Traxxas

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic constructionFastens under front section of low CG chassis INCLUDES: Lower...

These are the Left and Right Rear Shock Towers for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic...

FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Front...

This is the Receiver Box and Wire Cover for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic receiver box with...

FEATURES Molded composite plastic construction Fastens to each side of the chassis to help reduce damage from side impacts   ...

FEATURES Molded composite plastic construction Fastens to chassis top brace and holds battery hold downs in place   ...

Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

FEATURES: Nylon construction          Black in colorINCLUDES: One Front Body Mount          One Rear Body...

FEATURES: Nylon construction          Black in colorINCLUDES: One Center Differential Kit

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Black colored wheel with satin chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke...

FEATURES: Fits two wheel and four wheel drive 1/10 scale Traxxas Slash Ultra soft S1 off-road rubber treaded tires Dual profile (inner diameters of 2.2" (56mm) and 3.0" (76mm) INCLUDES: Two Mud...

FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly Screw pin REQUIRES: Installation on vehicle

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES Composite plastic construction, black in color Fastens to front of chassis and holds...

Driveshaft, center, 6061-T6 aluminum (red-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

FEATURES: Grey plastic construction INCLUDES: One Grey Plastic Chassis Plate REQUIRES: Installing all compoments onto chassis SPECS: Length: 10.25" (260mm) Width: 5.12" (130mm) Weight: 5.82oz (165g)

Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)Replacement part for these models:4-Tec® Drift Ford® Mustang®

FEATURES For use with the Traxxas Link app and TQi radio system. INCLUDES Traxxas Link TQi Wireless...

FEATURES: 118+mph speed rated belted slicks with foam inserts Split spoke plastic wheels with black chrome finish Stock replacement tires and wheels INCLUDES: Two Rear Slicks with Foam Inserts and...

FEATURES: Stock replacement wheels Plastic construction with black chrome finish 17mm splined hex for greater degree of grip and less chance of slippage INCLUDES: Two Split Spoke Rear...

FEATURES: 118+mph speed rated belted slicks with foam inserts Dished design black plastic wheels INCLUDES: Two Rear Slicks with Foam Inserts and two Wheels SPECS: Outer Diameter: 4.29" (109mm) Width:...

Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)Replacement front bumper and mount for 5894 2WD Slash LED light kit.Replacement part for these models:SlashAccessory part...

These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES: Plastic construction, blue in colorFor use with the Low CG chassisFastens to sides of chassis to absorb...

FEATURES: Constructed of aluminum, silver in color INCLUDES: One Exhaust Header for the Traxxas Jato REQUIRES: Attaching to engine and rubber coupler SPECS: Distance between mounting holes: 0.87" (22...

FEATURES: Nylon Construction Black in Color INCLUDES: Two Wing Supports One Wing Mount Four 4mm x 8mm Cap Head Socket Screws Four 3mm x 12mm Cap Head Socket Screws One Instruction Sheet REQUIRES:...

FEATURES: Nylon construction, black in color INCLUDES: Two long steering servo horns Two short steering servo horns Two 3x20mm turnbuckles REQUIRES: Installation on the vehicle  

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum anodized fire red in...

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum Anodized black in...

These are the (optional) Red Aluminum Pushrods for the Rocker Arms These go between the Rocker Arms and the Lower Suspension Arms **Must be used with Progressive-3 Rocker Arm Set.** FEATURES: Red...

FEATURES: Blue anodized header Cooling fins on mounting flange INCLUDES: One header Two allen mounting screws One O-ring for sealing the header SPECS: Length: 1.64" (41mm) Width: 1.69" (43mm) Height:...

.

FEATURES: Nylon 2.2" dish wheels          White in color          Response Pro 2.2" tiresINCLUDES: Two...

FEATURES: Plastic constructionINCLUDES: Two 2.2" WheelsREQUIRES: 2.2" Tires          Tire Glue SPECS:    Outer Diameter: 2.2" (55...

