Traxxas

FEATURES: Durable steel construction Silver in color INCLUDES: Four 51.5mm pins Four 30mm pins

This unique C-Hub design is already Traxxas Tough; this artfully machined aluminum version is stronger still, and preserves the carefully engineered steering and suspension geometry for track-ready...

This unique C-Hub design is already Traxxas Tough; this artfully machined aluminum version is stronger still, and preserves the carefully engineered steering and suspension geometry for track-ready...

Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & rightAccessory part for these models:Ford Fiesta® ST RallySlash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

FEATURES: Hardened plastic construction Black in color INCLUDES: One left caster block One right caster block REQUIRES: Installation on Slash SPECS: Length: 49mm (1.93") Width: 29.5mm (1.16")

FEATURES: Hardened plastic construction Black in color INCLUDES: One rear bulkhead

FEATURES: Black plastic construction INCLUDES: 2 Ouput yokes 2 screw pins REQUIRES: Installation on vehicle

FEATURES: Aluminum construction, red in color INCLUDES: Two Front and Rear Bulkhead Tie Bars

FEATURES: Aluminum construction Anodized blue in color INCLUDES: Two bulkhead tie bars (front and rear)

FEATURES: Nylon construction Gray in color INCLUDES: One Chassis REQUIRES: Installation of car components SPECS: Length: 310mm (12.2") Width: 180mm (7.1") Thickness: 2.5mm (0.10")

Expand your competitive edge! The optional Center Differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed...

FEATURES: Four clear LED lights in chrome finish plastic housings INCLUDES: Four Lights with Housings, Wiring, Mounting Hardware and Instructions SPECS: Housing Diameter: 0.68" (17.3mm)

Tires and wheels, assembled, glued 2.8" (All-Star chrome wheels, Maxx® tires, foam inserts) (2)Replacement part for these models:Stampede 4X4Accessory part for these models:Rustler 4X4Bigfoot® No. 1...

FEATURES: Constant velocity steel splined construction INCLUDES: Two Diff Output Shafts

FEATURES: Rebuilds front and rear driveshafts INCLUDES: Tube of Grease, six Silicone Seals and ten Pins COMMENTS: Does not include half shafts

Driveshaft, center, 6061-T6 aluminum (green-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

FEATURES: 6061-T6 Aluminum construction Anodized blue in color INCLUDES: One aluminum center drive shaft REQUIRES: Installation on to vehicle SPECS: Length: 165.1mm (6.5") Outer Diameter: 8.5mm (0...

FEATURES: Made of steel INCLUDES: One stub axle SPECS: Length: 36.5mm (23/16") Diameter: 11.7mm (15/32") Threaded part of shaft, length: 9.4mm (3/8") diameter: 3.9mm (5/32")

FEATURES: Made of steel INCLUDES: One stub axle SPECS: Length: 38mm Diameter, bell end: 12mm (1/2") shaft: 5.0mm (3/16") threads: 3.9mm (5/32") Length of thread: 9.3mm (3/8")

FEATURES: Hardened steel construction INCLUDES: Internal Splined Half Shaft

FEATURES: Polished steel construction Externally splined INCLUDES: One Constant Velocity Half Shaft

FEATURES: Constructed of clear plastic INCLUDES: One rear shaft cover REQUIRES: Installation

.

FEATURES: Black plastic construction INCLUDES: Rear suspension arm guards (2) Guard spacers(2) Hallow Balls (2) 3x16mm BCS (2) REQUIRES: Installation on vehicle

FEATURES: Composite plastic construction Black in color INCLUDES: Two front suspension arm guards Two guard spacers Two hollow balls Eight 3x16mm button head cap screws REQUIRES: Installation onto...

FEATURES: Composite construction Allows installation of taller multi-cell batteries INCLUDES: Battery Hold Down with metal Post and Body Clip REQUIRES: Fastening to chassis

FEATURES: Composite construction Holds stock 7-cell battery supplied with vehicle INCLUDES: Two battery Hold Down sections with metal Post and Body Clip REQUIRES: Fastening to chassis COMMENTS: Also...

.

This is the USB Charger for the LaTrax Alias Quad-Copter Includes: 1 x High Output USB Charger

 

Requires Traxxas OBA system (not included or sold separately). 

.

Telemetry expander mount fits XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4. (*requires rear chassis brace #5632)

.

Upgrade Your Traxxas Model with theTQi Telemetry Expander 2.0and GPS Module 2.0!TQi Telemetry Expander 2.0 (#6550X) Contents (Three-Quarter View)Requires the TQi radio system with Wireless Module...

Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM. This system works well for hard surfaces, but wheelspin on loose surfaces causes...

EATURES: Plastic magnet holderINCLUDES: Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

Phone mount, transmitter (fits TQi and Aton transmitters) The Transmitter Phone Mount provides a secure mounting base for your mobile device on TQi and Aton transmitters. Phone mount, transmitter...

.

This is the Traxxas Auto-Detectable Voltage Sensor. FEATURES Only for use with the Traxxas #6550 Telemetry Expander ...

INCLUDES: TQ 2.4GHz 3-Channel Micro Receiver SPECS: Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm) Weight: 0.35oz (10g)

FEATURES: Steel construction Two different thickness for different surfaces and steering action Silver colored sway bars are thin for rough surfaces with low traction and to reduce understeer Black...

This is the stock 18 Tooth Pinion Gear for the Traxxas X-Maxx. FEATURES Hardened steel construction Compatible with steel spur...

FEATURES: 118+mph speed rated belted slicks with foam inserts Dished design black plastic wheels INCLUDES: Two Front Slicks with Foam Inserts and two Wheels SPECS: Outer Diameter: 4.29" (109mm)...

FEATURES: 118+mph speed rated belted slicks with foam inserts INCLUDES: Two Rear Slicks with Foam Inserts REQUIRES: Rear Wheels SPECS: Outer Diameter: 4.29" (109mm) Width: 2" (51mm)

FEATURES: Constructed of 6061-T6 aluminum, anodized blue in color INCLUDES: Four 17mm Splined Wheel Hubs Four Screw Pins

FEATURES: Steel construction INCLUDES: One input shaft One pin COMMENTS: This part is for the innovative new Traxxas cush drive output that cushions the gear drive system and protects critical...

FEATURES: Metal and elastomer construction INCLUDES: One drive pin One drive key One drive damper COMMENTS: This part is for the innovative new Traxxas cush drive output that cushions the gear drive...

FEATURES: Metal construction, blue colored INCLUDES: One motor adapter

FEATURES: Constructed of 6061-T extruded aluminum, anodized blue in color INCLUDES: Center Driveshaft for the Traxxas XO-1

FEATURES: Constructed of 6061-T6 aluminum, anodized blue in color INCLUDES: Two Rear Axle Carriers

FEATURES: Hardened steel construction 6mm diameter at axle pin area INCLUDES: Two 6mm Front Stub Axles

FEATURES: Hardened steel construction 6mm diameter at axle pin area INCLUDES: Two 6mm Rear Stub Axles

FEATURES: Hardened steel construction Steel spline, constant-velocity design INCLUDES: Rear Driveshaft for the Traxxas XO-1

Tooth: 54T Pitch: 1.0 Metric Pitch

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1 On-Road Car

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1 On-Road Car  

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 46T Spur Gear for the Traxxas XO-1 On-Road Car

FEATURES: Molded plastic construction INCLUDES: Bellcrank Brace and Draglink for the Traxxas XO-1

FEATURES: Hardened steel suspension pins Plastic tie bar bushings INCLUDES: Two Front and two Rear Suspension Pins Two Tie Bar Bushings

FEATURES: Constructed of 7075-T6 aluminum, anodized blue in color INCLUDES: Front Shock Tower

FEATURES: 6061-T6 aluminum construction, anodized blue in color INCLUDES: One each Left and Right Steering Blocks REQUIRES: Four 10x15mm Ball Bearings, (2) Four 6x12mm Ball Bearings, (2) 

FEATURES: Dense foam absorbs minor impacts INCLUDES: Foam Front Bumper for the Traxxas XO-1 SPECS: Width: 10.1" (258mm) Thickness: 0.98" (25mm)

FEATURES: Molded plastic construction INCLUDES: Rear Diffuser

FEATURES: Constructed of plastic INCLUDES: Splitter Extension Left and Right Canards Four 4x12mm Countersink Screws Two 3x10mm Countersunk Screws

FEATURES: Molded plastic construction INCLUDES: Splitter Extension with two 3x10mm Countersunk Screws

FEATURES: Made of a black composite material INCLUDES: One splitter mount

FEATURES: Molded plastic construction Holds rear suspension arm hinge pins in place INCLUDES: Rear Bulkhead for the Traxxas XO-1

FEATURES: Molded plastic construction INCLUDES: Two Battery Cup Sections

FEATURES: Molded plastic construction INCLUDES: Two Battery Hold Down Retainers

FEATURES: Molded plastic construction Taller to allow the use of thicker multi-cell batteries INCLUDES: Two optional Tall Battery Hold Downs

