Traxxas

FEATURES: Made of clear silicone material Secures tuned pipe to the header (manifold) INCLUDES: One Coupler SPECS: Outside Diameter: 3/4" (19mm) Inside Diameter: 1/2" (13mm) Length: 1" (25mm)

.

FEATURES: Stainless steel construction. INCLUDES: Four 3x70.5mm pins for the upper front and rear suspension arms. Two 3x63mm pins for the lower front suspension arms. Two 3x57mm pins for lower rear...

FEATURES: Durable steel construction INCLUDES: Eight pins REQUIRES: Assembly onto T/E-Maxx SPECS: Length: 65.3mm (2.57") Diameter: 3.2mm (.13") COMMENTS: These are enough hinge pins for the entire...

FEATURES: Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in colorINCLUDES: Skidplate and stainless steel plateREQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Replaces damaged rear skidplates. Constructed of black plastic. INCLUDES: One rear skidplate. REQUIRES: Bolting to bottom of chassis using three 3x10mm countersunk machine screws (not...

FEATURES: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color INCLUDES: Skidplate and stainless steel plate REQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Black nylon construction INCLUDES: One L&R Front Bumper Mount Set One L&R Rear Bumper Mount Set Eight 3x15mm round head machine screws REQUIRES: Nothing. This is a direct...

FEATURES: Replaces stock plastic bumpers. Constructed of molded silver colored plastic. INCLUDES: One dual-tube front bumper One dual-tube rear bumper REQUIRES: Fastening each bumper to the bumper...

These pivot balls are installed through the upper and lower suspension arms and axle carriers and allow camber adjustment of the wheels. FEATURES: Replace stock pivot balls with these hardened heavy...

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks for the Traxxas T-Maxx. REQUIRES: Bolting to each...

.

FEATURES: Features thicker plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color. INCLUDES: Two heavy duty diff yokes Two yoke mounting...

FEATURES: Features strengthened plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color. INCLUDES: Two heavy duty diff yokes Two diff yoke mounting...

FEATURES: Supports center of chassis Gray in color, constructed of hardened plastic INCLUDES: Two Lower Chassis Braces for the T-Maxx 3.3 REQUIRES: Fastens to bottom of chassis with eight 3x12mm Cap...

FEATURES: Replaces damaged or missing body washers. Adhesive on one side allows easy attachment to body. Made of shock absorbing foam that helps to prevent splitting of body at mounting holes...

FEATURES: Threadlocking compound pre-applied. Hardened steel construction. Designed for use with Traxxas R/C kits. Hexagon socket drive insert. INCLUDES: Six 4mm Grubs

These shocks are hard-anodized and PTFE-coated just like the Big Bore shocks, but they have a slightly smaller cylinder diameter and standard steel shafts. A great alternative to the Traxxas Big Bore...

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

.

FEATURES: Made of RULON INCLUDES: Twelve pegs SPECS: length - 3.5mm diameter - 3mm COMMENTS: These pegs go in the holes on the side of the spur gear.

FEATURES: Hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES: Two hardened steel yokes with...

FEATURES: Black plastic construction INCLUDES: Two differntial output yokes Two 3x5mm countersunk screws Two screw pins REQUIRES: Installation SPECS: Length: .70" (18mm) Diameter: .51" (13mm)

This is the Replacement Yokes Set from Traxxas. FEATURES: White nylon differential output yokes. Stainless steel countersunk screws with phillips drive. Black steel grub screws. Used on the Traxxas...

FEATURES: Allows the slipper to slip under stress instead of the diff gears stripping. Better traction control Adjustable tension INCLUDES: One 84 tooth spur One 87 tooth spur Two metal diff...

PACKAGE INCLUDES: 2- Bearings SPECS: 5x10x4mm FEATURES: The bearings are constructed of stainless steel

This is the Glow Plug Lead Wire for the T-Maxx Truck Kit. This wire that is attached to the glow plug that heats it while starting. FEATURES: This is a blue silicone wire. It has one bullet connector...

.

.

.

FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm Socket Head Cap Screws Two 3mm Lock Washers One Paper...

