Traxxas

Roll bar (assembled) (fits #9811 or 9812 series bodies)Assembled chrome roll bar for 9811-series TRX-4M™ K10 bodies

Replacement front upper bulkheadReplacement part for these models:X-Maxx® UltimateX-Maxx®XRT® UltimateXRT®

Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

15-tooth pinion gear (48-pitch) fits 2.3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the...

The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the...

Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)Accessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler...

Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5mm PTFE-coated washers (2)/ 2.5x8 CCS (4)Requires: Traxxas #3956X Spur GearAccessory part for...

Tires & wheels, assembled, glued (2.8") (RXT black & chrome wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)Anaconda® performance...

Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)High-performance all-terrain Talon EXT...

Driveshaft, center, plastic, (black)/ screw pinReplacement part for these models:Rustler 4X4Accessory part for these models:Rustler 4X4 VXL

Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)Replacement part for these models:Rustler 4X4 VXLAccessory part for these models:Rustler 4X4

Driveshaft, center, 6061-T6 aluminum (red-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center)Replacement part for these models:Rustler 4X4Accessory part for these models:Rustler 4X4 VXL

Body, Rustler® 4X4, orange & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler®...

Body, Rustler® 4X4, red & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler® 4X4...

Skid plate, roof (body) (orange)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Body, Rustler 4X4, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

The 50-tooth spur gear and 20-tooth pinion gear combo (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let...

Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)Replacement front bumper and mount for 5894 2WD Slash LED light kit.Replacement part for these models:SlashAccessory part...

TRX® 3.3 Engine IPS Shaft w/o StarterThe powerful TRX® 3.3 racing engine with IPS shaft delivers unbeatable performance on or off the track. The engine features a precision composite slide...

Portal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

WideMaxx® Suspension KitA Tougher, Wider StanceThe Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)Accessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4...

Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)Accessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4...

Center differential, complete (fits Hoss™ 4X4 VXL)Accessory part for these models:Hoss™ 4X4 VXL

47-tooth ring and 12-tooth pinion gears for rear differentialsReplacement part for these models:Rustler® 4X4Slash 4X4

Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

LED light harness, rear (requires #2477 wheelie bar mount)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler®Stampede®Accessory part for these models:Bandit®...

Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)Enhance steering precision, strength, and looks with Traxxas aluminum steering...

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)Replacement front bumper for Bandit and 2WD Rustler LED light kits.Replacement part for these...

Rebuild kit, 2200Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x7.5x.19 washer (1), 6x5x15 spacer (1))Replacement...

Heat sink (fits #3351R and #3461 motors)The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on...

Nuts, 3mm nylon locking, black (8)Replacement part for these models:Sledge™

Nuts, 3mm nylon locking, flanged, black (8)Replacement part for these models:Sledge™

Gear set, metal (for 2085 & 2085X servos)Accessory part for these models:X-Maxx

Gear set, metal, high speed (for 2070, 2075 servos)Replacement part for these models:Slash 4X4 UltimateTRX-4 Ford BroncoUnlimited Desert RacerAccessory part for these models:E-Revo VXL...

Gear set (for 2070, 2075 servos)Replacement part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLE-Revo VXL BrushlessFord F-150 RaptorFord GT®Ford Mustang GTRustler 4X4...

Accessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton®SummitTRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped...

Servo, sub-micro, waterproofAccessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® TetonSummitTRX-4® 1979 Chevrolet BlazerTRX-4® 1979 Ford BroncoTRX-4® Equipped...

Wheel hubs, 12mm hex (steel) (2)/ axle pins (2)12 mm steel wheel hex hubs provide superior strength and durability for high-horsepower applications.

The Mini Maxx® LED front bumper incorporates a bright white LED light bar for forward illumination. This is a standard replacement for the LED front bumper used in the 10795 Mini Maxx LED Light Kit...

The Mini Maxx® LED roof skid features white lights in the front with red in the back to enhance rear visibility. This is a standard replacement for the roof skid used in the 10795 Mini Maxx LED Light...

