Traxxas

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

The Mini Maxx® LED rear bumper incorporates two red LED light bars to enhance rear visibility. This is a standard replacement for the LED rear bumper used in the 10795 Mini Maxx LED Light Kit. Fits...

The Mini Maxx LED light kit is built Traxxas Tough™, with factory fit and finish for easy installation. The kit includes new front and rear bumpers with white forward-facing LEDs, and rear-facing red...

Replacement differential gear set includes output gears (2), output gear shaft, planetary gears (4), planetary gear shafts (4), and differential spacers (2).

The replacement differential comes completely assembled and ready to install. Fits front or rear.Assembled Differential w/ 12-Tooth Ring Gear

Replacement front planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear.

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

Use this rear differential pinion gear when installing the shorter 10757-series center driveshaft along with the optional 10758 slipper clutch or 10760-series center differential in your vehicle...

The 47-tooth center differential spur gear (32-pitch) is made from steel for maximum power handling and durability. The spur gear must be used with optional center differentials 10760 or 10760R...

The 47-tooth differential spur gear (32-pitch) lets you fine-tune the performance of your vehicle. Changing gear ratios can help balance acceleration and top speed for different running conditions...

Replacement composite center driveshaft

Replacement Extreme HD driveshaft assembly comes complete and ready to install. Includes screw pin. Fits front or rear, left or right.

Replacement steel differential drive cup for the 10750X extreme heavy-duty steel CV driveshaft set. Includes screw pin.

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Pair of replacement 61 mm fixed-length toe links come assembled with hollow balls

This easy-to-install kit replaces the standard inner suspension pins your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x45 mm pins (4).

This easy-to-install kit replaces the standard outer suspension pins on your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x34 mm pins (4) with 3x37 mm pins(4).

The replacement suspension screw pin set includes 3x40 mm pins (6), 3x32 mm pins (4), 3x28 mm pins (4), and 3x46 mm pins (2). Fits front or rear.

Add more color to your Mini Maxx® with these replacement steering blocks.Accessory part for these models:Mini Maxx®

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Add more color to your Mini Maxx® with these green replacement caster blocks (C-hubs).Accessory part for these models:Mini Maxx®

Replacement Mini Maxx® front suspension arm set. Includes upper arms (2) and lower left and right arms.

Take your Mini Maxx® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish. Genuine Traxxas...

Replacement front and rear clipless body mount latches for 10711-series Mini Maxx bodies.

With 21 turns of pure copper wire, the Titan® Drift motor delivers smooth, predictable power at any RPM to initiate a slide with the blip of the throttle. An internal fan routes cooling air through...

Tires, Hoosier® (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2)Replacement part for these models:Slash® Modified

Add strength and style to your Maxx® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Complete Steel-Core driveshaft assembly. Fits front or rear, left or right side. Includes screw pin.

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Replacement Maxx® Slash® rear bumper for trucks with the 10290 LED light kit.

Traxxas aluminum caster blocks (C-hubs) take an already proven design and ratchet up the toughness and durability with 6061-T6 aluminum. The hubs are carefully machined from a block of aluminum to...

Traxxas aluminum caster blocks (C-hubs) take an already proven design and ratchet up the toughness and durability with 6061-T6 aluminum. The hubs are carefully machined from a block of aluminum to...

Traxxas aluminum caster blocks (C-hubs) take an already proven design and ratchet up the toughness and durability with 6061-T6 aluminum. The hubs are carefully machined from a block of aluminum to...

Roll bar (assembled) (fits #9811 or 9812 series bodies)Assembled chrome roll bar for 9811-series TRX-4M™ K10 bodies

Replacement front upper bulkheadReplacement part for these models:X-Maxx® UltimateX-Maxx®XRT® UltimateXRT®

Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

15-tooth pinion gear (48-pitch) fits 2.3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...

The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the...

The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the...

Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)Accessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler...

Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5mm PTFE-coated washers (2)/ 2.5x8 CCS (4)Requires: Traxxas #3956X Spur GearAccessory part for...

Tires & wheels, assembled, glued (2.8") (RXT black & chrome wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)Anaconda® performance...

Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)High-performance all-terrain Talon EXT...

Driveshaft, center, plastic, (black)/ screw pinReplacement part for these models:Rustler 4X4Accessory part for these models:Rustler 4X4 VXL

Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)Replacement part for these models:Rustler 4X4 VXLAccessory part for these models:Rustler 4X4

Driveshaft, center, 6061-T6 aluminum (red-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center)Replacement part for these models:Rustler 4X4Accessory part for these models:Rustler 4X4 VXL

Body, Rustler® 4X4, orange & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler®...

Body, Rustler® 4X4, red & blue/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Is it time to upgrade your Rustler® 4X4...

Skid plate, roof (body) (orange)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Body, Rustler 4X4, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

The 50-tooth spur gear and 20-tooth pinion gear combo (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let...

Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)Replacement front bumper and mount for 5894 2WD Slash LED light kit.Replacement part for these models:SlashAccessory part...

TRX® 3.3 Engine IPS Shaft w/o StarterThe powerful TRX® 3.3 racing engine with IPS shaft delivers unbeatable performance on or off the track. The engine features a precision composite slide...

Portal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)Accessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4...

Center differential, complete (fits Hoss™ 4X4 VXL)Accessory part for these models:Hoss™ 4X4 VXL

47-tooth ring and 12-tooth pinion gears for rear differentialsReplacement part for these models:Rustler® 4X4Slash 4X4

Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

LED light harness, rear (requires #2477 wheelie bar mount)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler®Stampede®Accessory part for these models:Bandit®...

Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)Enhance steering precision, strength, and looks with Traxxas aluminum steering...

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)Replacement front bumper for Bandit and 2WD Rustler LED light kits.Replacement part for these...

Rebuild kit, 2200Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x7.5x.19 washer (1), 6x5x15 spacer (1))Replacement...

Nuts, 3mm nylon locking, black (8)Replacement part for these models:Sledge™

Gear set, metal (for 2085 & 2085X servos)Accessory part for these models:X-Maxx

Gear set, metal, high speed (for 2070, 2075 servos)Replacement part for these models:Slash 4X4 UltimateTRX-4 Ford BroncoUnlimited Desert RacerAccessory part for these models:E-Revo VXL...

Gear set (for 2070, 2075 servos)Replacement part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLE-Revo VXL BrushlessFord F-150 RaptorFord GT®Ford Mustang GTRustler 4X4...

Accessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton®SummitTRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped...

Servo, sub-micro, waterproofAccessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® TetonSummitTRX-4® 1979 Chevrolet BlazerTRX-4® 1979 Ford BroncoTRX-4® Equipped...

Wheel hubs, 12mm hex (steel) (2)/ axle pins (2)12 mm steel wheel hex hubs provide superior strength and durability for high-horsepower applications.

The Mini Maxx® LED front bumper incorporates a bright white LED light bar for forward illumination. This is a standard replacement for the LED front bumper used in the 10795 Mini Maxx LED Light Kit...

The Mini Maxx® LED roof skid features white lights in the front with red in the back to enhance rear visibility. This is a standard replacement for the roof skid used in the 10795 Mini Maxx LED Light...

Replacement Mini Maxx® rear planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear.Replacement part for these models:Mini Maxx®

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...