Traxxas

FEATURES: Satin chrome, black beadlock style wheels SCT style tires with foam inserts 2WD front application INCLUDES: Two SCT Tires pre-mounted on SCT Wheels REQUIRES: Installation on vehicle SPECS:...

.

FEATURES: Satin chrome with red beadlock style 5-spoke Dual profile INCLUDES: Two Red Beadlock Front Wheels REQUIRES: Installation on the Traxxas Slash Tires SPECS: Diameter: 56mm (2.2") outer, 76mm...

FEATURES: Satin chrome, black beadlock style wheels SCT style tires with foam inserts Fits 2WD rear, 4WD front/rear INCLUDES: Two SCT Tires pre-mounted on SCT Wheels REQUIRES: Installation on...

FEATURES: SCT satin chrome wheels Red beadlock design Ultra soft S1 compound Fits 2WD rear, 4WD front/rear INCLUDES: Two SCT 1/10 scale Rear Satin Chrome Off-Road Tires and Wheels REQUIRES:...

FEATURES: Rubber construction, SCT off-road design 5 spoke satin chrome wheels Red beadlock Dual profile INCLUDES: Two Rear Assembled Tires and Wheels with Red Beadlock REQUIRES: Installation on the...

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Black colored wheel with satin chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke...

FEATURES: Plastic construction Satin chrome finish 5-spoke design 12mm hex Dual profile (2.2" outer, 3.0" inner) Beadlock style INCLUDES: One pair of rear satin chrome wheels

FEATURES: Rubber construction SCT off-road racing Foam inserts INCLUDES: Two Off-Road Racing Tires with Inserts for the Traxxas Slash REQUIRES: Mounting to Wheels Tire Glue SPECS: Outer Diameter: 4...

FEATURES: Rubber construction, Mud Terrain T/A KM2 tires 5 spoke chrome wheels Red beadlock INCLUDES: Two Front Assembled Tires and Wheels with Red Beadlock REQUIRES: Installation on the...

FEATURES: Fits front and rear of the 4WD Slash and the rear only of the 2WD Slash Mounted BG Goodrich tires with foams on chrome, red beadlock style wheels in plastic INCLUDES: Two mounted BF...

FEATURES Fits two wheel drive front onlyOff-road rubber treaded tiresSCT split-spoke chrome with green beadlock wheels   INCLUDES Two Mud Terrain T/A KM2 Tires and...

FEATURES: Fits the front of 2WD short course trucks Five spoke plastic wheels, black in color with orange beadlock area INCLUDES: Two Traxxas Short Course Wheels and Tires with Foam Inserts SPECS:...

FEATURES: Fits the front of 4WD short course trucks and the rear of 2WD short course trucks Five spoke plastic wheels, black in color with orange beadlock area INCLUDES: Two Traxxas Short Course...

FEATURES: Steel construction, progressive rate damping For Slash Big Bore shocks INCLUDES: Two Front White Springs REQUIRES: Installation on the vehicle SPECS: Length: 59mm (2.3") Outer Diameter: 16...

FEATURES: Steel construction, progressive rate damping For Slash Big Bore shocks INCLUDES: Two Rear White Springs REQUIRES: Installation on the vehicle SPECS: Length: 71mm (2.8") Outer Diameter: 16...

FEATURES: Metal construction White in color INCLUDES: Two Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS: Length, uncompressed: 69.5mm (2.74") Wire Diameter: 1.4mm (0.05") Inner...

FEATURES: Metal construction, prgressive rate White in color INCLUDES: Two Front Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS: Length, uncompressed: 58mm (2.28") Wire Diameter: 1...

Fits Continued: 1/10 Nitro Slash Traxxas Hub Retainer 17mm M4x.07 (4) (use with #5853X, #6856X, #6469)

FEATURES: Aluminum construction, anodized blue in color INCLUDES: Two 17mm Splined Wheel Hubs Two Short Wheel Nuts Two Long Wheel Nuts Four Steel Hub Retainers Hex Wrench  

FEATURES: Skidplate is constructed of high impact molded black plastic Front of skidplate kicks up at about 40 degrees to shield the differential from crash damage or hard landings from...

.

FEATURES: Nylon construction Black in color INCLUDES: One Front Bumper and bumper mount  

Bumper, front/ bumper mount, front/ adapter (fits 2017 Ford Raptor)

  This is the optional Low CG Conversion Chassis for the 1/10 scale 2WD Traxxas Slash.   FEATURES Plastic construction, black in color Designed to sit 1" (25.4mm) lower that stock...

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic construction, black in colorFastens under front section of low CG...

FEATURES: Gray composite nylon construction INCLUDES: One chassis for the Traxxas Slash REQUIRES: Installing all components onto the chassis SPECS: Length: 338mm (13.3") Width: 189mm (7.44") Height:...

