Traxxas

Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

These are stock replacement bearings. Includes: 8 x 3x6x2mm Bearings

These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES: Plastic construction, blue in colorFor use with the Low CG chassisFastens to sides of chassis to absorb...

Fits Continued: 1/10 Slash R.G.D. / Ford Raptor / Nitro Jato 3.3 / Revo / T-Maxx FEATURES: Tires constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls Aluminum...

This is the Traxxas 7-Cell 8.4V 3000mAh iD Power Cell NiMH Stick Battery Pack FEATURES New high current connector with gold-plated copper...

.

.

.

.

13-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

This is a replacement 40T Spur Gear for the Traxxas Revo. This gear meshes with the clutch bell. FEATURES Black plastic construction ...

FEATURES: Machined steel construction CV style INCLUDES: One CV Style Stub Axle One Cross Pin One Drive Pin One Set Screw REQUIRES: Installation on the vehicle SPECS: Length: 49mm (1.9")

FEATURES: For use with Traxxas glow powered vehicles Equipped with a magnet that enables an RPM sensor to read RPM data INCLUDES: Traxxas 35mm Flywheel with Magnet REQUIRES: Traxxas TQi Radio System...

FEATURES: Steel construction   INCLUDES: Three Pinion Gear with set screw

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

Description: Traxxas Driveshaft Center Aluminum - TRA8355 This item package consists of the following Traxxas items. Driveshaft, center, aluminum / pin   For FORD GT

FEATURES: Nylon Construction           Black in Color   INCLUDES: Three Spur Gears

.

.

.

Description: Traxxas Suspension Front Arms - TRA8333 This item package consists of the following Traxxas items. Suspension arms, front (left & right)   For FORD GT

Description: Traxxas Stub Axles (2) - TRA8354 This item package consists of the following Traxxas items. Stub axles (front or rear) (2)   For FORD GT

.

Ball bearings, black rubber sealed (5x10x4mm) (2)

Description: Traxxas Batter Hold Down - TRA8327 This item package consists of the following Traxxas items. Battery hold-down/ battery clip/ hold-down post/ screw pin/ pivot post...

Description: Traxxas Housing, Differential (Rear) - TRA8380 This item package consists of the following Traxxas items. Housing, differential (rear)   For FORD GT

part number: TRA8371 Traxxas 8371 Wheels 1.9 split-spoke (black chrome) (front) (2) Brand new item, sealed in original retail packaging. Wheels, 1.9' split-spoke (black chrome) (front) (2) For...

Description: Traxxas Steering Bellcranks - TRA8343 This item package consists of the following Traxxas items. Steering bellcranks/ hardware   For FORD GT

Description: Traxxas Camber Link This item package consists of the following Traxxas items. Camber link/toe link set (plastic/ non-adjustable) (front & rear)   For FORD GT

Description: Traxxas Servo Saver This item package consists of the following Traxxas items. Servo saver/ servo saver spring/ servo horn, steering   For FORD GT

.

Description: Traxxas Front Bumper - TRA8335 This item package consists of the following Traxxas items. Bumper, front (1 each, upper & lower)   For FORD GT

Description: Traxxas Spur Gear 70-Tooth - TRA8357 This item package consists of the following Traxxas items. Spur gear, 70-tooth   For FORD GT

Output gears (2), spider gears (4), spider gear shaft (2))

.

Description: Traxxas Drive Cups - TRA8353 This item package consists of the following Traxxas items. Drive cups, inner (2)/ screw pins (2)   For FORD GT

4x12mm BCS stainless (4)/ 3x18mm BCS (stainless) (2)/ NL 3.0 (2)

.

.

.

Description: Traxxas Suspension Arms, Rear (Left & Right) This item package consists of the following Traxxas items. Suspension arms, rear (left & right)

Ball bearings, black rubber sealed (7x14x5mm) (2)

.

.

Description: Traxxas Spring Shock (Red) (2) - TRA8362 This item package consists of the following Traxxas items. Spring, shock (red) (2)   For FORD GT

Description: Traxxas Spring Shock (Red) (4.4 Rate, Black Stripe) (2) - TRA8364 This item package consists of the following Traxxas items. Spring, shock (red) (4.4 rate, black stripe)...

