Traxxas

Replacement front and rear chrome bumpers for 9812-series TRX-4M™ F-150® bodiesReplacement part for these models:TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

Chrome push bar fits 9834 front bumper mountAccessory part for these models:TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

Portal drive housings, front, inner & outer (left & right)/ caster blocks (portal drive), left or right (2)

Replacement front and rear shock mounts for TRX-4MT™ monster trucks.Replacement part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck

9830 Rear Portal Drive Axle Shafts (2) for TRX-4M

Replacement shock mounts and extended trailer hitch for 9851 TRX-4M™ Long Arm Lift Kit. Includes hardware.Replacement part for these models:TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™TRX-4M™...

Front and rear clipless body mount latches for 9812-series F-150® bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Ford® F-150® High Trail...

Replacement chrome side trim for 9812-series TRX-4M™ F-150® bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Ford® F-150® High Trail...

Replacement front and rear body lenses for 9812-series TRX-4M® F-150® bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Ford® F-150® High Trail...

Replacement front grille and rear tailgate panel for 9811-series TRX-4M™ K10 bodies. Includes LED lenses.Replacement part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4M™ 1/18...

Replacement chrome front grille and white tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Accessory part for these models:TRX-4MT™ 1/18 1979 Ford® F-150®...

Replacement chrome front grille and red tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Accessory part for these models:TRX-4MT™ 1/18 1979 Ford® F-150®...

Replacement chrome front grille and green tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Accessory part for these models:TRX-4MT™ 1/18 1979 Ford® F-150®...

Replacement chrome front grille and brown tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Replacement part for these models:TRX-4MT™ 1/18 1979 Ford®...

Replacement chrome front grille and blue tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Replacement part for these models:TRX-4MT™ 1/18 1979 Ford®...

Replacement chrome front grille and black tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Replacement part for these models:TRX-4MT™ 1/18 1979 Ford®...

Replacement chrome front grille and unpainted tailgate panel for 9812-series TRX-4M™ F-150® bodies. Includes left and right rear LED lenses.Replacement part for these models:TRX-4M™ 1/18 1979 Ford®...

Replacement front and rear body lenses for 9811-series TRX-4M™ K10 bodiesReplacement part for these models:TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster TruckTRX-4M™ 1/18 1979 Chevrolet® K10 High Trail...

From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab...

Already standard on the Drag Slash®, this pre-assembled differential comes filled with 500k differential oil for launching hard off the line. The differential is ready-to-install in any Magnum 272R™...

Replacement steel external-spline half shaft for 9450R steel CV driveshaftsAccessory part for these models:Bandit® VXLBandit®Drag Slash 1967 Chevrolet® C10 TruckDrag Slash Ford® Mustang® 5.0

Set of six 1.6x10 mm button-head self-tapping screws with hex drive headsReplacement part for these models:TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Ford® F-150® High Trail Edition™

Toe links (molded composite) (78mm center to center) (2) (assembled with hollow balls) (for use with #9180 or 9181 upgrade kit)Replacement part for these models:Rustler® BrushlessRustler®

Camber links, front (molded composite) (69mm center to center) (2) (assembled with hollow balls) (for use with #9180 or 9181 upgrade kit)Replacement part for these models:BIGFOOT® No. 1 Officially...

Camber links, rear (molded composite) (82mm center to center) (2) (assembled with hollow balls) (for use with #9180 upgrade kit)Replacement part for these models:BIGFOOT® No. 1 Officially Licensed...

