Traxxas

Includes: One left and one right gearbox half. Features: Tough black nylon construction. Specs: N/A--these will only work with these two kits. Requires: All the internal gears and shafts...

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

.

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

The Traxxas 2.8" Talon tires are the most versatile all-terrain tires available for your Traxxas model. The directional long-wear tread pattern provides extended tire life, while providing...

FEATURES: Fits the REAR of the nitro Stampede and Rustler and the FRONT of the electric Stampede and Rustler 2.8" All Star black chrome wheels Talon tires with foam inserts INCLUDES: Two 2.8" mounted...

FEATURES: Fits the Rear of the nitro Stampede or Rustler or the Front of the electric Stampede or Rustler 2.8" All Star chrome wheels Talon Tires For the Front of the Stampede INCLUDES: Two 2.8"...

 Talon assembled and glued 2.8" tire sets make it easy to maintain peak performance. Talon tires are proven to provide "just-right" grip and handling on a wide variety of surfaces. Soft rubber...

 Talon assembled and glued 2.8" tire sets make it easy to maintain peak performance. Talon tires are proven to provide "just-right" grip and handling on a wide variety of surfaces. Soft rubber...

Includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware) (grill sold separately.

.

FEATURES: Gray plastic construction INCLUDES: Two wheel hubs Two 2.5mmX12mm axle pins SPECS: Hex size: 12mm Width: .32" (8mm)

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

FEATURES: Made of a black plastic/nylon material. Also called the rear hub or hub carrier. Has 2 possible mount locations for the outer hinge pin shaft. INCLUDES. 2 Stub alxe carriers. COMMENTS: This...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 61mm (96mm center to center) turnbuckles REQUIRES: Installation on the vehicle

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two front 39mm (69mm center to center) turnbuckles and instruction sheet REQUIRES: Installation on the...

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler / T-Maxx Classic FEATURES: Black steel construction Screws are half-threaded/half-smooth Phillips head INCLUDES: Six...

FEATURES: Grey Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS: Short Length: 77 mm (3.03") Width: 9 mm (0.354") Height: 4 mm (0.157") Long Length: 90 mm (3.54") Width: 9 mm...

FEATURES: Black Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS: Short Length: 77 mm (3.03") Width: 9 mm (0.354") Height: 4 mm (0.157") Long Length: 90 mm (3.54") Width: 9...

FEATURES: Durable steel construction INCLUDES: Two 48mm pins Two 34mm pins Two 30mm pins Two 28mm pins Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

FEATURES: Made from black molded nylon For the Traxxas Stampede SPECS: Height: 2 3/4" Thickness: 1/4" Width at base: 2 3/4" Width at top: 2"

FEATURES: Steel construction Natural color INCLUDES: Two front axles REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 32mm (1.26") Diameter: 5mm

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball...

.

FEATURES: T-6061 aluminum construction, green in color INCLUDES: One Left and Right Alloy Steering Block Four 5x11mm Ball Bearings

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball...

PACKAGE INCLUDES: Two steering blocks (one left and one right)

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

.

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

FEATURES: Black Plastic Construction INCLUDES: Two Blocks  

FEATURES: Properly seals receiver box to minimize dirt and moisture exposure INCLUDES: Silicone grease One Gasket Two Foam Strips Instructions REQUIRES: Application to receiver box

FEATURES: Nylon construction Black in color INCLUDES: One Receiver Box One Rubber Seal Foam Padding Two 2.5x8mm Cap Head Screws Two 3x10mm Cap Head Screws Two 2.5x10mm Cap Head Screws One Tube of...

FEATURES: Plastic construction, gray in color Metal posts and body clips INCLUDES: One battery hold down One receiver hold down Two metal posts Two body clips Servo tape/adhesive foam pad  

FEATURES: Plastic construction, blue in color INCLUDES: Front Bumper with Mount and Mounting Screws

.

.

Traxxas Front/Rear Body Mounts/Posts

FEATURES: Clear lexan construction Pre-trimmed INCLUDES: One clear body One decal sheet with window, grill and lights decals REQUIRES: Body Mounts, Polycarbonate Paint SPECS: Length: 16.5" (419.1mm)...

These are constructed of black plastic and are the posts that the lexan truck body attaches to. PACKAGE INCLUDES: One front body mount One rear body mount COMMENTS: Does not include body clips

FEATURES: Clear silicone construction INCLUDES: One Silicone Tube SPECS: Length: 203mm (8") Inner diameter: 8mm (0.32") Outer diameter: 14mm (0.55")

Display your Traxxas boat when it is not on the water with this Boat Stand from Traxxas. FEATURES Black plastic construction Four...

.

Dual cooling fan kit (with shroud), Velineon 1200XL motor

.

This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control/Velinion 380 motor combo, and is intended for use with 1/16 scale vehicles. The Velineon ESC simplifies...

his is the Heat Sink for the Velineon 1600XL Brushless Motor used on the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Aluminum...

This is the Rebuild Kit for the Traxxas Velineon 3500kV Brushless Motor.       FEATURES Restores like new performance to the...

.