FEATURES: Talon tread          Gray foam insertsINCLUDES: Two Talon Tires with Foam InsertsREQUIRES: Installation on the...

FEATURES: Steel construction          Red in color          2.22 rate, blackINCLUDES: Two GTR Shock...

This is a pair of GTX Shocks for the Traxxas X-Maxx FEATURES Aluminum bodies, anodized color Fully assembled, springs not included ...

FEATURES One-piece molded composite plastic construction   INCLUDES Front...

FEATURES Molded composite plastic construction   INCLUDES One each; Bumper Mount and Rear...

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 0.711 Orange Compression Rate. FEATURES Steel construction,...

FEATURES: Hardened plastic construction Black in color INCLUDES: Two front differential housing halves REQUIRES: Installation around assembled differential components

FEATURES: Metal Construction, installs in gearbox behind the primary clutch assembly Black in color INCLUDES: One Metal Primary Shaft One One Way Bearing One Snap Ring One 5mm x 8mm x .5mm...

FEATURES: Nylon construction Enhances tuning ability of suspension by controlling compression and rebound rate of shocks INCLUDES: One Variable Damping Kit for GTR Shocks: #1, #2 and #3 pistons and...

This is the Traxxas 2.5R Racing Engine with IPS (Integrated Pilot Shaft) and Pull-Start.For use in all Traxxas vehicles that use the TRX 2.5 engine.This engine is a .15 engine. The 2.5 refers to a...

Our high-quality aluminum Big Bore shocks are packaged in convenient 8-packs just for Maxx Truck enthusiasts. The Big Bore shocks are hard-anodized and PTFE-coated for the smoothest operation...

.

.

This is the Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. FEATURES: Blue silicone insulated wire with pre-installed...

.

This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires Pre-installed...

FEATURES: All wires included in an EZ starting system INCLUDES: One complete Wire Set with connectors Two zip ties One adhesive foam pad

.

FEATURES: Replaces worn diff carriers gaskets and spacersINCLUDES: Diff Carrier and Gaskets5381 Steel Spider Gear Braces (not used with Revo) Instruction sheetREQUIRES: Disassembly of differential,...

FEATURES: Black metal 3x25mm grub screws. Silver metal 3mm locknuts with nylon inserts. INCLUDES: Eight 3x25mm Grub Screws Eight 3mm Locknuts

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

FEATURES: Composite nylon construction, black in color Install one way and you can secure battery packs up to 21mm in height flip it over and install for battery packs up to 28mm in height Two sets...

Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)Enhance steering precision, strength, and looks with Traxxas aluminum steering...

.

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

FEATURES: Sturdy plastic construction, metal fuel nipple pre-installed and spring loaded cap for fast fill-ups. INCLUDES: 1 assembled fuel tank. SPECIFICATIONS: Length: 2-3/8" Width: 1-7/16"...

FEATURES: Plastic construction Black in color Futaba typecConnectors INCLUDES: One On/Off Switch Harness w/Charge Cord. REQUIRES: Assembly onto Vehicle

.

FEATURES: Plastic waterproof blue case 80 oz-in torqueTransit time 0.23 sec/60° INCLUDES: One high torque waterproof servo with J style connector SPECS:    Length: 2.16"...

Fits Continued: 1/10 Nitro Slash / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler / T-Maxx Classic FEATURES: Black plastic...

 These nylon wheels are lightweight and strong, which makes them perfect for racing. The dished wheels also repel dirt and mud and can be dyed any color. Includes: 2 white nylon 2.2 inch rear...

.

Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications. The out-of-the-box spur gear is a 36-tooth.   FEATURES: Nylon...

FEATURES: Stock motor supplied with the Traxxas Stampede and Rustler series          Preinstalled leads, capacitors and connectors INCLUDES: Traxxas Titan...

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit. The...

FEATURES: Pistol-style grip Steering trim knob Set button Power switch on base of unit INCLUDES: one transmitter REQUIRES: Four AA batteries SPECS: Overall, height: 8-3/8" (210mm) width: 3" (76mm)...

