Traxxas

FEATURES: Replaces damaged pivot ball aluminum caps. Constructed of aluminum. INCLUDES: Four pivot ball aluminum caps for the Traxxas T-Maxx. REQUIRES: Threading two caps into each axle carrier...

This is an optional Traxxas Telemetry Trigger Magnet Holder and Spur Gear Magnet. This component installs onto the spur gear and holds a magnet that is detected by the RPM sensor (TRA6520, TRA6522)...

(for use with remote push button)

.

.

FEATURES: Nylon Construction           Black in Color   INCLUDES: Three Spur Gears

.

FEATURES: Plastic construction, white in color INCLUDES: Two Dish Front Wheels in White REQUIRES: Tires Tire Glue SPECS: Diameter: 3.4" (87mm) Width: 1.7" (43.4mm) Hex Size: 17mm

FEATURES: Constructed of hardened steel INCLUDES: Differential Output Gear for the Traxxas Revo 3.3 REQUIRES: Installing in front or rear of center differential COMMENTS: WIll not work with Rear...

FEATURES: Rubber construction Blue in color Flexible material INCLUDES: Two Blue rubber Shock Boots and Two black Plastic Shock Caps. REQUIRES: Nothing SPECS: Length: 1 3-8" (35mm) Diameter: 1/2"...

This is a pair of Assembled Traxxas SCT Tires and 5-Spoke Wheels. FEATURES Fits the front of 2WD short course trucks Split-spoke beadlock style...

FEATURES: Standard bearings. INCLUDES: Eight 5mm x 8mm Bearings REQUIRES: Assembly into the model. SPECS: Height: 2.5mm Inner Diameter: 5mm Outer Diameter: 8mm

FEATURES: Aluminum Construction Anodized Red INCLUDES: (2) Assembled Turnbuckles REQUIRES: Installation onto Stampede 5mm Wrench SPECS: Length: 2.4" (61mm)

FEATURES: Nylon construction INCLUDES: Gear, two ring seals, gasket and instruction sheet REQUIRES: Installing in diff case according to instructions on sheet COMMENTS: Fits only the optional Revo...

.

FEATURES: Steel construction, gun metal in color Replaces a worn or damaged idler gear INCLUDES: One 13 Tooth Idler Gear (first speed gear) REQUIRES: Installation

Includes: LED lights, chassis harness (4 clear lights, 2 red lights) (1)/wire tie (3) Requires: power supply #7286

FEATURES: Plastic construction Black in color INCLUDES: One Rear Bumper. REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction           Black in color INCLUDES: Three Spur Gears

.

FEATURES: Steel construction Round head with phillips drive insert INCLUDES: Six screws SPECS: 3mm thread size 20mm long

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Aluminum construction Gunmetal colored INCLUDES: One Big Bore XXL Shock Body...

.

FEATURES: Metal construction White in color Damper rating 1.3 INCLUDES: Two Super Shock Springs Gold 1.3 REQUIRES: Assembly onto Vehicle

.

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit. The...

FEATURES: Gray plastic construction "Long Travel" raised lettering on top of the rocker arms INCLUDES: (8) rocker arms, Part #5356 REQUIRES: Installation on the Traxxas Revo SPECS: Length: 2" (52mm)...

FEATURES: Metal construction INCLUDES: (12) Washers SPECS: Size: 3x6mm

These are the 4x15mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction   ...

Includes: 2- 26mm Hard chrome suspension ("hinge") pins. 4- 3mm E-rings.

This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

.

FEATURES: 0.12" (3mm) thick 6061 aluminum, dark titanium in color INCLUDES: XO-1 Chassis  

FEATURES: Replaces stock output shafts, constructed of steel. Spacer is made of plastic. INCLUDES: One output shaft and spacer REQUIRES: Installing shaft in gearbox between the clutch bell and output...

FEATURES: Black nylon construction INCLUDES: One upper rear and one lower right rear suspension arm REQUIRES: Removing stock suspension arms Adjusting camber and toe after installing Adjustable...

FEATURES: Aluminum construction, anodized blue in color INCLUDES: Motor Mount with Instruction Sheet

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler Package includes: 2ea aluminum shock caps Specs: diameter- 14mm height- 17mm

.

FEATURES: Made of stainless steel This is used to hold the front steering block (TRAC9036 #3636) to the castor block (TRAC9032 #3632) on the electric (not Nitro) Rustler Also called the vertical...

This is the Replacement Battery Door for the 2.4GHz Transmitter for the LaTrax Alias Quad-Copter Includes: 1 x Battery Door

FEATURES: Aluminum Construction, hard anodized coated Threaded for Easy Adjustment INCLUDES: One hard anodized Threaded Aluminum GTR Shock Body REQUIRES: Assembly onto Vehicle Parts to Complete Shock...

Split-Spoke 3.8" wheels for Revo & Maxx trucks add another dimension of style and performance. Available in black-chrome, mirror-chrome and satin finish, Traxxas Split-Spoke wheels...

EATURES: Cast aluminum construction INCLUDES: One manifold REQUIRES: Nothing. This is a direct replacement part. SPECS: Outlet inner diameter: 11mm (0.43") Engine side inner diameter: 13mm (0.51")

Damper balls, anti-vibration, gimbal (4) (yellow dot)/ camera mount (4) for Traxxas Aton

.

