Tekno RC

TKR9645A - Body (ET48 2.0, w/ window mask) is included with the ET48 2.0 kit and can be used as a replacement part for that vehicle.This item is not directly compatible with other vehicles as it...

TKR9496 – Sway Bar Set (REAR, 2.6, 2.7, 2.8, 2.9, 3.0, ET/NT48 2.0)Vehicle CompatibilityTKR9496 - Sway Bar Set (REAR, 2.6, 2.7, 2.8, 2.9, 3.0, ET/NT48 2.0) is not included with any kit.This can be...

TKR9495 – Sway Bar Set (REAR, 2.1, 2.2, 2.3, 2.4, 2.5, ET/NT48 2.0)Vehicle CompatibilityTKR9495 - Sway Bar Set (REAR, 2.1, 2.2, 2.3, 2.4, 2.5, ET/NT48 2.0) is included with the ET48 2.0 and NT48 2.0...

TKR9494 – Sway Bar Set (REAR, 1.6, 1.7, 1.8, 1.9, 2.0, ET/NT48 2.0)Vehicle CompatibilityTKR9494 - Sway Bar Set (REAR, 1.6, 1.7, 1.8, 1.9, 2.0, ET/NT48 2.0) is not included with any kit.This can be...

TKR9486 – Sway Bar Set (FRONT, 2.6, 2.7, 2.8, 2.9, 3.0, ET/NT48 2.0)Vehicle CompatibilityTKR9486 - Sway Bar Set (FRONT, 2.6, 2.7, 2.8, 2.9, 3.0, ET/NT48 2.0) is not included with any kit.This can be...

TKR9440 – Fuel Tank and Accessories (NT48 2.0, ROAR legal)Vehicle CompatibilityTKR9440 - Fuel Tank and Accessories (NT48 2.0, ROAR legal) is included with the NT48 2.0 kit and can be used as a...

TKR9412 – Gearbox (front, ET/NT48 2.0)This new front gearbox for the ET48 2.0 and NT48 2.0 has been redesigned with additional support for the pinion bearings and improves the lifespan of the...

TKR9397 – Mudguard Adapters (L/R, NT48 2.0)Vehicle CompatibilityTKR9397 - Mudguard Adapters (L/R, NT48 2.0) is included with the NT48 2.0 kit and can be used as a replacement part for that vehicle...

TKR9343B – Air Filter Set (red oil, hose, filter, housing, NB/NT48 2.0)Keep your engine clean and lasting longer with this new filter set! The filter features new oil with improved adherence, helping...

TKR9328B – Chassis Brace Set (revised, NB/NT48 2.0)This chassis brace set for the NB48 2.0 and NT48 2.0 is required for front center driveshaft clearance if you are using TKR9412 – Gearbox (front,...

TKR9269B – Shock Tower (rear, adj. wing/shock, 7075 CNC, GM anodized, EB/NB48 2.0)Improve the handling of your EB/NB48 2.0 with this new 7075 aluminum, CNC machined shock tower! The shock and camber...

TKR9268B – Shock Tower (front, revised links, 7075 CNC, GM ano, EB/NB48 2.0)Improve the handling of your EB/NB48 2.0 with this new 7075 aluminum, CNC machined shock tower! The shock and camber link...

TKR9215B – Brake Cam Set (revised, F/R, 10 degree offset, steel)Vehicle CompatibilityTKR9215B - Brake Cam Set (revised, F/R, 10 degree offset, steel) is included with the NT48 2.0 kit and can be used...

TKR9149A – Differential Cross Pins (7075 alum, hard ano, 2.0, 6pcs)CNC machined from 7075 aluminum and hard anodized, these optional differential cross pins reduce driveline rotating mass and...

TKR67653 – Big Bone Center Driveshaft (HOSS, Rustler 4×4, shaft only)The Tekno RC Big Bone Driveshaft and Outdrives for the HOSS and Rustler 4×4 solve the many issues associated with the stock center...

TKR6765 – Big Bone Center Driveshaft and Outdrives (HOSS, Rustler 4×4)The Tekno RC Big Bone Driveshaft and Outdrives for the HOSS and Rustler 4×4 solve the many issues associated with the stock...

TKR6739 – Shock Pistons (CNC, 5×1.1, flat/flat, 13mm, 2pcs)With these flat 13mm pistons it is now easier than ever to create custom suspension setups based on your needs. Made from a self-lubricating...

