Traxxas

FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place   ...

FEATURES Steel construction Fastens bottom of shocks to lower front and rear suspension arms   INCLUDES ...

FEATURES Steel construction Fastens lower rear suspension arms to chassis   INCLUDES Two...

This is the Front or Rear Corner Suspension Pin Set for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction Fastens...

This is the Front Shock Tower for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic construction, dark...

FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   ...

FEATURES Molded composite plastic construction Supports the driveshaft and stub axles, and is held in place by the upper and lower suspension...

FEATURES Molded composite plastic construction Fits lower left front suspension Fastens to lower section of caster block and front lower...

FEATURES Molded composite plastic construction Fits lower right front suspension Fastens to lower section of caster block and front lower...

FEATURES Molded composite plastic construction Fits both front and rear suspension   INCLUDES ...

FEATURES Steel construction Mounts upper and lower bulkhead halves in place   INCLUDES One...

FEATURES Replaces damaged or missing receiver box seal and cushions Silicone grease helps to seal receiver box to chassis   ...

FEATURES One-piece molded composite plastic construction Separate molded compartments for ESC, batteries and more   ...

FEATURES One-piece molded composite plastic construction Holds the steering, differential, skidplate and lower control arm assemblies   ...

FEATURES Molded composite plastic construction with thin foam strip to cushion battery Holds both batteries in place on the top chassis...

    FEATURES One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and...

These are the Front and Rear Body Mounts for the Traxxas X-Maxx Monster Truck     FEATURES One-piece molded composite plastic...

X-Maxx ProGraphix Body w/ Decal Sheet - Pre-cut  

X-Maxx Clear Body w/ Decal Sheet - Pre-cut Requires: Paint

FEATURES Replaces stock plastic body shocks-more rugged with better stability and handling, and better damping over jumps and bumps PTFE-coated...

FEATURES Rebuilds two shocks   INCLUDES Two each, Bladders, Pistons, Shaft Guides, Caps, Rod EndsFour Clips

INCLUDES2 x Shocks, oil-filled (assembled with springs)

FEATURES Composite plastic constructionTransfers power from differentials to wheels   INCLUDES Two Front or Rear Driveshaft Assemblies

FEATURES Metal constructionStock replacement pinion gear   INCLUDES 10 Tooth Pinion GearSet ScrewTwo 3x4mm Phillips Head ScrewsMetal Plate

FEATURES Composite plastic constructionStock replacement spur gear   INCLUDES 60T Spur Gear

FEATURES Molded plastic construction, blue in color   INCLUDES Front and Rear Shock Tower with black plastic Braces

FEATURES Plastic constructionNon-adjustable   INCLUDES Four Camber LinksTwo Toe Links

FEATURES Plastic construction, black in color   INCLUDES Front and Rear Bumpers for the Teton Monster Truck

FEATURES Composite plastic constructionFastens to front or rear bulkheads   INCLUDES Two Front or Rear Suspension Arms

FEATURES Plastic construction, black in colorInstalls in shock towers and holds front and rear of body in place   INCLUDES Front and Rear Body Mounts for the Teton Monster Truck

FEATURES Clear molded polycarbonate construction Trimmed out wheel arches and body post holes   INCLUDES ...

.

 

Compatible Products Traxxas Pivot Balls, Black 6pc, Silver 2pc: LaTrax TRA7540 is compatible with TRA76054T1, TRA76054T2, TRA76054T3, TRA76054T4

FEATURES Replaces worn bellcranks and related components to restore propersteering and control   INCLUDES Two Bellcranks, Servo Saver, Spring, Spring Retainer, Draglink andtwo Posts

This is an optional LaTrax Carbon Fiber Conversion Kit, intended for use with the LaTrax 1/18 Rally Car. This kit includes the carbon fiber chassis, upper chassis, battery hold down, adhesive foam...

Included: 1 x LaTrax Rally Orange Body Painted 1 x LaTrax Rally Decal Sheet

FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Motor Plate  

FEATURES: Made of black plastic. INCLUDES: One cover gear One wire retainer

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

FEATURES: Tread pattern designed for use in gravel Twelve spoke design, white in color INCLUDES: Two Rally Gravel Pattern Short Course Tires with Foam Inserts and Wheels SPECS: Diameter: 4.26"...

This is a pack of two replacement Traxxas Green Wheels, and are intended for use with the Traxxas 1/10 Rally Racer. These wheels can be used in the front or rear of the vehicle.

.

FEATURES: Tread pattern designed for use in gravel Rubber construction INCLUDES: Two Rally Gravel Pattern Short Course Tires with Foam Inserts REQUIRES: Short Course truck wheels Tire Glue SPECS:...

.

.

FEATURES Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES Two XX-Long Traxxas GTR Shocks Bottle of Silicone Shock...

Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these...

FEATURES Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES Two Long Traxxas GTR Shocks Bottle of Silicone Shock...

Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

This is the set of Traxxas Long GTR Shock Springs with 0.892 Blue Compression Rate. FEATURES Steel construction, white in...

.

.

FEATURES: Made of black plastic. INCLUDES: One skid plate SPECS: Length: 3-11/16" (68mm) Width: 5-3/4" (146mm) Height: 1-1/8" (29mm)

FEATURES: Foam construction, black in color Installs on chassis underneath front of body to help absorb frontal impacts INCLUDES: Body Bumper Foam for the Traxxas 1/10 scale Rally Car SPECS: Width: 7...

