Traxxas

FEATURES: Nylon construction          Black in color          Fits left or rightINCLUDES: One Fully Assembled...

This is the optional 50T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES Nylon construction Black in color ...

FEATURES: Nylon construction          Black in colorINCLUDES: Upper and Lower Steering Arm          Steering...

FEATURES: Aluminum construction          Anodized red in colorINCLUDES: Four Toe Links          Eight Hollow...

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Skidplate          One Rear...

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Bumper          One Rear Bumper

FEATURES: Nylon constructionBlack in colorINCLUDES: Left Front & Rear Axle CarrierRight Front & Rear Axle Carrier

FEATURES: Hard anodized aluminum          Replaces stock plastic pivot ball capsINCLUDES: Eight Pivot Ball...

FEATURES: Steel constructed pivot balls          Black nylon pivot ball capsINCLUDES: Four Pivot...

FEATURES: Nylon construction          Black in colorINCLUDES: One Lower Right Suspension Arm          One...

FEATURES: Nylon construction          Black in colorINCLUDES: One Upper Right Suspension Arm          One...

FEATURES: Nylon construction          Black in colorINCLUDES: Two front bulkhead halves          Four 3x10mm...

FEATURES: Nylon construction, black in colorINCLUDES: Two Rear Bulkhead Sections          Four 3 x 10mm Button Head...

FEATURES: Steel construction          Silver in colorINCLUDES: Twenty Two Hollow BallsSPECS:    Length: 5mm (0...

FEATURES: Nylon construction          Black in colorINCLUDES: Twenty Hollow BallsREQUIRES: Installation on the vehicleSPECS:    Outer...

FEATURES: Nylon construction          Black in colorINCLUDES: One Battery Compartment Door          Two Vents

FEATURES: Plastic construction          Allows installation and removal of the receiver without losing...

FEATURES: Nylon construction          Grey in colorINCLUDES: One Chassis

FEATURES: Steel construction          Silver in colorINCLUDES: Two 2x46mm Pins          Four 2x14mm Pins

FEATURES: Ball bearings          Blue rubber sealedINCLUDES: Two Ball BearingsREQUIRES: Installation on the vehicleSPECS:    Outer...

FEATURES: Leads and bullet connectors preinstalled          Stock replacement brushed reverse rotation motor INCLUDES: Reverse Rotation Titan 550...

Fits Continued: 1/10 Maximum Destruction / Grave Digger 30th / Monster Mutt / Ford Raptor / Rally VXL / Slash R.G.D. / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Steel...

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon ConstructionINCLUDES: One Spur GearREQUIRES: the #6814 center differential

The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon powered Rustler VXL and Stampede VXL. The package includes hardware to raise the...

FEATURES: Brushless control          11.1V 3S LiPo battery capability          Low voltage...

This is an optional Traxxas Aluminum Heat Sink, and is intended for use with Traxxas 1/16 VXL vehicles equipped with a Velineon 380 brushless motor FEATURES: Aluminum construction, anodized blue in...

FEATURES: Ultra high-temp sintered neodymium          Traxxas 3.5mm bullet connectors          16-gauge Maxx...

FEATURES: Stock replacement receiver for the Latrax Rally Car INCLUDES: 3-channel 2.4GHz Micro Receiver

This is the Traxxas XL 2.5 Electronic Speed Control, with Low Voltage Detection. Designed and engineered by Traxxas, the XL-2.5 Brushed Electronic Speed Control provides smooth throttle control with...

This is the Traxxas EVX-2 Electronic Speed Control with Reverse. FEATURES For 16 volt dual battery, dual motor setups Three programmable drive...

This is the Traxxas XL-5 Waterproof Forward/Reverse Electronic Speed Control. FEATURES EZ-Set pushbutton setup Efficient low loss...

 This is the Traxxas Power Cell 4S 14.8V 6700mAh LiPo Battery with the iD Connector.FEATURESSized for the Traxxas X-Maxx monster truckHard-wired 12-gauge Maxx Cable soldered to cellsiD Auto...

This is the Traxxas Power Cell 11.1V 6400mAh 25C 3S LiPo Battery. Battery expansion kits are required in some models due to the size of this battery: Rustler VXL Part# (TRA3725X) Bandit VXL Part#...

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Rally VXL / Slash R.G.D / Nitro Jato 3.3 / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Durable metal...

Fits Continued: 1/10 Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Hardened steel construction.          Hexagon socket drive...

Fits Continued: 1/10 Nitro 4-Tec / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Black steel construction with hex headINCLUDES: Six screws

FEATURES: Nylon construction          Grey in colorINCLUDES: One Output Gear          One Top Reduction...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas.FEATURES: Machined aluminum construction          Anodized blue in...

Fits Continued: 1/10 Nitro Sport / Nitro Rustler FEATURES: Nylon construction Black in color INCLUDES: One front body mount One rear body mount Two 38mm body posts Two 26mm body posts Installation...

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Aluminum...

Spinning carousel rackAccessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton4-Tec® 2.0 AWD...