TKR6634A – Aluminum Center Diff Support (CNC, 7075, EB/ET410)Improve the durability and tune the flex characteristics of your EB410.2 or ET410 with this new aluminum center diff support! CNC machined...

TKR9102A – Steering Posts (aluminum, gun metal anodized)This item is a direct replacement for TKR5102A and TKR5102.Vehicle CompatibilityTKR9102A - Steering Posts (aluminum, gun metal anodized) is...

Improve the consistency and lifespan of your brakes with these new brake pad return springs! The spring rate has been increased and provides more force to ensure your brakes won’t stick when...

Product DescriptionTKR9676 – Universal Driveshaft (center, rear, ET48 2.0) Vehicle CompatibilityTKR9676 - Universal Driveshaft (center, rear, ET48 2.0) is included with the ET48 2.0 kit and can...

TKR9601 – Chassis (7075, hard anodized, ET48 2.0)This is the stock chassis for the ET48 2.0.Vehicle CompatibilityTKR9601 - Chassis (7075, hard anodized, ET48 2.0) is included with the ET48 2.0 kit...

Product DescriptionTKR9485 – Sway Bar Set (FRONT, 2.1, 2.2, 2.3, 2.4, 2.5, ET/NT48 2.0)Vehicle CompatibilityTKR9485 - Sway Bar Set (FRONT, 2.1, 2.2, 2.3, 2.4, 2.5, ET/NT48 2.0) is included with the...

Product DescriptionTKR9484 – Sway Bar Set (FRONT, 1.6, 1.7, 1.8, 1.9, 2.0, ET/NT48 2.0)Vehicle CompatibilityTKR9484 - Sway Bar Set (FRONT, 1.6, 1.7, 1.8, 1.9, 2.0, ET/NT48 2.0) is not included with...

Product DescriptionTKR9472 – Driveshafts (F/R, hardened steel, ET/NT48 2.0, 2pcs)Vehicle CompatibilityTKR9472 - Driveshafts (F/R, hardened steel, ET/NT48 2.0, 2pcs) is included with the ET48 2.0 kit...

Product DescriptionTKR9464 – Hinge Pin Brace (CNC, 7075, ET/NT48 2.0, D Block) Vehicle CompatibilityTKR9464 - Hinge Pin Brace (CNC, 7075, ET/NT48 2.0, D Block) is included with the ET48 2.0 kit...

Product DescriptionTKR9463 – Hinge Pin Brace (CNC, 7075, ET/NT48 2.0, C Block) Vehicle CompatibilityTKR9463 - Hinge Pin Brace (CNC, 7075, ET/NT48 2.0, C Block) is included with the ET48 2.0 kit...

Product DescriptionTKR9462 – Hinge Pin Brace (CNC, 7075, ET/NT48 2.0, B Block) Vehicle CompatibilityTKR9462 - Hinge Pin Brace (CNC, 7075, ET/NT48 2.0, B Block) is included with the ET48 2.0 kit...

TKR9453 – Diff Pinion (9t, F/R, CNC, ET/NT48 2.0, use with TKR9452)Vehicle CompatibilityTKR9453 - Diff Pinion (9t, F/R, CNC, ET/NT48 2.0, use with TKR9452) is included with the ET48 2.0 kit and can...

Product DescriptionTKR9451 – Turnbuckle (M5 thread, 95mm length, 5mm adjustment, 2pcs) *When using shorter link positions in the front camber.Vehicle CompatibilityTKR9451 - Turnbuckle (M5...

Product DescriptionTKR9450 – Turnbuckle (M5 thread, 108mm length, 5mm adjustment, 2pcs)Vehicle CompatibilityTKR9450 - Turnbuckle (M5 thread, 108mm length, 5mm adjustment, 2pcs) is included with the...

Product DescriptionTKR9429 – Shock Tower (rear, 7075 CNC, GM ano, ET/NT48 2.0) Vehicle CompatibilityTKR9429 - Shock Tower (rear, 7075 CNC, GM ano, ET/NT48 2.0) is included with the ET48 2.0 kit...

Product DescriptionTKR9423 – Turnbuckle (M4 thread, 100mm length, 4mm adjustment, 2pcs)Vehicle CompatibilityTKR9423 - Turnbuckle (M4 thread, 100mm length, 4mm adjustment, 2pcs) is included with the...

TKR8100B – Ackerman Plate (requires TKR9104, EB/NB4 2.0)This part replaces TKR8100 and can be used with TKR8104 on .3 and .4 vehicles.