FEATURES: Molded plastic construction INCLUDES: Two Battery Hold Downs

FEATURES: Plastic construction with one-piece silicone seal INCLUDES: All Receiver Box Compoments with Foam Mounting Pads, tube of Silicone Grease and Instructions

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Chassis Brace

FEATURES: Molded plastic construction INCLUDES: Left and Right Tunnels and Vent Cover with one 3x8mm Countersunk Screw

FEATURES: Molded plastic construction INCLUDES: Left and Right Tunnel Extensions

FEATURES: Molded plastic construction INCLUDES: One each Front and Rear Body Mount

FEATURES: Flexible exocarbon construction INCLUDES: Wing Four Plastic Mount Sections SPECS: Width: 11" (275mm) Height: 0.55" (14mm)

FEATURES: Constructed of molded plastic, black in color INCLUDES: Rear Wing with two Mounts and two Washers

.

FEATURES: Mounted Kumho tires with foams on split spoke satin chrome, black beadlock style wheels in plastic INCLUDES: Two mounted Kumho tires with foams Two Split Spoke Satin Chrome, black Beadlock...

FEATURES: 2.3 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 49mm (1.9") Diameter: 22mm (0.87")

FEATURES: Assembled turnbuckles with captured rod ends Steel construction with composite plastic rod ends INCLUDES: Two 72mm turnbuckles with rod ends REQUIRES: Installation onthe vehicle

.

FEATURES: Steel construction Nylon rod ends INCLUDES: Two Assembled Rod Ends REQUIRES: Use with Progressive-2 Rockers SPECS: Length: 91mm (2.58") Diameter: 5mm (0.20")

This is a pair of Assembled Traxxas SCT Tires and Split Spoke Wheels S1 Compound. FEATURES Split-spoke beadlock style wheels, black spokes and satin...

This is a pair of Assembled Traxxas SCT Tires and Split Spoke Wheels. FEATURES Fits the rear of 2WD short course trucks and the front and rear...

FEATURES: Split spoke black plastic wheel with blue beadlock look rims INCLUDES: Two Short Course Split Spoke Wheels SPECS: Outer Diameter: 2.2" (56mm) Inner Diameter: 3.0" (76mm) Width: 1.6" (41...

FEATURES: Split spoke black plastic wheel with blue beadlock look rims BF Goodrich Mud Terrain TA KM2 tires Fits the front of 2WD SC trucks INCLUDES: Two Short Course Tire and Wheels with Foam...

FEATURES: Fits two wheel drive 1/10 scale Traxxas Slash Off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) Black spoke wheels with beadlock look in satin...

FEATURES: Split spoke black plastic wheel with blue beadlock look rims INCLUDES: Two Short Course Split Spoke Wheels SPECS: Outer Diameter: 2.2" (56mm) Inner Diameter: 3.0" (76mm) Width: 1.6" (41...

FEATURES: Split spoke black plastic wheel with blue beadlock look rims BF Goodrich Mud Terrain TA KM2 tires Fits front and rear of 4WD SC trucks and rear of 2WD SC trucks INCLUDES: Two Short Course...

FEATURES: Fits front and rear of 4WD, and rear of 2WD short course trucks Off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) Black spoke wheels with beadlock...

FEATURES: Split spoke satin chrome, black beadlock style wheels Kuhmo style tires with foam inserts 2WD front application INCLUDES: Two Kuhmo Tires pre-mounted on SCT Wheels REQUIRES: Installation on...

Tires & wheels, assembled, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)

FEATURES: Satin chrome, black beadlock style wheels Kuhmo style tires with foam inserts 2WD rear, 4WD front/rear INCLUDES: Two Kuhmo Tires pre-mounted on SCT Wheels REQUIRES: Installation on...

FEATURES: Mounted BG Goodrich tires with foams on Satin chrome, black beadlock style wheels in plastic INCLUDES: Two mounted BF Goodrich Mud Terrain T/A KM2 tires with foams Two Satin Chrome, Black...

FEATURES: Fits front of the 2 wheel drive 1/10 scale Traxxas Slash Red colored dual profile beadlock style wheel with chrome finish spokes S1 ultra soft off-road racing compound rubber tires with...

FEATURES: Fits front of the 2 wheel drive 1/10 scale Traxxas Slash Red colored dual profile beadlock style wheel with chrome finish spokes Off-road tread rubber tires with foam inserts INCLUDES: Two...

Tires & wheels, assembled, glued (SCT Split-Spoke, satin chrome, black beadlock wheels, BFGoodrich® Mud-Terrain™ T/A® KM2 tires, foam inserts) (2) (2WD front)