FEATURES: Stock replacement wheels Plastic construction with black chrome finish 17mm splined hex for greater degree of grip and less chance of slippage INCLUDES: Two Split Spoke Front...

FEATURES:100-Watt outputRecognizes Traxxas iD® batteries to automatically program and optimize charger settingsCharge a NiMH and LiPo at the same timeCharge progress indicatorOptimized for faster...

Add some high-impact style to your X-Maxx® with these ready-to-mount wheels and tires. The wheels come pre-assembled and glued to Maxx® AT 8.0″ x 4.0″ tires with foam inserts. Sold as a left and...

Add some high-impact style to your X-Maxx® with these ready-to-mount wheels and tires. The wheels come pre-assembled and glued to Maxx® AT 8.0″ x 4.0″ tires with foam inserts. Sold as a left and...

Restore your GTX™ shocks' performance with this shock rebuild kit. Kit includes assembled lower cartridges, pistons, piston nuts, and bladders. One kit refreshes two shocks.Replacement part for these...

Rear upper bulkhead fits 8s X-Maxx® and XRT®Replacement part for these models:X-Maxx® UltimateXRT® UltimateXRT®

Battery compartment spacer for use with 2872X batteryAccessory part for these models:Maxx®

Pair of Kumho off-road tires come pre-glued and mounted with foam inserts to satin-chrome SCT wheels with beadlock-style trim. Fits 12 mm hex, 2WD front only.Accessory part for these models:Ford®...

Replacement hardened steel rear center driveshaft for 9655X hardened steel center CV driveshafts. (Does not fit standard center driveshafts)Accessory part for these models:Sledge®

The TRX-4® Land Rover® Defender® body comes fully painted and trimmed out of the bag with pre-drilled body holes. Includes decals. Body accessories and ExoCage sold separately. Fits 324 mm wheelbase...

Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies...

High-Torque 600 Brushless Digital ServoThe Traxxas High-Torque 600 brushless servo is the ultimate steering upgrade for your 1/10 or 1/8 scale vehicle. With nearly 600 oz-in of torque at 6 volts and...

FEATURES: For use in all Traxxas TRX2.5 and TRX 3.3 equipped vehicles Pull starter can be removed to install the EZ Start 60% more peak power than the TRX2.5, with nearly 50% more power under...

FEATURES Connects both batteries in series to the electronic speed control 16AWG size wire Traxxas High Current connectors with gold plated terminals ...

.

Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)Lightweight and great looking, these anodized aluminum flange lock nuts are the perfect finishing touch for your truck. The serrated...

Body, Land Rover® Defender®, blue (painted)/ decalsProGraphix® TRX-4® Defender® bodies come painted and trimmed out of the bag with pre-drilled body holes. Body accessories sold separately. Includes...

Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

Turnbuckles, aluminum (green-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your...

Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)Traxxas aluminum steering blocks improve the appearance, ruggedness, and control of your...

Wheelie bar, assembled (orange) (fits Slash, Bandit®, Rustler®, Stampede® series)The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies...

Bulkhead tie bars, front & rear, aluminum (green-anodized)Set of front and rear bulkhead tie bars with a brilliant green anodized finish.Accessory part for these models:Ford® Fiesta® ST...

Wheelie bar, assembled (red) (fits Slash, Bandit®, Rustler®, Stampede® series)The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies...

Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)Traxxas’ aluminum toe links make it easy to add strength and...

Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)Accessory part for these models:Ford® F-150 RaptorFord®...

Turnbuckles, aluminum (pink-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Steering blocks, 6061-T6 aluminum (green-anodized), left & rightTraxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum...

Steering blocks, 6061-T6 aluminum (orange-anodized), left & rightTraxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum...

Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & rightAccessory part for these models:Ford Fiesta® ST RallyHoss™ 4X4 VXLRustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4...

LED tail light kit (fits #8311 body)

Description: Traxxas Housing, Differential (Front) - TRA8381 This item package consists of the following Traxxas items. Housing, differential (front)   For FORD GT