.

TKR6670 – Spur Gear (70t, 48pitch, composite, black, EB410)The TKR6670 70 tooth black composite spur gear is intended to be used on the EB410 buggy when running a 13.5 (or more) turn motor. If...

TKR6526B – Bell Cranks, Servo Horns, Ackerman Plate (revised, requires TKR6519B)Tekno RC is pleased to announce an updated composite steering Ackerman plate for the EB410. The durability of this new...

FEATURES: Stock front shock springs for the Tekno RC EB48 buggy, optional for the SCT410 short course truck Steel construction, black in color Yellow firmness rating INCLUDES: Two 1.5 x 8.0T, 70mm...

TKR6017T – Shock Shafts w/ TiNi Coating (for 122mm shocks, steel, 2pcs)For use on the following vehicles.NB48.3 (front)EB48.3 (front)NT48.3 (front)ET48.3 (front)SCT410.3 (rear)EB48SL (rear)NT48...

.

FEATURES: Hardened steel construction Used with the parts listed below to convert the SCT410 into a full spec super lightweight 1/8th scale buggy INCLUDES: Two each Adapters, Stub Axles, 17mm Hex...

TKR5569 – 17mm Narrow Wheel Hubs (for TKR5580 axles, lightened, w/pins, 2pcs)These wheel hubs are used to narrow the track width of the EB48SL, which results in a nimbler handling buggy...

FEATURES: Steel construction INCLUDES: Two Left and Right Outer Rear Hinge Pins Four 2.5mm Locknuts

.

.

.

FEATURES: Hardened steel construction INCLUDES: Two Steering Link Turnbuckles

FEATURES: Aluminum construction Replaces stock steel 6.8mm stabilizer balls INCLUDES: Four 6.8mm Stabilizer Balls

.

FEATURES: Composite plastic construction INCLUDES: Left and Right Spindles

FEATURES: Constructed of composite plastic INCLUDES: Left and Right Rear Hubs  

FEATURES: Constructed of 7075 CNC machined aluminum, 0.20" (5mm) thick Gun metal gray in color INCLUDES: Front Shock Tower

FEATURES: Steel construction, black in color INCLUDES: Ten M4x15mm Flat Head Screws REQUIRES: 2.5mm hex wrench SPECS: Length: 15mm Diameter: 4mm  

.

TKR8034 – Hinge Pins (outer, front/rear, EB/NB48.4) Vehicle CompatibilityTKR8034 - Hinge Pins (outer, front/rear, EB/NB48.4) is included with the EB48.4 and NB48.4 kits and can be used as a...

.

TKR9078 – Brass Weight (30g, NB/NT48 2.0)Fine-tune the balance of your NB48 2.0 and enhance steering with this 30-gram brass weight. Designed to fit under the steering bell cranks, the CNC machined...

TKR9077 – Brass Weight (15g, NB/NT48 2.0)Fine-tune the balance of your NB48 2.0 and enhance steering with this 15-gram brass weight. Designed to fit under the steering bell cranks, the CNC machined...

Product DescriptionTKR5188B – Rod Ends (hard, 6.8mm, M4 thread, SCT/SL, 8pcs)These are the stock rod ends for the SCT410.3 and EB48SL.  They are lighter than the original TKR5051 rod ends and...

.

This battery tray was designed for the Tekno RC V3 brushless conversions, but can easily be adapted for use in other setups. Inside dimensions are 150mm L x 50mm W. Height is dependent on your...

.

TKR8104 – Bell Cranks and Top Plates (requires TKR8100, EB/NB/ET/NT/SCT/MT)TKR8104 includes several all new parts to improve steering response and support the TKR8100 Ackermann plate. New bell cranks...

FEATURES: Plastic construction Compatible with the standard build of shocks with the bleeder hole on the side, emulsion style with a screw in the cap, and vented build with a hole in the top of the...

.

FEATURES: Plastic construction, black in color Functions as servo tray and also holds right nerf bar in place INCLUDES: Radio Tray and Right Mud Guard

FEATURES: 1mm thick plastic construction Helps to keep unwanted air out of the body during high speed Offers greater stability during cornering and jumping INCLUDES: Left and Right Air Control Guards...

TKR5424 – Turnbuckle (steering links, 2pcs, MT410)TKR5424 has M5 threading on the ends, is 98mm long, and can be used with TKR1103 (4mm) for easy adjustability.