This is the Boat Stand for the Traxxas DCB-M41 40" Twin Hull Catamaran. FEATURES Plastic construction with matte black finish Easy...

 

One x Stuffing tube (assembled with liner).  

 

.

.

.

.

.

.

.

.

.

.

FEATURES: Aluminum construction, blue in color Designed for a clean install of a single brushless motor system in the E-Revo RTR (requires gear cover #5678)INCLUDES: One Aluminum Motor PlateREQUIRES:...

FEATURES: Aluminum construction, blue anodized INCLUDES: One motor plate REQUIRES: Installation on the E-Revo truck SPECS: Width: 3.31" (84mm) (At widest point) Height: 2.91" (74mm) Thickness: 0.13"...

FEATURES: JST Connector INCLUDES: One Rear Harness Six Clear LED Lights Three Zip Ties One Wire Clip REQUIRES: Installation on the vehicle

FEATURES: JST Connectors INCLUDES: One Center Harness One Wire Clip Three Zip Ties REQUIRES: Installation on vehicle

FEATURES: Plastic construction Chrome in color JST Connectors Clear LED Lights INCLUDES: Four LED Lights Two Zip Ties One Y-Harness Instructions REQUIRES: Installation on the vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Heavy Duty Differential Carrier One Front and Rear Linkage Arm One Differential Fork Two X-Ring Gaskets One Ring Gear Gasket Two Bushings One...

FEATURES: Nylon construction Black in color INCLUDES: One Differential Housing REQUIRES: Installation on the vehicle

FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear One Differential Slider One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

FEATURES: Shift Linkage Black nylon construction INCLUDES: One Ball Collar One Spring One Ball Cup One Servo Horn One Linkage Wire One Shift Servo Mount Two 3x8mm screws REQUIRES: Installation on the...

.

FEATURES: Steel construction INCLUDES: Four Cross Pins Four Drive Pins Four Set Screws REQUIRES: Installation on the vehicle

FEATURES: Plastic construction Black in color INCLUDES: Two Long Half Shaft Sets, internal splined half shafts and external half shafts with glued boot REQUIRES: Installation on the vehicle SPECS:...

FEATURES: Plastic construction Black in color INCLUDES: Two Short Half Shaft Sets, internal splined half shafts and external half shafts with glued boot REQUIRES: Installation on the vehicle SPECS:...

FEATURES: Steel construction INCLUDES: Differential CV Output Drive Screw Pin with Threadlock Cross Pin Drive Pin Set Screw REQUIRES: Installation on the vehicle

FEATURES: Steel construction, red in color 5.4 damping rate with double orange stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUIRES: Installation on shock assembly SPECS:...

FEATURES: Black plastic with mounting screws INCLUDES: Rear bumper Rear bumper mount REQUIRES: Installation on truck SPECS: Length: Mount: 3.25" (83mm) Bumper: 7" (178mm)

FEATURES: Black plastic with mounting hardware INCLUDES: Front bumper Front bumper mount REQUIRES: Installation on truck SPECS: Length: Bumper: 7" (178mm) Mount: 3" (78mm)

FEATURES: Nylon construction Black in color INCLUDES: One Rear Bulkhead (left and right halves) REQUIRES: Installation on the vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Front Bulkhead (Left and Right Halves) REQUIRES: Installation on the vehicle

FEATURES: Nylon construction Black in color INCLUDES: One ESC Mounting Plate Two 3x35mm Cap Head Screws Foam Padding REQUIRES: Use with Castle Creations Mamba ESC

FEATURES: Prevents moisture and dirt from entering receiver box INCLUDES: Silicone rectangle shaped O-ring Silicone grease, TRAC6037 Two sections of foam rubber Instruction sheet REQUIRES: Installing...

FEATURES: Nylon construction Installed foam pads Grey in color Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor modification INCLUDES: One Chassis with foam pads Instruction sheet...

FEATURES: Nylon construction Black in color INCLUDES: Front and Rear Body Mount Posts REQUIRES: Installation on the vehicle

FEATURES: Direct drop-in for E-Revo and E-Maxx Transfers power to the front and rear differentials independently Comes assembled with 500K oil For single speed transmission only INCLUDES: One...

FEATURES: Red anodized aluminum construction Black pre-attached ball links INCLUDES: One aluminum link SPECS: Length: 4.1" (105mm) including turnbuckles Diameter: 0.17" (4.3mm) Width: 0.39" (10mm) @...

FEATURES: Optional part used to convert the 2-speed transmission to a single speed 20/31T single speed primary gear INCLUDES: One single speed top shaft One single speed primary gear(20/30T) One 5mm...

