Traxxas

Tires & wheels, assembled, glued (2.2" classic chrome wheels, Canyon Trail 5.3x2.2" tires, foam inserts) (2)/ center caps (front (2), rear (2)) (requires #8255A extended thread stub...

Tires and wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 1.9 tires) (2)/ center caps (2)/ decal sheet (requires #8255A extended stub axle) Replacement part for these models: TRX-4 Ford...

Wheels, Method 105 1.9" (charcoal gray, beadlock) (beadlock rings sold separately)

Beadlock rings, satin (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

.

.

Steering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit) Accessory part for these...

.

Long Arm Lift Kit, TRX-4, complete (includes red powder coated links, red-anodized shocks) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail...

Push bar, bumper, chrome (assembled) (fits #8137 bumper)Accessory part for these models:TRX-4® 1979 Chevrolet Blazer

Bumper, front (chrome)/ bumper mount/ 3x10 BCS (2)Replacement part for these models:TRX-4 1979 Chevrolet BlazerAccessory part for these models:TRX-4 Mercedes-Benz® G 500® 4X4²

Traction boards, green/ mounting hardwareAccessory part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped with Traxx®TRX-4® Mercedes-Benz®...

Expedition rack/ mounting hardware (fits #8111 or #8111R body)Replacement part for these models:TRX-4® Equipped with Traxx™TRX-4® Sport Unassembled KitAccessory part for these models:TRX-4® 1979...

Spare tire mount/ mounting hardwareAccessory part for these models:TRX-4 1979 Chevrolet BlazerTRX-4 Ford BroncoTRX-4 Mercedes-Benz® G 500® 4X4²TRX-4 Scale and Trail CrawlerTRX-4 Sport Unassembled...

.

TRX-4 1969 & 1972 Chevrolet Blazer Pro Scale LED Light SetTRX-4 1969 Chevrolet Blazer Pro Scale Lighting Set (#8090X) Rear View (Close-Up)All the lighting control of a full-scale Blazer is at...

TRX-4 SPORT LIGHT KITSHit the Trail Day or Night with Rock-Solid ReliabilityTRX-4 Sport with Light Kit (#8085, Sold Separately)Genuine Traxxas LED light kits for the TRX-4 Sport are engineered with...

.

.

Axle shaft, front, heavy duty (left & right)/ portal drive input gear (machined) (2) (assembled)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED light set for your TRX-4® 1979 Ford® Bronco or F-150® High Trail Edition™. Turn the headlights on and off...

Body, Ford Bronco (1979), complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, spare tire mount, decals, window masks) (requires #8072 inner...

Suspension arms, upper, (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material...

.

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Is it time to upgrade your X-Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. X-Maxx bodies come fully-assembled and ready...

Tires, Maxx® 2.8" (2)/ foam inserts (2)Replacement part for these models:Stampede 4X4Accessory part for these models:Bigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed...

Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)

Pair of 5x11x4 mm black rubber seal stainless ball bearings. A step above blue-seal bearings, stainless black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in...

Suspension arms , rear (left & right), heavy duty (2) BlackHeavy-duty rear suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite with just the...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Built Traxxas Tough™The Traxxas Hoss 4X4 unleashed a new era of extreme monster truck fun and now there’s a LED light kit built to the same standard. Designed to handle the toughest action and most...

The Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss® 4X4, Rustler® 4X4, or Slash® 4X4 into the ultimate bashing machine. Engineered for extreme brushless power systems, the kit...

Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)Made from hardened steel,...

Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension.Accessory part for these models:Hoss® 4X4...

Front Shock Tower Replacement part for these models:Jato® 4X4 BrushlessJato® 4X4 VXL

Camber links, front, 90mm (80mm center to center) (2) (assembled with hollow balls)Replacement part for these models:Jato® 4X4 BrushlessJato® 4X4 VXL

Toe links, front (TUBES red-anodized, 6061-T6 aluminum) (2) (for use with #8995 WideMaxx® suspension kit)Traxxas TUBES aluminum WideMaxx® toe links are lighter than steel and stronger than titanium...