.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Replaces worn brake discs INCLUDES: Brake Disc Steel Adapter

FEATURES: Aluminum construction Hex drives and phillips drive INCLUDES: One engine mount Two upper plates Hardware SPECS: Length of engine mount 64mm (2.51") and Width: 65mm (2.56") Length of left...

Features: Clear plastic, flip-top style tank for glow fuel only. Nipples for fuel outlet and muffler pressurisation are conveniently located on the top of the tank Muffler pressurisation nipple is...

FEATURES: Plastic construction with flip top cap INCLUDES: 5oz (150cc) Fuel Tank with Rubber Vibration Cushion

FEATURES: Blue anodized aluminum construction. Nylon inserts. INCLUDES: Four 5mm locknuts. SPECS: Thickness: 4.95mm (.195")

FEATURES: Chromed steel construction. Nylon inserts. INCLUDES: Eight 5mm locknuts. SPECS: Thickness: 4.95mm (.195")

FEATURES: Black in color INCLUDES: Two clutch shoes One wrap around spring REQUIRES: Installation onto vehicle. SPECS: Length of shoe: 22.6mm (0.89") Height: 8mm (0.32")

FEATURES: Fits all Traxxas 1/10th scale nitro vehicles. Replaces worn or damaged clutch bells. Constructed of hardened steel. INCLUDES: One Traxxas 20 Tooth Steel Replacement Clutch Bell. Two 5mm x...

FEATURES: Fits all Traxxas 1/10th scale nitro vehicles. Replaces worn or damaged clutch bells. Constructed of hardened steel. INCLUDES: One Traxxas 18 Tooth Steel Replacement Clutch Bell. Two 5mm x...

This is the Replacement Recoil Starter Assembly for the Traxxas TRX-12, TRX-15 and Pro-15 Engine. INCLUDES: One Recoil Starter Unit w/String and Handle Installed

.

FEATURES: Aluminum construction, blue in color Designed for a clean install of a single brushless motor system in the E-Maxx 16.8V RTR (requires gear cover number 3997 (not included))INCLUDES: One...

FEATURES: Steel construction, gun metal in color Replaces a worn or damaged idler gear and shaft INCLUDES: One 20 Tooth Idler Gear One 5x18mm Idler Gear Shaft REQUIRES: Installation following the...

.

FEATURES: Black nylon constructionINCLUDES: One 33T output gear Two spacersREQUIRES: Silicone Grease, use #6037SPECS: Outer diameter: 1.37" (35mm) Thickness: 1.02" (26mm)

FEATURES: Plastic washers INCLUDES: Ten Washers SPECS: 6x8x.5  

FEATURES: Constructed of plastic Replaces damaged or broken diff housings INCLUDES: Left and Right Differential Housings and Pinion Collar REQUIRES: Installing all internal diff components

Traxxas Cover Gear/Dust Plug 3x6mm CS

FEATURES: Metal construction, black in color INCLUDES: One transmission output shaft, Part #5369 REQUIRES: Installation on the Traxxas E-Maxx SPECS: Overall length: 2.75" (70mm) Diameter of drive dog...

FEATURES: Plastic servo horn construction Steering rods come with rod ends installed INCLUDES: 2 steering servo horns 1 3x12mm threaded rod steering link with rod ends and hollow balls REQUIRES:...

FEATURES: Metal construction Black in color INCLUDES: Six 3mm x 10mm Shoulder Screws REQUIRES: Assembly onto Vehicle

FEATURES: Steel construction Top Shoulder design (not threaded) Used for attaching the Throttle Bellcrank to Revo chassis INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length:...

FEATURES: Black finish Steel construction Cap head design INCLUDES: (6) 3X32mm cap head machine screws SPECS: Length: 1.260" (32mm) Diameter: .119" ( 3mm) MM Pitch: .5 coarse

Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

FEATURES: Aluminum Construction Blue in Color INCLUDES: Six Button Head Aluminum 4mm x 4mm Screws REQUIRES: Assembly onto Vehicle

FEATURES: Steel construction Black in color Button head design INCLUDES: (6) 4X6mm button head screws SPECS: Length: 1/4" (6mm) Diameter: 3/16" (4mm)

FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 16mm (.63") Threaded...