FEATURES: Steel construction INCLUDES: Six 3x8mm Washer Head Self Tapping Screws REQUIRES: Phillips screwdriver SPECS: Length: 8mm Diameter: 3mm

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Jato 3.3 Features: strong steel designSpecifications: 2.5x10mm sockethead screwIncludes: Six 2.5x10mm sockethead screws

.

.

FEATURES: Steel construction Phillips drive Flanged pan head INCLUDES: (6) Screws SPECS: Diameter: 3mm Length: 8mm  

FEATURES: The collars are made of aluminum The set screws are made of durable metal INCLUDES: (2) screw collars (2) 3mm set screws

FEATURES: stainless steel construction phillips drive replacement screws used on the Traxxas LS-II INCLUDES: (6) Screws SPECS: Size: 3x12mm COMMENTS: when screwed-in the head of the screw is usually...

FEATURES: Metal construction Countersunk (flat head) machine screws Phillips drive insert Replacement parts designed for the Traxxas Nitro Hawk INCLUDES: Six Screws SPECS: Length: 10mm Diameter: 3mm

FEATURES Plastic constructionPrewired On/Off switch   INCLUDES 4-Cell AA Battery Holder with On/Off Switch

.

INCLUDES: 2 pieces of fuel tubing. SPECIFICATIONS:  Length: each piece is 6" long Inside diameter: 2mm

FEATURES: Aluminum construction Anodized Red INCLUDES: Two assembled turnbuckles REQUIRES: Installation, 5mm Wrench

FEATURES: Aluminum construction Anodized Blue INCLUDES: Two assembled turnbuckles REQUIRES: Installation, 5mm Wrench

Electronic Speed Control, LaTrax®, waterproof (assembled with bullet connectors)Replacement part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Teton

FEATURES: Nylon construction Black in color INCLUDES: One 4 cell AA Battery Holder w/Futaba Connector REQUIRES: Assembly onto Vehicle

This high quality five-cell receiver battery pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1-2 hours of run time. Heavy-duty wiring provides...

.

.

.

FEATURES Connects receiver batteries to chargers with molex output connector   INCLUDES Molex to Receiver Pack Charge Adapter   SPECIFICATIONS Length: 2.8" (71mm) not...

XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)

Battery/charger completer pack (includes #2969 2-amp NiMH peak detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH battery (1))   Traxxas 7-Cell NiMH battery and 2-Amp AC charger for...

This is the Traxxas DC Powered 2 Amp NiMH Battery Charger. FEATURES Charges 5-6 cell, 6.0-7.2V NiMH batteries only (will not charge LiPos) LED...

  This is the Traxxas AC Powered EZ-Peak Plus Battery Charger with iD Auto Battery Identification. FEATURES Charges 2-3S LiPo...

Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)

FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings MAXX...

FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers...

This is the Traxxas 7-Cell 8.4V 4200mAh 4 Series iD Power Cell NiMH Stick Battery Pack. FEATURES New high current connector with gold-plated...

This is the Traxxas 6-Cell 7.2V 3300mAh iD Power Cell NiMH Stick Battery Pack. FEATURES New high current connector with gold-plated copper...

Adapter, Traxxas iD LiPo battery (adapts Traxxas iD batteries to separate balance ports) Traxxas Balance Lead Adapter enables customers to connect their Traxxas iD batteries to accessory cell...

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

This is the Traxxas Power Cell iD 7.4V 5800mAh 25C 2S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

Features: Grey right and left rear suspension arm mounts These are +/-1° SPECS: Thickness: .23" (6mm) Height: 1.22" (31mm) Width: .82" (21mm)

Features: 2 white dyeable nylon susp. arm mounts These are +1° or -1° degrees You can flip them around for either setting . Optional: Traxxas has 0° degree blocks Part #6797

Features: 2 white dyeable nylon susp. arm mounts These are 0° degrees Optional: Traxxas has +1°/-1° degree blocks part #6798

Fits Continued: 1/10 Nitro Stampede / Nitro Rustler Includes: 2- Chrome plated Rear shock shafts.

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler INCLUDES: 4- stub axle pins

FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS: Length: 1.65" (42mm) Diameter: .51" (13mm) at largest point

INCLUDES:   6- internal splined shafts(female universals)  6- external splined shafts(male universals) REQUIRES: Does not include the metal u-joint balls and pins.

Fits Continued: 1/10 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler / T-Maxx Classic Kit includes: 6ea 5.8mm metal balls 6ea 5.8mm white nylon ball ends

PACKAGE INCLUDES: 48mm Rear inner hinge pin (2) 31.5mm Front and rear outer hinge pin (4) 39mm Front inner hinge pin (2) 23mm Pins ("king pins") for the steering blocks (or "knuckle arms") (2) 3mm...

.

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash  / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE INCLUDES: 2-Bearings SPECS: 5x8x2...

FEATURES: Steel construction, silver in color INCLUDES: Six 3x12mm Roundheaded Self Tapping Screws SPECS: Length: 12mm Diameter: 3mm  

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE INCLUDES: 1-Spring Retainers 2-Spring Adjustors 4-Spring...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE CONTAINS: 2-Caps FEATURES: Round aluminum caps with threaded inside COMMENTS: Rubber...