Ball bearing, black rubber sealed (17x26x5mm) (2)

.

.

Description: Traxxas Chassis - TRA8322 This item package consists of the following Traxxas items. Chassis   For FORD GT

.

.

.

.

.

.

.

Description: Traxxas Driveshaft Front (2) - TRA8350 This item package consists of the following Traxxas items. Driveshaft, front (2)   For FORD GT

.

.

.

Requires #8216 ExoCage Fits #8011 Body

.

Description: Traxxas Chassis Brace (Front) - TRA8321 This item package consists of the following Traxxas items. Chassis brace (front)   For FORD GT

Description: Traxxas Steering Blocks (2) This item package consists of the following Traxxas items. Steering block (2)   For FORD GT

 

.

.

FEATURES: Aluminum construction          Silver in colorINCLUDES: Two Shock Shafts

This is an optional Traxxas RPM Sensor Mount Set, and is intended for use with a Traxxas nitro vehicle when wanting to use the optional Traxxas RPM sensor (TRA6520/TRA6522). The sensor mount...

FEATURES: Replaces damaged or worn spur gears Constructed of plastic INCLUDES: One 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx Truck REQUIRES: Installing in gearbox between the drive hub...

.

FEATURES: Nylon and rubber constructionINCLUDES: Two Diff Gear Covers          Two Large O rings          Two...

Fits Continued: 1/10 Slash R.G.D. / Ford Raptor / Nitro Jato 3.3 / Revo / T-Maxx FEATURES: Machined blue aluminum ball bearing equipped wheels Rubber Tires INCLUDES: Two rubber tires, four 5x8mm ball...

FEATURES: Black nylon construction INCLUDES: One upper rear suspension arm One lower rear suspension arm REQUIRES: Nothing. These are direct replacement parts. COMMENTS: Since these are symmetrical,...

 

FEATURES: Black nylon construction INCLUDES: One upper rear and one lower rear suspension arm REQUIRES: Removing stock suspension arms Adjusting camber and toe after installing Adjustable Suspension...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Replaces damaged or worn idler gears Constructed of steel INCLUDES: One 16 Tooth Steel Idler Gear for the Traxxas T-Maxx Truck One 3x6mm and one 8.3x8mm flat metal washers One 8x12x0.5mm...

FEATURES: Plastic construction, white in color INCLUDES: Two Dish Rear Wheels in White REQUIRES: Tires Tire Glue  SPECS: Diameter: 3.4" (87mm) Width: 2" (51mm) Hex Size: 17mm

.

  This is the Traxxas 8.4V 3300mAh Hump NiMH Battery Pack. FEATURES New high current connector with gold-plated copper...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

.

FEATURES: Prevents moisture and dirt from entering receiver boxINCLUDES: Silicone O-ring          Silicone...

FEATURES: Anodized aluminum construction, red in color Black nylon ball ends and steel link set INCLUDES: One 39mm red aluminum turnbuckle set with instructions REQUIRES: Installation onto vehicle

FEATURES: Fastens to bulkhead and helps to support axle carriers Black in color, constructed of hardened plastic INCLUDES: One Right and one Left Upper Suspension Arm for the T-Maxx 3.3 REQUIRES:...

FEATURES: Red in color Orange band on spring indicates 3.2 tension rating INCLUDES: Two 3.2 rear shock springs REQUIRES: Nothing. These are direct fit springs. SPECS: Length: 1-3/4" (44mm) Outer...

FEATURES: Blue anodixed aluminum (2.5mm thick) INCLUDES: One front & one rear Tie Bar w/one 3x10mm button head screw TRAC2577 REQUIRES: TRAC2579 2579 Button Head Screw 3X15mm for rear COMMENTS:...

FEATURES: Steel construction   INCLUDES: Three Pinion Gears with set screw

FEATURES: Red plastic shock pistons with 2 x.5mm holes          Back plastic travel limitersINCLUDES: Four shock...

FEATURES: Steel construction   INCLUDES: Three Pinion Gears with set screw

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic These rubber cap diaphragms for Traxxas plastic shocks, also...