Camber links, rear (molded composite) (73mm center to center) (2) (assembled with hollow balls) (for use with #9181 upgrade kit)

Toe links (molded composite) (75mm center to center) (2) (assembled with hollow balls) (for use with #9182 upgrade kit)Replacement part for these models:Bandit®

Camber links, front (molded composite) (67mm center to center) (2) (assembled with hollow balls) (for use with #9182 upgrade kit)Replacement part for these models:Bandit®

Camber links, rear (molded composite) (56mm center to center) (2) (assembled with hollow balls) (for use with #9182 upgrade kit)Replacement part for these models:Bandit®

Toe links (molded composite) (96mm center to center) (2) (assembled with hollow balls) (for use with #9180 upgrade kit)Replacement part for these models:BIGFOOT® No. 1 Officially Licensed...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough Bandit® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full complement of driveline and...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough Bandit® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full complement of driveline and...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough Bandit® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full complement of driveline and...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Slash® or 2WD Raptor® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Slash® or 2WD Raptor® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Slash® or 2WD Raptor® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Stampede®, 2WD Rustler®, or 2WD BIGFOOT® into the ultimate bashing machine. Engineered for brushless power systems, the kit...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Stampede®, 2WD Rustler®, or 2WD BIGFOOT® into the ultimate bashing machine. Engineered for brushless power systems, the kit...

The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Stampede®, 2WD Rustler®, or 2WD BIGFOOT® into the ultimate bashing machine. Engineered for brushless power systems, the kit...

Fixed gear adapterReplacement part for these models:BIGFOOT® 4X4 Brushless Officially Licensed ReplicaFord® F-150® Raptor R™ 4X4Stampede® 4X4 Brushless

Ultra-rugged Sledgehammer® tires provides extreme traction and control for a variety of off-road terrain. The Sledgehammer's increased overall diameter provides additional ground clearance, while the...

Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). Axle carriers are for use with the 9080-series upgrade kit...

Front & Rear Sway Bar MountReplacement part for these models:Jato® 4X4 BrushlessJato® 4X4 VXL

Replacement rear shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts.Replacement part for these...

91 mm camber links (80 mm center to center) come assembled with rod ends and hollow ballsReplacement part for these models:Rustler® 4X4 VXLSlash® 4X4 VXL EHDStampede® 4X4 VXLAccessory part for these...

Toe links, molded composite, 98mm (88mm center to center) (black) (2)/ steering link (1)Replacement part for these models:Jato® 4X4 BrushlessJato® 4X4 VXL

Chassis brace (T-Bar) (center)Replacement part for these models:Jato® 4X4 Brushless

 Jato® 4X4 Brushless, Body (painted, decals applied)Replacement part for these models:Jato® 4X4 Brushless

 Jato® 4X4 Brushless, Body (painted, decals applied)Replacement part for these models:Jato® 4X4 Brushless

The WideMaxx® half shaft set includes four internal-spline shafts and four external-spline shafts to create four telescoping driveshafts (plastic parts only). Fits front or rear, left or right. Must...

Boost performance and reduce maintenance on your Maxx® or Maxx® Slash® with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings...

Give your 1/10 scale E-Revo VXL a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel hardware for...

The mod 1 (1.0 metric pitch) 44-tooth steel spur gear fits the 8980 center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

Set of four 17 mm gray-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

Left and right aluminum stub axle carriers boost the appearance and strength of your 4-Tec®. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish...

Left and right aluminum stub axle carriers boost the appearance and strength of your 4-Tec®. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish...

Left and right aluminum stub axle carriers boost the appearance and strength of your 4-Tec®. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish...

Rebuild kit for 4-Tec® 2.0 8350X steel CV-driveshafts. Includes pins and O-rings for two axles.

Aluminum Battery Hold-Down Take your 4-Tec® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly...

Replacement front chrome bumper for 9830-series TRX-4® F-150® High Trail® edition bodies. Includes bumper mount and 3x10 mm screws (2).Replacement part for these models:TRX-4® Ford® F-150® High Trail...

Replacement center half-shaft set includes short internal-spline halves (3) and long internal-spline halves (2).Replacement part for these models:TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford®...

Replacement driveshaft kit for the extended center driveshafts used on the TRX-4® Long Arm Lift Kit. Includes extra-long internal-splined shafts (2), long internal-splined shaft, medium...

Replacement center half shafts. Includes 2 shafts and 4 pin retainers.Replacement part for these models:TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979...