FEATURES: Nylon construction Black in color INCLUDES: One Left Gearbox Half One Right Gearbox Half REQUIRES: Assembly onto Vehicle

FEATURES: Optional part Steel sway bar construction Mouting hardware included INCLUDES: One front 1.3mm diameter sway bar One front 1.5mm diameter sway bar One rear 1.5mm diameter sway bar One rear 1...

FEATURES: Black plastic construction One inch wheels INCLUDES: One assembled wheelie bar Four 4X6mm Button Cap Screws REQUIRES: The Jato model 5510 requires installation of batt box part #5515X which...

FEATURES: Steel construction Black in color INCLUDES: Two Differential Output Gears Two Spider Gears Two Spider Gear Shafts REQUIRES: Assembly onto Vehicle

FEATURES: Rubber construction Black and Blue in color INCLUDES: Two Transmission Gasket One Differential Gasket One L-Shaped Foam Strip REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Differential Cover REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Differential Gear 38T One Differential Side Cover One Differential Gasket Two Output Gear Seals Four 2.5mm x 8mm Countersunk Socket Head...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are available separately or mounted and pre-glued...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design is available with a brilliant mirror-chrome or black-chrome...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic All-Star...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design is available with a brilliant mirror-chrome or black-chrome...

 Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face and a natural nylon...

FEATURES: Chrome color twin spoke wheels Alias 2.8" tires pre-mounted and glued with foam inserts 12mm hex INCLUDES: Two chrome rear wheels and tires for the Jato SPECS: Wheel: Outer Diameter: 3.08"...

FEATURES: Nylon construction Black in color INCLUDES: One Brake Came Lever One Linkage Brake Bellcrank One Brake Bellcrank Rod REQUIRES: Assembly onto Vehicle

FEATURES: Metal Construction Black in color INCLUDES: One Input Shaft (Slipper Shaft) One Slipper Shaft Spacer REQUIRES: Assembly onto Vehicle

FEATURES: Installs on either side of brake disc INCLUDES: Two aluminum brake pads, two 3x15mm socket head screws, C clip, pin, hub and spacer REQUIRES: Installing on brake assembly

FEATURES: Composite construction Grey in color INCLUDES: One Composite Brake Disc REQUIRES: Assembly onto Vehicle  

FEATURES: Factory assembled for front installation on the Jato (1.4mm piston), for rear use, the installed pistons must be replaced with included 1.3mm rear pistons INCLUDES: Two GTR Composite...

FEATURES: Metal construction Silver in Color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x 15mm Socket Head Screws w/Washers Two 4mm x 18mm Button Head Screws Two 3mm x 10mm...

FEATURES: Aluminum Construction Blue in Color INCLUDES: One 4° F/R Suspension Tie Bar One F/R Suspension Tie Bar REQUIRES: Assembly onto Vehicle

FEATURES: Aluminum Construction Blue in Color INCLUDES: One 5° Rear Suspension Tie Bar One 3° Rear Suspension Tie Bar REQUIRES: Assembly onto Vehicle

FEATURES: Pot Metal Construction Silver in Color INCLUDES: One Slipper Press Plate One Slipper Press Plate Hub REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Left Rear Stub Axle Carrier One Right Rear Stub Axle Carrier REQUIRES: Assembly onto Vehicle

FEATURES: Metal and nylon construction Black in color INCLUDES: Two Metal Rear Stub Axles w/Nylon Yokes installed REQUIRES: Assembly onto Vehicle

FEATURES: Fully assembled and ready to install, left or right application INCLUDES: One Driveshaft Assembly with 3x12.5mm screw pin REQUIRES: Installing between gearbox and stub axle carriers SPECS:...

FEATURES: Direct replacement parts Rubber sealed boots Fully assembled INCLUDES: Two assembled half shafts REQUIRES: Installation on Jato SPECS: Length: 3.19" (81.01mm) Diameter: .454"(11...

FEATURES: Direct replacement tank Clear nylon construction with spring loaded lid Pre-installed pressure fittings Tank lid has a pull ring for easier refuelling INCLUDES: One replacement complete...

FEATURES: Nylon and Metal construction Black in color INCLUDES: One 3mm x 30mm Threaded Rod Two 3mm Ball Cups Two 3mm Hollow Balls One Nylon Steering Servo Horn REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Gray in color INCLUDES: One Left and Right Steering Bellcrank One Servo Saver One Servo Saver Spring Two Steering Supports Four 4mm x 7mm x 2.5mm Plastic...

FEATURES: Aluminum Construction Anodized Blue in Color INCLUDES: One Drag Link w/Pre-Installed Bearings Four 5mm x 8mm Washers REQUIRES: Assembly onto Vehicle

.

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends Can be Used on Front or Rear INCLUDES: Two 58mm Threaded Rods Four 3mm Ball Ends Four 3mm Hollow Balls REQUIRES:...