FEATURES: Made of black plastic INCLUDES: One bulkhead SPECS: Length: 3" (76mm) Width: 2-13/16" (71mm) Height: 2" (51mm)

FEATURES: Made of black plastic. INCLUDES: One battery hold-down One tall front hold-down retainer One tall rear hold-down retainer SPECS: hold-down, length: 7-5/8" (194mm) width: 1-1/4" (32mm)...

FEATURES: Made of black plastic INCLUDES: Three different pieces COMMENTS: This battery holder is a replacement part.

FEATURES: Plastic construction, black in color INCLUDES: Upper and lower Case Halves with Wire Cover Gasket Two Foam Pads Two 3x12mm Button Head Cap Screws Two 3x6mm Button Head Cap Screws Two 2...

  Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/10 Rally, the Traxxas Low-CG chassis is...

FEATURES: Blue aluminum construction          Holds 550 size motor in placeINCLUDES: One motor plate

.

FEATURES: Foam construction          Black in colorINCLUDES: One foam body bumper

FEATURES: GTR shock springs for the 1/16 Summit          Steel constructionINCLUDES: Two SpringsREQUIRES: Installation onto shocksSPECS:   ...

.

FEATURES: Nylon construction          White in colorINCLUDES: One Wing          Decal SheetREQUIRES:...

FEATURES: Nylon construction          Black in colorINCLUDES: One Wing Mount          Two 2.9x9.75mm Button...

This is the Traxxas Titan 380 18 Turn Brushed Motor.FEATURES: 18 turn, used in Traxxas 1/16 scale vehiclesINCLUDES: One Titan 380 Motor with 4mm bullet connectors

FEATURES: Steel construction, black in colorINCLUDES: Two Drive Cups

.

FEATURES: Nylon construction          Red in colorINCLUDES: Two Front and two Rear Toe Links          Eight...

FEATURES: Blue rubber sealed          May also be used in any vehicle where this size bearing is requiredINCLUDES: Two Ball BearingsREQUIRES: Installation...

Fine-tune your model for high-grip racing with this track-tested sway bar set. Sway bars reduce chassis roll and increase corner speed on high-traction surfaces—perfect for...

FEATURES: Steel construction Black and silver for soft and hard INCLUDES: 2 front sway bars 2 rear sway bars REQUIRES: Installation on vehicle

Bearing adapter, 6160-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (blue rubber sealed) (1) (for slipper shaft) FEATURES: 6061-T6 anodized blue aluminum construction Steel 10x15x4mm ball...

FEATURES: 6061-T6 anodized blue aluminum construction Steel 10x15x4mm ball bearing with blue rubber seal Used on slipper shaft INCLUDES: One aluminum adapter One 10x15x4mm ball bearing REQUIRES:...

The machined Aluminum Motor Plate offers rock-solid mounting security for major horsepower in all Slash 4X4 and 1/10 Rally models. Brilliant anodizing with bright aluminum highlights show off the...

FEATURES: Hardened steel construction INCLUDES: One Drive Hub One Screw Pin REQUIRES: Installation on the vehicle SPECS: Length: 19mm (0.75") Diameter: 12mm (0.47")

FEATURES: Nylon and steel construction INCLUDES: One Center Rear Drive Hub REQUIRES: Installation in drive assembly

FEATURES: Black nylon, aluminum and steel construction INCLUDES: Two housing pieces Two X-ring gaskets Two ring gear gaskets/bushings Two 5x10x0.5mm TW Four 2.5x8mm CCS REQUIRES: Installing all diff...

FEATURES: Steel construction Replaces worn or damaged center differential gears INCLUDES: Two Output Gears Two Spider Gears One Spider Gear Shaft REQUIRES: Diassembly of differential

FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

FEATURES: Steel construction INCLUDES: One Differential Ring Gear One Differential Pinion Gear REQUIRES: Installation in differential assembly SPECS: Pinion Gear: Tooth: 13T Inner Diameter: 5mm (0...

FEATURES: Nylon construction Black in color INCLUDES: One Gear Cover One motor wire hold down REQUIRES: Installation on the vehicle

.

FEATURES: Mounted BG Goodrich tires with foams on Split Spoke Satin chrome, black beadlock style wheels in plastic INCLUDES: Two mounted BF Goodrich Mud Terrain T/A KM2 tires with foams Two Split...

Tires & wheels, assembled, glued (SCT Split-Spoke black chrome beadlock style wheels, BFGoodrich® Mud-Terrain™ T/A® KM2 ultra-soft S1 compound off-road racing tires, foam inserts) (2) (4WD f/r,...

FEATURES: Fits two wheel and four wheel drive 1/10 scale Traxxas Slash Off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) SCT split-spoke chrome with red...

FEATURES: Fits front and rear of the 4wd 1/10 scale Traxxas Slash and the front of the 2wd Slash Off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) SCT...

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke Wheels in...

FEATURES: Fits two wheel and four wheel drive 1/10 scale Traxxas Slash Off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) INCLUDES: Two Mud Terrain T/A KM2...

FEATURES: Ultra-soft S1 off-road racing compound Dual profile Gray foam inserts INCLUDES: Two Dual Profile 4.3x1.7-2.2/3.0" Kuhmo Tires with Inserts REQUIRES: 2.2" wheels SPECS: Outer Diameter: 4.3"...

FEATURES: Rubber construction Dual profile Foam inserts INCLUDES: Two Dual Profile 4.3x1.7-2.2/3.0" Kuhmo Tires Two Foam Inserts REQUIRES: 2.2" wheels SPECS: Outer Diameter: 110mm (4.3") Inner...