This is the optional Tekno RC Center/Front Tapered Driveshaft. FEATURES Fits the Tekno RC EB48 and ET48 vehicles Ten grams less rotating mass than...

This is the V2 "D" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum...

This is the V2 "C" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum...

This is the V2 "B" Block Adjustable Hinge Pin Brace for the Tekno RC EB48SL, EB, NB, ET, NT and SCT Vehicles. FEATURES CNC machined 7075 aluminum...

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Four Wheel Nuts SPECS: Hex Size: 17mm

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Two Wheel Hubs with steel Pins

FEATURES: Aluminum construction for light weight Anchors outside of camber steering links in place INCLUDES: Four 6.8mm Aluminum Pivot Balls

FEATURES: Steel construction INCLUDES: Two Outer Rear Hinge Pins Four 3mm Nuts

Tekno RC 12mm Aluminum Hex Adapters for M6 Driveshafts    used on the Traxxas Slash and Stampede 4x4 and the Associated SC10 4x4.FEATURES: Anodized CNC machined aluminum...

This is a package of M4x14mm Button Head Head Screws for the Tekno RC EB48 Buggy. FEATURES Steel construction, black in color ...

FEATURES: Steel construction, black in color INCLUDES: Ten M3x40cm Flat Head Screws REQUIRES: 2mm hex wrench SPECS: Length: 40mm Diameter: 3mm    

.

FEATURES: Made of hardened steel INCLUDES: Two driveshafts SPECS: Length: 3-7/8" Hole diameter: 4.8mm Width between pin ends: 12.7mm Shaft diamter: 3.4mm  

Product DescriptionTKR8730 – Shock Cap Bushings (4pcs, requires TKR8727)Increase the life of your shock caps with these new shock bushings! They are designed to snap in and key with the top surface,...

Product DescriptionTKR6597HD – Diff Coupler (f/r, HD, hardened steel, EB410/ET410)Our new heavy-duty differential coupler retains the same physical dimensions as our standard EB410 and ET410 coupler...

FEATURES: Hard anodized aluminum construction Saves 1.7g of weight over the stock steel bushings without sacrificing durability INCLUDES: Four Aluminum Arm Bushings

These are the Rear Suspension Arms for the Tekno RC EB48.3 and NT48.3. FEATURES Molded plastic composite construction Shifts shock mounting point...

FEATURES: For the inside of steering blocks and rear hub carriers of the Tekno RC SCT410 INCLUDES: Four 10x15x4mm Ball Bearings SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Thickness: 4mm

FEATURES: For the outside of steering blocks of the Tekno RC EB48 and NB48 INCLUDES: Four 8x14x4mm Ball Bearings SPECS: Inner Diameter: 8mm Outer Diameter: 14mm Thickness: 4mm  

FEATURES: For the outside of steering blocks and rear hub carriers of the Tekno RC SCT410 INCLUDES: Four 6x12x4mm Ball Bearings SPECS: Inner Diameter: 6mm Outer Diameter: 12mm Thickness: 4mm

.

FEATURES: Aluminum construction Threads onto shock body to compress or loosen shock spring INCLUDES: Two Rear Shock Adjustment Nuts

FEATURES: 0.16" (4mm) diameter polished hardened steel construction INCLUDES: Two Front Shock Shafts

FEATURES: Hardened steel construction INCLUDES: One each Front and Rear Driveshafts

FEATURES: Constructed of 7075 aluminum, black in color INCLUDES: Front Shock Tower  

These are the optional Front and Rear Universal Driveshafts for the Tekno RC EB48, EB48.2, EB48.3, NB48, and NB48.3 Vehicles. FEATURES CNC machined...

These are the Front Suspension Arms for the Tekno RC EB48.3 and NT48.3. FEATURES Also compatible with the original EB/NB but must be used with...

This is the Rear Shock Tower for the Tekno RC EB48.3 and NB48.3 FEATURES CNC 7075 aluminum, anodized gun-metal gray in color ...

FEATURES: Plastic construction Steel pins INCLUDES: Two Brake Levers and two Brake Cam Stays Two 2x10mm Pins

FEATURES: Steel construction Fits front or rear suspension 2.4mm diameter INCLUDES: Front and rear Swaybar

.

FEATURES: Stock 17mm wheel hubs with no offset Aluminum construction, gun metal gray in color INCLUDES: Two 17mm Wheel Hubs Two Steel Pins