Traxxas

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)

Push rods, aluminum (red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)Accessory part for these models:E-Revo® VXL Brushless

Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)Accessory part for these models:E-Revo® VXL Brushless

Push rods (steel), heavy duty (2) (assembled with rod ends)Accessory part for these models:E-Revo® VXL Brushless

.

.

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

.

Body reinforcement set (fits #8611 body)Accessory part for these models:E-Revo VXL Brushless

Linkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)

.

.

.

.

.

.Gear set, center differential (output gears (2)/ spider gears (4) Replacement part for these models: Unlimited Desert Racer)

Gear set, differential (front) (output gears (2)/ spider gears (4)) Replacement part for these models: Unlimited Desert Racer)

Carrier, differential (front or center)/ x-ring gaskets (2)/ ring gear gasket/ 14.5x20 TW (2)

.

.

.

.

.

.

Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)

Drive cup (1)/ 2.5x10 CS (use only with #8550 driveshaft) Replacement part for these models: Unlimited Desert Racer

Driveshaft, steel constant-velocity (shaft only, 96mm) (1) Replacement part for these models: Unlimited Desert Racer

Suspension pin set (front) (3x51mm (2), 3x54mm (2), 3x93mm (2) Replacement part for these models: Unlimited Desert Racer

.

Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Replacement part for these models: Unlimited Desert Racer

Suspension link, rear (upper) (steel) (4x206mm, center to center) (2) (assembled with hollow balls)

.

.

Suspension arm, lower right/ arm insert (assembled with hollow ball)

Suspension arms, upper (left & right) (assembled with hollow balls)

.

2-in-1 wire harness, LED lights (high-voltage)Replacement part for these models:Unlimited Desert Racer®Accessory part for these models:Unlimited Desert Racer®

LED light bar, roof (curved, high-voltage) (52 white LEDs (single row), 202mm wide)

LED light bar, front (high-voltage) (52 white LEDs (double row), 100mm wide)

.

.

Shocks, GTR, 139mm, aluminum (red-anodized) (fully assembled w/o springs) (rear, threaded) (2) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (red-anodized) (front, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (blue-anodized) (front or rear, threaded)  Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 134mm, aluminum (red-anodized) (fully assembled w/o springs) (front, no threads) (2)

Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

Nuts, 5mm flanged nylon locking (aluminum, black-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

.

Spring, shock, 139mm (natural finish) (GTR) (progressive, 0.937 rate, orange stripe) (2) Accessory part for these models: Unlimited Desert Racer

.

This highly detailed and realistic Cadillac CTS-V body for the 4-Tec 2.0 comes pre-cut, painted with applied decals, and includes a body mount for the 4-Tec 2.0 chassis. The body includes injection...

This highly detailed and realistic Cadillac CTS-V body for the 4-Tec 2.0 comes pre-cut, painted with applied decals, and includes a body mount for the 4-Tec 2.0 chassis. The body includes injection...

Body, Cadillac CTS-V (clear, requires painting)/ decal sheet (includes side mirrors, spoiler, & mounting hardware) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD...

Body, Chevrolet Corvette Z06, blue (painted, decals applied)Accessory part for these models:4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisFord GT®Ford Mustang GT

Drive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT ​

Driveshafts, steel constant-velocity (assembled), rear (2) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT

.

Turnbuckles, aluminum (blue-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench Accessory part for these models: 4-Tec 2.0 AWD...

Turnbuckles, aluminum (green-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench Accessory part for these models: 4-Tec 2.0 AWD...

Mounts, suspension arms, aluminum (blue-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Mounts, suspension arms, aluminum (green-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x10.3 pins (5) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail...

Motor mount plate, TRX-4, 6061-T6 aluminum (charcoal gray-anodized)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

Ring gear, differential/ pinion gear, differential (overdrive, machined) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical...

Portal drive axle mount, rear, 6061-T6 aluminum (blue-anodized) (left and right)/ 2.5x16 CS (4)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Portal drive axle mount, rear, 6061-T6 aluminum (charcoal gray-anodized) (left and right)/ 2.5x16 CS (4)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Portal housings, inner (front), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 3x12 BCS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Servo horn, steering, metal/ 3x14 BCS (1) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

Caster blocks, 6061-T6 aluminum (green-anodized), left and rightAccessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone greaseAccessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Equipped with...

Battery strap (for 2200 2-cell and 1400 3-cell LiPo batteries)Accessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Equipped with Traxx™TRX-4® Ford BroncoTRX-4® Mercedes-Benz® G 500®...

.

.

.

.

Wheels, Method 105 2.2" (charcoal gray, beadlock) (beadlock rings sold separately) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4...

Wheels, Method 105 2.2" (black chrome, beadlock) (beadlock rings sold separately)

Beadlock rings, blue (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, red (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, black (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

Beadlock rings, red (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Shocks, GTS, silver aluminum (assembled without springs) (4) (for use with #8140 TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

Steering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit) Accessory part for these...

Suspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4...

Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4...

Suspension link, front upper, 5x68mm (1) (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4...

Suspension link, front upper, 5x68mm (1) (steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4...

Suspension links, front lower, red (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Suspension links, front lower (2) (5x104mm steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4...

Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4...

Long Arm Lift Kit, TRX-4, complete (includes blue powder coated links, blue-anodized shocks) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail...

Mirrors, side (folding) (fits #8130 body)Accessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Equipped with Traxx™TRX-4® Ford BroncoTRX-4® Mercedes-Benz® G 500® 4X4²TRX-4® Scale and...

Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #8130 body)Replacement part for these models:TRX-4 1979 Chevrolet BlazerAccessory part for these models:TRX-4 Ford...