Replacement Mini Maxx® rear planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear.Replacement part for these models:Mini Maxx®

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Replacement Mini Maxx® GTR shock springsReplacement part for these models:Mini Maxx®

The all-metal Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential features a 47-tooth, 32-pitch, steel...

The Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential includes a factory-installed 47-tooth,...

Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762...

Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762...

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Take your Mini Maxx® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish. Genuine Traxxas...

Add extra color to your Mini Maxx® with this heavy-duty roof skid plate and tailgate protector. Made from our toughest composite material, they protect your Mini Maxx's body during rollovers...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

Give your 4-Tec® 2.0 extra style points with this underbody LED light kit. Perfect for track competitions or parking lot honing, the underbody LED light kit casts a colorful glow underneath the car...

Large 5.3″ diameter Maxx® SC belted tires feature wide tread blocks for sure-footed traction on just about any surface. The innovative belted design combines with a long-wearing rubber compound for...

Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

Left and right extended lower shock mounts mount to the suspension arms to increase suspension down travel.Replacement part for these models:Maxx® Slash®

Take your Maxx® Slash® to the next level by replacing the stock front chassis brace with this heavy duty aluminum upgrade. Made from tough 6061-T6 aluminum and brilliantly anodized in high-impact...

Is it time to upgrade your Maxx® Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled...

Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to eliminate play. The...

Replica Raptor R™ hood vent clipless body mount and latches with 3x8 mm screws (5) (fits 10111-series bodies)Replacement part for these models:Ford® F-150® Raptor R™ 4X4

Body, Ford Bronco, complete, gray (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #9735 front & rear...

TRX-4M Portal Axle KitTRX-4M Portal Axle Kit (9843R)A New Level of Off-Road CapabilityJust like the larger TRX-4®, new TRX-4M™ portal axles increase your off-road capability by raising the vehicle at...

Body, Chevrolet K10 Truck (1979), complete (unassembled) (white, requires painting) (includes grille, side mirrors, door handles, roll bar, windshield wipers, & clipless mounting) (requires #9835...

Painted, Decals Applied Unlimited Desert Racer Blue Body

Body, Slash® 4X4, red (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting)Older Slash chassis without clipless mounts will require 6940 (Slash 2WD) or...

Body, Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash 4X4 body comes fully trimmed and ready to paint with decal sheet...

Body, Slash® 4X4, green (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting)Older Slash chassis without clipless mounts will require 6940 (Slash 2WD)...

Body, Slash® VXL 2WD (also fits Slash® 4X4), Fox® Edition (painted, decals applied) (assembled with front & rear latches for clipless mounting)

Body, Slash® 4X4, green (painted, decals applied)

Body, Sledge®, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, Sledge®, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, X-Maxx® Ultimate, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix X-Maxx body comes fully trimmed and ready to paint with decal sheet...

Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

Body, X-Maxx® Ultimate, blue (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts will...

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts...

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), green (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts...

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), blue (painted, decals applied) (assembled with front & rear latches for clipless mountingOlder Slash chassis without clipless mounts will...

Body, Slash® 2WD, ProGraphix® (also fits Slash® VXL & Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash body comes fully trimmed...

Body, 2017 Ford Raptor®, Fox (heavy duty)/ decals (includes latches and latch mounts for clipless mounting)

Body, 2017 Ford Raptor®, heavy duty (clear, requires painting)/decals (includes latches and latch mounts for clipless mounting)The clear 2017 Ford Raptor body comes fully trimmed and ready to paint...

Painted, Decals Applied Green/Blue Body w/ Wing for Bandit & Bandit VXL

Painted, Decals Applied Orange/Blue Body w/ Wing for Bandit & Bandit VXL

Body, Bandit®, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Bandit body comes fully trimmed and ready to paint with decal sheet,...

Painted, Decals Applied Black/Red Body w/ Wing for Bandit & Bandit VXL

Painted, Decals Applied Blue Body w/ Wing for Bandit VXL

Painted, Decals Applied Purple Body w/ Wing for Bandit VXL

Body, Bandit® VXL, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Bandit body comes fully trimmed and ready to paint with decal...

Body, Ford Mustang, complete (white) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)