FEATURES: Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 engines          Suited for the varied throttle range of off-road...

Gear set (for 2080A micro waterproof servo)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit

Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash...

Oil, shock (70 wt, 900 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

Oil, shock (60 wt, 700 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

Oil, shock (40 wt, 500 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

Oil, shock (30 wt, 350 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

Oil, shock (20 wt, 200 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

Body support, rear/ 3x15mm CS (2) / 3x15mm flat-head machine (2) (fits X-Maxx®)Replacement part for these models:X-Maxx®

.

.

.

.

.

Servo case, aluminum (blue-anodized) (middle) (for 2250 servo)Accessory part for these models:Bandit VXLBanditE-Maxx BrushlessE-MaxxE-Revo BrushlessE-Revo VXL BrushlessE-RevoFord F-150 RaptorFord...

.

Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Traxxas 8369 Tires Response 1.9 Touring (Front) (2)/ Foam Inserts (2) Brand new item, sealed in original retail packaging. Tires, Response 1.9' Touring (front) (2)/ foam inserts (2)

.

FEATURES: Aluminum construction Silver in color INCLUDES: One Metal Brake Cam REQUIRES: Assembly onto Vehicle

Ball bearings, black rubber sealed (4x10x4mm) (2)

Ball bearings, black rubber sealed (15x21x4mm) (2)

Fits Continued: 1/10 Ford Raptor / Slash R.G.D. / Revo / T-Maxx FEATURES: 4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't needed...

FEATURES: Stainless Steel Construction Silver in Color INCLUDES: Two Bearings REQUIRES: Installation SPECS: 10x15x4mm COMMENTS: The Factory Number is 4612. Per Package.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

.

FEATURES: Metal construction Black in color INCLUDES: Six 2.5 x 5mm button-head hex screws REQUIRES: Installation on the vehicle

FEATURES: Nylon construction           Black in color INCLUDES: One Spur Gear

These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES: Plastic construction, blue in colorFor use with the Low CG chassisFastens to sides of chassis to absorb...

6-Piece Metric Nut Driver Master Set DetailMaximum DurabilityTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The...

Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)Accessory part for these models:X-Maxx

Use the TRX 3.3/2.5 recoil pull starter for racing applications where weight savings are critical. It’s all new and engineered for long-lasting, trouble-free operation. It includes a heavy-duty...

The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are...

This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1 hour of run time. Heavy-duty wiring provides efficient current...

Charger, AC, 500 mAh (7 cell, NiMH) (US only)Accessory part for these models:Ford Fiesta® ST RallySlash 4X4

FEATURES: Steel and nylon constructionINCLUDES: One Complete Differential Assembly

FEATURES: Aluminum construction          Anodized red in colorINCLUDES: Four Pushrods          Eight Hollow...

This is a Complete Control Box for the Easy Start 2This houses the 7.2V battery for the Easy Start, and provides the start button.FEATURES: Black plastic construction...

Upgrade Your Traxxas Model with theTQi Telemetry Expander 2.0!TQi Telemetry Expander (#6550) Contents (Three-Quarter View)Requires the TQi radio system with the Traxxas Link Wireless Module(#6511),...

.

FEATURES: Steel constant velocity driveshaft for 1/16 Slash INCLUDES: One steel driveshaft REQUIRES: Installation on vehicle SPECS:    Length: 1.9" (48mm) shaft...

Shoulder Screws, 4x25mm cap-head machine (6) (with 5mm shoulder for Monster Buggy)

.

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Spoke Wheels in...

FEATURES Steel construction, black in colorFits front and rear stock or optional shocks   INCLUDES Two Shock Springs   SPECIFICATIONS Length: 1.8"...

FEATURES: Gray plastic construction INCLUDES: Two mounts REQUIRES: Mounting SPECS: Length: 1-1/2" (38mm) Width: 3/8" (9mm) Height: 3/8" (9mm)

Description: Traxxas Carriers, Stub Axle (Left & Right) - TRA8352 This item package consists of the following Traxxas items. Carriers, stub axle (left & right)   For FORD GT

FEATURES: Steel construction          Constant velocityINCLUDES: Four Driveshafts

.

.

FEATURES: Nylon construction Black in color INCLUDES: One Rear Bumper and bumper mount  

FEATURES: Steel construction, red in color 4.9 damping rate with double yellow stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUIRES: Installation on shock assembly SPECS:...

FEATURES: Nylon construction Black in color INCLUDES: One Nylon Steering Drag Link Two 3mm Shoulder Screws REQUIRES: Assembly onto Vehicle

FEATURES: Black steel construction Hexagon socket drive insert High round cap head screws INCLUDES: (6) Screws SPECS: Length: 23mm Diameter: 3mm

FEATURES: Steel construction          Cap head with hexagon socket drive insert          Metal lock...

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler...

FEATURES: Replaces damaged or worn spur gear assemblies Constructed of plastic INCLUDES: One spur gear assembly REQUIRES: Diassembly of gearbox and installing spur gear onto primary gear shaft (4993)