique chassis combined with bodies re-imagining Tamiya classic names in polycarbonate...

This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis.Over 3.5 million...

This R/C assembly car kit replicates the Lancia Rally 037 as raced in the early 1980’s. The highly detailed body is made of durable ABS plastic and it sits on top of Tamiya’s TA-02 S chassis.The...

This radio control model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s...

The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a...

This is an exciting R/C model assembly kit recreating the Team REINERT Racing MAN TGS truck which starred on the 2016 European truck racing circuit. The realistic body is a 4-piece set made from...

The stunning Mercedes-AMG GT3 is a production race car made for the FIA's GT3 class, and first unveiled at the Geneva Motor Show in March 2015. It employs a lightweight body with carbon fiber panels...

The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on-...

As Super As EverTamiya originally released a special version of the R/C 4WD racing buggy Hotshot in 1986. This famous machine is set for a return as the Super Hotshot and features modern improvements...

Customizable Scale RealismThe Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of...

This is a re-issued R/C assembly kit of the Hot Shot. It originally debuted in 1985 as Tamiya’s first 4WD off-road buggy.An R/C Legend ReturnsWith its aggressive-looking body design and low center of...

This all-terrain 2WD buggy R/C assembly kit features a low center of gravity bathtub frame, oil damper-equipped 4-wheel double wishbone suspension, and full ball bearings for an exciting...

Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the...

Tamiya’s series of ultra-realistic 1/14 scale R/C trucks has offered fun and realistic driving for the past several decades! This kit adds to the selection of trucks available in the series with the...

This is a limited-edition version of the Ford Bronco 2021 (Item 58705) kit with pre-painted, pre-cut body and wheel arches, great for not only beginners but also veterans.Note: The body requires...

The Fire Dragon was the machine used by the main character of the manga series "Radicon Boy" and was first released as an R/C model back in 1989. Featuring a unique body styling and parts for a...

The Lunch Box Mini makes its way to the X-SA (Expert-Semi-Assembled) series, offering an all-around, fun 4WD R/C driving experience!About the X-SA seriesKits are a big part of what we do here at...

Make sure that your Tamiya Spray-Work series airbrush is squeaky clean and in peak condition with this handy cleaning and maintenance set. Perfect for cleaning openings both narrow and wide, the...

It’s time to fit your favorite compatible Tamiya R/C vehicle with these optional Track Units. As first seen in the Landfreeder QuadTrack kit, these tracks replace standard wheels and rubber tires...

This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over. High point, neutral brake and brake...

Tamiya’s designers have crafted the next fun to drive 4WD off-road buggy, the Super Avante! The body comes in the form of a re-imagined Avante. It even shares the fun rear wing moniker, “Being Nuts...

Fun to Drive 2WD BuggyThis is a 1/10 scale R/C assembly kit of the 2WD buggy Rising Fighter, which features a simple structure and easy handling for a lot of R/C buggy driving enjoyment. The durable...

This R/C kit recreates the Alpine A110 with an orange Jägermeister livery on top of the proven and fun-to-drive M-06 chassis. The Alpine A110 was a French compact coupe featuring a lightweight FRP...