Traxxas

Skid plate, roof (body) (orange)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)Replacement front bumper and mount for 5894 2WD Slash LED light kit.Replacement part for these models:SlashAccessory part...

Portal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

WideMaxx® Suspension KitA Tougher, Wider StanceThe Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on...

Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally)Accessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4...

Center differential, complete (fits Hoss™ 4X4 VXL)Accessory part for these models:Hoss™ 4X4 VXL

47-tooth ring and 12-tooth pinion gears for rear differentialsReplacement part for these models:Rustler® 4X4Slash 4X4

Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

LED light harness, rear (requires #2477 wheelie bar mount)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler®Stampede®Accessory part for these models:Bandit®...

Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)Enhance steering precision, strength, and looks with Traxxas aluminum steering...

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)Replacement front bumper for Bandit and 2WD Rustler LED light kits.Replacement part for these...

Heat sink (fits #3351R and #3461 motors)The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on...

Gear set, metal (for 2085 & 2085X servos)Accessory part for these models:X-Maxx

Accessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton®SummitTRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped...

Servo, sub-micro, waterproofAccessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® TetonSummitTRX-4® 1979 Chevrolet BlazerTRX-4® 1979 Ford BroncoTRX-4® Equipped...

The Mini Maxx® LED front bumper incorporates a bright white LED light bar for forward illumination. This is a standard replacement for the LED front bumper used in the 10795 Mini Maxx LED Light Kit...

The Mini Maxx® LED roof skid features white lights in the front with red in the back to enhance rear visibility. This is a standard replacement for the roof skid used in the 10795 Mini Maxx LED Light...

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Replacement Mini Maxx® GTR shock springsReplacement part for these models:Mini Maxx®

The all-metal Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential features a 47-tooth, 32-pitch, steel...

The Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential includes a factory-installed 47-tooth,...

Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762...

Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762...

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Take your Mini Maxx® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish. Genuine Traxxas...

Add extra color to your Mini Maxx® with this heavy-duty roof skid plate and tailgate protector. Made from our toughest composite material, they protect your Mini Maxx's body during rollovers...

Give your 4-Tec® 2.0 extra style points with this underbody LED light kit. Perfect for track competitions or parking lot honing, the underbody LED light kit casts a colorful glow underneath the car...

Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

Take your Maxx® Slash® to the next level by replacing the stock front chassis brace with this heavy duty aluminum upgrade. Made from tough 6061-T6 aluminum and brilliantly anodized in high-impact...

Is it time to upgrade your Maxx® Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled...

Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to eliminate play. The...

Replica Raptor R™ hood vent clipless body mount and latches with 3x8 mm screws (5) (fits 10111-series bodies)Replacement part for these models:Ford® F-150® Raptor R™ 4X4

Body, Slash® 4X4, red (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting)Older Slash chassis without clipless mounts will require 6940 (Slash 2WD) or...

Body, Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash 4X4 body comes fully trimmed and ready to paint with decal sheet...

Body, Sledge®, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, X-Maxx® Ultimate, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix X-Maxx body comes fully trimmed and ready to paint with decal sheet...

Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

Body, X-Maxx® Ultimate, blue (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts will...

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts...

Body, Slash® 2WD, ProGraphix® (also fits Slash® VXL & Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash body comes fully trimmed...

Painted, Decals Applied Green/Blue Body w/ Wing for Bandit & Bandit VXL

Painted, Decals Applied Orange/Blue Body w/ Wing for Bandit & Bandit VXL

Body, Bandit®, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Bandit body comes fully trimmed and ready to paint with decal sheet,...

Painted, Decals Applied Blue Body w/ Wing for Bandit VXL

Body, Bandit® VXL, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Bandit body comes fully trimmed and ready to paint with decal...

Body, Ford Mustang, complete (green) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, Ford Mustang, complete (copper) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, Ford Mustang, complete (blue) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, TRX-4® Sport, complete, red (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)

Body, TRX-4® Sport, complete, blue (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)

Body, XRT®, Rock n' Roll (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix XRT body comes fully trimmed and ready to paint with decal sheet and...

