Traxxas

Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, dual profile (2.2" outer, 3.0" inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD...

Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)Replacement part for these models:Ford Fiesta® ST RallyTelluride 4X4

Half shaft, external splined (steel-spline constant-velocity) (1) (fits 2WD Rustler/Stampede)Accessory part for these models:Bigfoot® No. 1Bigfoot® Officially Licensed ReplicaCraniac®Rustler...

Gear, 10-T pinion (32-p) (steel)/ set screw

Spacers (4)/ grip pads (3)/connector dust cover (1) (for TQi docking base) Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:SummitT-Maxx

Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

14-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

.

.

.

.

.

.

.

Gear, 34-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

.

.

.

.

Hold down, battery (for use with 30mm height and shorter battery packs)

Body, Rustler 4X4 VXL, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

17-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

Rebuild Kit-differential shaft/adjusting nut/rings(2)/balls(10/PTFE-coated bushing/thrust bearing/thrust washers (2)/spring washers (2)/fiber washers (4)

.

.

.

.

.

.

Replacement part for these models:Slash 4X4 UltimateUnlimited Desert RacerAccessory part for these models:E-Revo VXL BrushlessRustler 4X4 VXLTRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

Tires and wheels, assembled, glued (TRX-4 satin beadlock wheels, Canyon Trail 1.9 tires) (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

.

.

Beadlock rings, black (1.9") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, green (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, satin (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Body, GTS shock, long (silver aluminum) (1) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Shocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and...

Shocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and...

Springs, shock, long (natural finish) (GTS) (0.47 rate) (for use with TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Suspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Suspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4...

Suspension links, front lower, blue (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)

Tube chassis, inner panels, aluminum (blue-anodized) (front (2)/ wheel well (4)/ middle (4)/ rear (2))

Tires and wheels, assembled (Method 105 black chrome beadlock wheels, Canyon Trail 1.9" tires, foam inserts) (1 left, 1 right)

.

Pro-Scale Realism Flood the desert with brilliant white light with the new High Intensity LED Off-Road Light Kit for the Traxxas Unlimited Desert Racer.  Traxxas innovation delivers...

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

.

Beadlock rings, blue (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

Beadlock rings, green (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

.

.

.

Gear set, differential (spider gears (4), spider gear shaft (2)) 

Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTW

.

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

.

.

Push bar, bumper (chrome) (fits #8069 bumper) Accessory part for these models: TRX-4 Ford Bronco  

Linkage, sway bar, rear (2) (assembled with hollow balls)/ sway bar arm (left & right)

.

.

.

Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware

Tube chassis, inner panels (front (2)/ middle (4)/ rear (2)) Replacement part for these models: Unlimited Desert Racer

Spur gear, 62-tooth Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT ​

Driveshaft, center, aluminum (green-anodized) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT  

Mounts, suspension arms, aluminum (red-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended stub axle)

Tailgate panel insert (clear, requires painting)/ adhesive foam tape (2) Replacement part for these models: TRX-4 Ford Bronco

Tailgate panel/ tail light lens (2) (left & right)

Bumper, rear (chrome)/ bumper mount/ 3x10 BCS (2)  Replacement part for these models: TRX-4 Ford Bronco

Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw. Accessory part for these models: E-Revo VXL Brushless X-Maxx

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears) 12-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur...

11-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw  Accessory part for these models: E-Revo VXL Brushless X-Maxx.

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Replacement part for these models: E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo Rally VXL Revo Slash 4X4...

Ball bearings, black rubber sealed (10x15x4mm) (2) Replacement part for these models: Ford Fiesta® ST Rally Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 Stampede 4x4...

Hold downs, battery (blue-anodized) (2)/ adhesive foam battery pads/ shoulder screws (2)/battery hold-down posts (4)/ clips (4)

.

Body, GTR shock, 77mm, aluminum (blue-anodized) (rear, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 77mm, aluminum (red-anodized) (rear, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 77mm, silver aluminum (rear, no threads) Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 160mm, aluminum (red-anodized) (fully assembled w/o springs) (rear, no threads) (2) Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 139mm, aluminum (blue-anodized) (fully assembled w/o springs) (rear, threaded) (2) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (blue-anodized) (front, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (red-anodized) (front or rear, threaded) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, silver aluminum (front or rear, threaded) Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 134mm, aluminum (red-anodized) (fully assembled w/o springs) (front, threaded) (2) Replacement part for these models: Unlimited Desert Racer

Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

Nuts, 5mm flanged nylon locking (aluminum, green-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

.

.

Spur gear, 55-tooth Replacement part for these models: 4-Tec 2.0 VXL AWD Chassis

Toe links, steel (34mm) (2) Replacement part for these models: 4-Tec 2.0 VXL AWD Chassis Accessory part for these models: 4-Tec 2.0 AWD Chassis Ford GT® Ford Mustang GT