This is the Servo Case and Gaskets for the Steering Servo used on the Traxxas X-Maxx Monster Truck     FEATURES Replaces damaged case...

FEATURES: Steel construction   INCLUDES: Three Pinion Gear with set screw

.

FEATURES Molded plastic composite construction   INCLUDES Left and Right Stub Axle Carriers

 

FEATURES: Blue and Grey in Color Rubber and Nylon Construction INCLUDES: Two Rubber Diaphragms Four Shock Pistons Two Shock Ends Two Ball Ends Two Rubber O-Rings REQUIRES: Installation into Shocks.

Fits Continued: 1/10 4-Tec  / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic   Includes: 4 short rod ends (17mm) 16 long rod ends (19mm) 2 ball...

.

FEATURES: Molded plastic construction INCLUDES: Center Bearing Carrier

.

FEATURES: Aluminum construction          Blue in colorINCLUDES: One Front Bulkhead Tie Bar          One Rear...

.

Fits Continued: 1/10 Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Molded Composite Gray in Color INCLUDES: (2) Bodies REQUIRES: Installation SPECS: Length: 1.777" (45.1mm)...

  This is the Center Gear Box (Transmisssion) (Front & Rear halves) for the REVO from Traxxas.   FEATURES Durable black nylon construction   INCLUDES One center gear...

FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm One right suspension arm REQUIRES: screw pins for installing SPECS: Length: 3-5/8"

.

.

FEATURES: Silver metal construction Round head machine screws Phillips drive INCLUDES: Six Screws. SPECS: Length: 8mm Diameter: 2.6mm

FEATURES: Steel construction Rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 27mm (1.06") Inner Diameter: 20mm (0.79") Width: 4mm (0.16")

FEATURES: Steel construction, silver in color Used on the Traxxas Revo monster truck, can also be used in any application where a 2x6mm roundhead self tapping screw is required INCLUDES: Six 2x6mm...

.

 

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

Fits Continued: 1/10 Ford Raptor / Rally VXL / Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Black nylon rod ends Steel...

FEATURES: Black Steel springs INCLUDES: Two Springs REQUIRES: Installing on Traxxas Street Sport Shocks SPECS: Length: 25.4 mm (1") Diameter: 18.6 mm (0.731")

.

.

FEATURES: Nylon Construction Black in Color INCLUDES: One Left Rear Suspension Arm One Right Rear Suspension Arm REQUIRES: Assembly onto Vehicle

FEATURES: Plastic construction Gray in color Progressive 1, Low Rate INCLUDES: One Left/Front Upper Rocker Arm One Left/Front Lower Rocker Arm One Right/Front Upper Rocker Arm One Right/Front Lower...

FEATURES: Black Plastic Construction INCLUDES: Two Wedges REQUIRES: Traxxas 4-TEC SPECS: Length: 20mm (.787") Width: 7mm (.275") COMMENTS: None

.

.

.

These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction Secures...

.

FEATURES: Nylon and steel construction INCLUDES: 2 Rod ends 2 Ball studs 2 Hollow balls REQUIRES: Installation on front suspension

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against...

FEATURES: Replaces worn bearings Constructed of steel INCLUDES: Two 6x12x4mm Ball Bearings for the Traxxas T-Maxx Monster Truck REQUIRES: Installing two bearings in each axle carrier (4932) and two...

This is the Main Diff with Steel Ring Gear from Traxxas for the Bandit, Stampede and Rustler VXL series. Includes: Main diff with steel ring gear Side cover plate Screws Instructions Requires:...

FEATURES Hardened steel construction   INCLUDES Pinion Gear for the Front Differential

FEATURES: Nylon construction Black in color INCLUDES: One Left and Right 25° Caster Blocks One Left and Right 25° Steering Blocks REQUIRES: Assembly onto Vehicle

.

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Aluminum...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Steel construction Nylon locking insert Silver in color INCLUDES: Twelve 2.5mm nuts REQUIRES: 5mm open-end or four-way wrench for assembly. SPECS: Nut Hex size: 5mm (.20") Internal thread...

This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of changes, and preventing overheating. The...

This is a tube of white lithium grease from Traxxas. This is used to lubricate gears and differential components.

FEATURES: 1.4 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 51mm (2") Diameter: 21mm (0.83")

FEATURES: Thicker steel construction. INCLUDES: Two turnbuckles with pre-installed rod ends and balls. REQUIRES: Nothing. These are direct replacement rods. SPECS: Length: 118mm (4.65") Thickness:...

#5339 Insert, threaded steel (replacement inserts for TUBES) (includes (1) left and (1) right threaded insert) Insert, threaded steel (replacement inserts for TUBES) (includes (1) left and (1) right...

FEATURES: Red in color (small gold square indicates spring type) Metal construction INCLUDES: 2 springs SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16" (17mm) Outside diameter: 7/8" (22mm)...

FEATURES: Replaces damaged or worn clutch bells Constructed of steel INCLUDES: One Forward and Reverse Clutch Bell for the Traxxas T-Maxx REQUIRES: Diassembly of transmission and installing on output...

.