Body, XRT® Ultimate, blue (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, black (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, orange (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, red (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, blue (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, Slash® 4X4, ProGraphix® (also fits Slash® VXL & Slash® 2WD) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash 4X4 body comes fully...

Body, Slash® 4X4, ProGraphix® (also fits Slash® VXL & Slash® 2WD) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash 4X4 body comes fully...

Body, Slash® 2WD, ProGraphix® (also fits Slash® VXL & Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash body comes fully trimmed...

The Mini Maxx® slipper clutch comes completely assembled and ready to install in your truck with an included 47-tooth spur gear. When installing the slipper clutch, you must replace the standard...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...

Mini Maxx® steel constant velocity shafts offer the ultimate in torque handling and efficient power transfer for high-power brushless applications. On the axle side, snap rings secure the drive pins...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry.Accessory part for these models:Maxx®...

Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these...

Traxxas aluminum caster blocks (C-hubs) take an already proven design and ratchet up the toughness and durability with 6061-T6 aluminum. The hubs are carefully machined from a block of aluminum to...

Traxxas aluminum caster blocks (C-hubs) take an already proven design and ratchet up the toughness and durability with 6061-T6 aluminum. The hubs are carefully machined from a block of aluminum to...

Add convenient remote-shifting capability to your TRX-4M high/low two-speed transmission with this shifting servo. The servo replaces the manual shifting lever on the transmission and plugs into...

Foam inserts, 3.0" (soft) (2)1.2″ inner diameter soft foam inserts fit on TRX-4MT™ monster truck wheels to change the climbing and handling characteristics of your TRX-4MT 3.1″ Terra Groove tires and...

Is it time to replace your Jato 4X4 body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the...

Lower the drag on your Jato 4X4 for race day with the low-profile race wing. Includes wing washer with 4 x 12 mm screws (2).Accessory part for these models:Jato® 4X4 VXL

Lower the drag on your Jato 4X4 for race day with the low-profile race wing. Includes wing washer with 4 x 12 mm screws (2).Accessory part for these models:Jato® 4X4 VXL

Lower the drag on your Jato 4X4 for race day with the low-profile race wing. Includes wing washer with 4 x 12 mm screws (2).Accessory part for these models:Jato® 4X4 VXL

Replacement differential carrier includes ring gear spacer and O-rings (2)Replacement part for these models:Mini Maxx®

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Large 4″ Sledgehammer rear tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a heavy-duty...

Large 4″ Sledgehammer rear tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a heavy-duty...

The 47-tooth center differential spur gear (32-pitch) must be used with optional center differentials 10760 or 10760R. Traxxas spur gears let you fine-tune the performance of your Traxxas model...

The 47-tooth spur gear (32-pitch) is made from steel for maximum power handling and durability and fits directly onto the Mini Maxx center driveshaft. Traxxas spur gears let you fine-tune the...

The 47-tooth spur gear (32-pitch) fits directly onto the Mini Maxx® center driveshaft. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help...

Replacement Mini Maxx® Extreme HD outer stub axle assembly comes assembled and ready to install. Fits front or rear, left or right.Replacement part for these models:Mini Maxx®

Replacement Mini Maxx® Extreme HD output yoke comes assembled and ready to install. Includes screw pin. Fits front or rear, left or right.Replacement part for these models:Mini Maxx®

Replacement left and right , rear stub axle carriers : Mini Maxx® Replacement part for these models:Mini Maxx®

Replacement left and right , rear stub axle carriers : Mini Maxx® Replacement part for these models:Mini Maxx®

Replacement left and right , rear stub axle carriers : Mini Maxx® Replacement part for these models:Mini Maxx®

Replacement left and right , rear stub axle carriers : Mini Maxx® Replacement part for these models:Mini Maxx®

Replacement left and right , rear stub axle carriers : Mini Maxx® Replacement part for these models:Mini Maxx®

Replacement left and right , rear stub axle carriers : Mini Maxx® Replacement part for these models:Mini Maxx®

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...