Fits Continued: 1/10 Revo FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length:...

FEATURES: Steel construction Black in color Low-profile, button-head design Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS: Overall Length: 16mm (.63") Threaded...

  FEATURES: Gray nylon construction INCLUDES: One nylon transmission skid plate REQUIRES: Installation on the E-Maxx SPECS: Length: 4.60" (117mm) Width: 2.40" (61mm)

FEATURES: Replaces damaged receiver boxes Constructed of black plastic INCLUDES: One top and bottom half receiver box for the Traxxas E-Maxx Hardware REQUIRES: Installing receiver and bolting...

FEATURES: Steel construction _ Roll pin pre-installed INCLUDES: One slipper clutch set SPECS: Length: 1.98" (50mm) Diameter: .21" ( 5mm) COMMENTS: This part will fit both the standard and XL version...

FEATURES: Made from black molded nylon For the Traxxas Rustler/Stampede INCLUDES: Dust cover for the Traxxa Rustler 3 x 6 mm round head coarse thread screws (to mount dust cover) Rubber Plug Specs:...

Gear adapter, fixed Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models including Slash, Bandit, Rustler,...

  Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic...

PACKAGE INCLUDES: Twelve 5x8mm bushings.  

 Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face and a natural nylon...

FEATURES: Black chrome plated plastic, five spoke design Split X-Pattern tread tires with foam inserts INCLUDES: One left and one right all-star wheel with Anaconda tires and foam inserts for...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic...

FEATURES: 2.8" All Star black chrome wheels Ribbed pattern INCLUDES: Two 2.8" mounted nitro rear/electric front tires, All Star chrome wheels and foam inserts REQUIRES: Installation on vehicle SPECS:...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias Ribbed tires for no-hassle, out-of-the-box...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias tires for no-hassle, out-of-the-box bolt-on...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. These wheels mounted and pre-glued with Alias tires for no-hassle, out-of-the-box bolt-on...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Made of a black plastic/nylon material. Used to help pre-load the shock springs...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Constructed of molded plastic. Contains enough parts for two shocks. Fits the shocks on most...

Boost durability as you dress up your Traxxas model with anodized style! These new aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra...

Fits all Traxxas vehicles with Ultra Shocks: Slash, Bandit, Nitro Sport, Stampede (nitro and electric), Rustler (nitro and electric), T-Maxx, and E-Maxx

Boost durability as you dress up your Traxxas model with anodized style! These aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra Shocks—Slash, Bandit, Nitro...

Boost durability as you dress up your Traxxas model with anodized style! These new aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap...

FEATURES: Molded Composite Gray in Color INCLUDES: Two ultra shock bodies (long) REQUIRES: Installation SPECS: Length: 1.45" (37mm) Diameter: .51" (13mm)

  FEATURES: Gray composite bodies Stock replacement T-Maxx 3.3 unassembled shocks Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of...

  FEATURES: Replaces damaged or worn shocks. Molded black plastic bodies. Change the dampening rate (firmness) of each shock with different widths of pre-load spacers. INCLUDES: Two Traxxas...

FEATURES: Gray composite bodies Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are...

  PACKAGE INCLUDES: Two UNASSEMBLED long front shocks with pre-load spacers Two medium springs One 1/2 ounce bottle shock oil  COMMENTS: Instructions are not included for assembling...

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Steel construction INCLUDES: Two Rear Shock Springs REQUIRES: Installing over shock bodies

FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 59mm (78mm center to center) turnbuckles REQUIRES: Installation on the vehicle

Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler, Bandit, and the Slash, the ball bearing...

Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler, Bandit, and the Slash, the ball bearing...

FEATURES: White Plastic Construction INCLUDES: One Bellcrank One Link One Arm

FEATURES: Metal construction. Chrome draglink shoulder screws with a phillips drive. Black steering bellcrank shoulder screws with a hexagon socket drive. Coarse thread. INCLUDES: (2) Bellcrank...

This is the Aluminum Turnbuckle set for the Traxxas Dakar Slash, Ford Raptor, Nitro Slash, Rustler, Rustler VXL, Slash, Slash OBA, Slash VXL, Stampede and Stampede VXL.FEATURESAnodized aluminum...