The 27-tooth pinion gear (1.0 metric pitch) is machined from hardened steel for extra durability and fits 5 mm motor shafts. Traxxas pinion gears let you fine-tune the performance of your Traxxas...

The TRX-4M® Brushless Power System gives you up to 50% more speed, more crawling torque, and greater precision than brushed power systems. Rip wheelies in your monster truck or navigate a technical...

The Bandit®® body includes front and rear canopy with wing and decal sheet. From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest...

Body, Slash® Modified (clear, trimmed, requires painting)/ decal sheetsAccessory part for these models:Slash® Modified

Wheels, TRX-6® Big Rig 2.2" (black chrome) (rear) (2)/ center caps (black chrome) (2)Pair of 2.2" black chrome TRX-6® Big Rig rear wheels with center caps (2)Replacement part for these models:TRX-6®...

Sticky 2.0″ Response tires with Traxxas® logo provide razor-sharp handling and superior grip on pavement with a slick tread design and high-grip rubber compound. Tires come pre-mounted and glued to...

Rear window and engine cover for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body with 2.6x8 mm screws (8)Replacement part for these models:Chevrolet® Corvette® Stingray

Molded body accessories for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body include tail lights (2), wing, rear vents (2), mounts, 2.6x8 mm screws (2), 1.6x5 mm screws (4), and 1.6x7 mm...

Left and right replica exhaust tips for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body with 2.6x8 mm screws (4)Replacement part for these models:Chevrolet® Corvette® Stingray

Rear clipless body latch with replica engine detailing for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray body.Replacement part for these models:Chevrolet® Corvette® Stingray

Front clipless body latch for the 9311-series 4-Tec® 3.0 Chevrolet® Corvette Stingray bodyReplacement part for these models:Chevrolet® Corvette® Stingray

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with...

Replacement left and right rear axle carriers for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x31 mm hinge pins (2) and 3x18 mm screws (2). Parts are compatible with...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right steering blocks for 9180, 9181, and 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9180 and 9181-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement left and right caster blocks (c-hubs) for 9182-series 2WD Extreme Heavy Duty Upgrade Kits. Includes 3x26 mm hinge pins (2) and 3x15 mm screws (2). Parts are compatible with non-EHD parts...

Replacement LED headlights with wire harness for 8090 LED light kits. Fits #9112, 9130 & 9131 series bodiesAccessory part for these models:TRX-4

Replacement LED headlights with wire harness for 8035 LED light kits. Fits 8010-series bodiesAccessory part for these models:TRX-4® 1979 Ford® Bronco®

Add some high-impact style to your X-Maxx® with these ready-to-mount wheels and tires. The wheels come pre-assembled and glued to Maxx® AT 8.0″ x 4.0″ tires with foam inserts. Sold as a left and...

Gravel-pattern rally tires offer superior traction on pavement, dirt, gravel, and more with a unique directional tread pattern captured in high-grip rubber. Tires come pre-glued and mounted with foam...

Set of six 3x8 mm cap-head machine screws with hex-drive headsReplacement part for these models:Maxx® Slash®

Wheel discs (yellow) (4)

Wheel discs (white) (4)

Wheel discs (green) (4)

Wheel discs (gray) (4)

Wing, (black)Replacement part for these models:Slash® Modified

Replacement lenses for the 10350 boat trailer. Includes side marker lights and lenses (6) and 2.8 x 8 mm black stainless screws (12).Replacement part for these models:Tandem-Axle Boat...

Support posts, boat trailer (17mm (8), 30mm (8), 35mm (2), 37mm (8), 38mm (2), 40mm (2), 43mm (2), 65mm (4), 70mm (4))/ bunk boards (8)Replacement part for these models:Tandem-Axle Boat Trailer

Replacement top and bottom rear crossmembers with tail light lenses, 1.6x10 mm (8), 3x5 mm (7), and 3x15 mm (6) stainless screws and square nuts (4). Fits 10350 boat trailer.Replacement part for...