Toe links, E-Revo VXL (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 10mm (1)

Toe links, front, Unlimited Desert Racer® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (102mm) (2) (assembled with rod ends and hollow balls)/ aluminum wrench, 7mm (1)Accessory...

Motor mount plate, TRX-4, 6061-T6 aluminum (red-anodized)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

Ring gear, differential/ pinion gear, differential (underdrive, machined) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical...

Grill, Ford Bronco/ grill retainers (3)/ headlight housing (2)/ lens (2) (fits #8010 body) Grill, Ford Bronco/ grill retainers (3)/ headlight housing (2)/ lens (2) (fits #8010 body) Grill, Ford...

Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)Traxxas’ aluminum toe links make it easy to add strength...

Left and right Raptor R™ replica side mirrors. Includes 3x14 mm screws (2) (fits 10111-series bodies)Replacement part for these models:Ford® F-150® Raptor R™ 4X4

Body, Ford Raptor R, complete (Fox®) (includes grille, tailgate trim, side mirrors, decals, & clipless mounting) (requires #10124 & 10125 body mounts)The Ford® Raptor R™ Fox body comes fully...

Body conversion kit, 1/18 scale TRX-4MT™ Bigfoot® No. 1 (includes front grille, engine detail & decals) (fits #9812 body)

Decal sheet, 1/18 scale TRX-4MT™ Bigfoot® No. 1

Shocks, GT-Maxx®, aluminum (orange-anodized) (fully assembled w/o springs) (2)

Body, Sledge®, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Bulkhead, rear (lower)/ motor mount washers (steel) (4)/ 4x18mm BCS (4)

Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Wing, Ford Fiesta® ST Rally (black)/ body posts, rear/ 3x8mm FCS (4) (fits #7412 series bodies)

Slipper clutch, complete (for Slash 4x4)

Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies...

Suspension arms, green, front/rear (left & right), heavy duty (2)

Suspension arms, black, front/rear (left & right), heavy duty (2)

Shock tower (rear)

Shock tower (rear) (for clipless body mounting)

The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience.

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

The Mini Maxx ProGraphix body comes fully trimmed and ready to paint with decal sheet, pre-applied overspray film, and clipless body latches with hardware.For best results, use Traxxas ProGraphix...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

The clear Mini Maxx body comes fully trimmed and ready to paint with decal sheet, window masking, pre-applied overspray film, and clipless body latches with hardware.For best results, use Traxxas...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

The Mini Maxx® LED rear bumper incorporates two red LED light bars to enhance rear visibility. This is a standard replacement for the LED rear bumper used in the 10795 Mini Maxx LED Light Kit. Fits...

Replacement differential gear set includes output gears (2), output gear shaft, planetary gears (4), planetary gear shafts (4), and differential spacers (2).

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

Use this rear differential pinion gear when installing the shorter 10757-series center driveshaft along with the optional 10758 slipper clutch or 10760-series center differential in your vehicle...

The 47-tooth center differential spur gear (32-pitch) is made from steel for maximum power handling and durability. The spur gear must be used with optional center differentials 10760 or 10760R...

The 47-tooth differential spur gear (32-pitch) lets you fine-tune the performance of your vehicle. Changing gear ratios can help balance acceleration and top speed for different running conditions...

Replacement Extreme HD driveshaft assembly comes complete and ready to install. Includes screw pin. Fits front or rear, left or right.

Replacement steel differential drive cup for the 10750X extreme heavy-duty steel CV driveshaft set. Includes screw pin.

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Pair of replacement 61 mm fixed-length toe links come assembled with hollow balls

This easy-to-install kit replaces the standard inner suspension pins your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x45 mm pins (4).

This easy-to-install kit replaces the standard outer suspension pins on your mini with premium hardened-steel pins for maximum strength and durability. Includes 3x34 mm pins (4) with 3x37 mm pins(4).

The replacement suspension screw pin set includes 3x40 mm pins (6), 3x32 mm pins (4), 3x28 mm pins (4), and 3x46 mm pins (2). Fits front or rear.

Add more color to your Mini Maxx® with these replacement steering blocks.Accessory part for these models:Mini Maxx®

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...