Traxxas

.

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 55mm (75mm center to center) turnbuckles with instruction sheet REQUIRES: Installation on the...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two front 47mm (67mm center to center) turnbuckles REQUIRES: Installation on the vehicle

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two rear 36mm (56mm center to center) turnbuckles REQUIRES: Installation on the vehicle

This is the Camber Link Set in Gray for the 1/10 scale Traxxas Bandit. FEATURES Plastic construction, gray in color Non-adjustable ...

FEATURES: Black plastic camber links Two 2.56" (65mm) Two 3" (76mm) INCLUDES: Four camber links REQUIRES: Traxxas bandit SPECS: Thickness: 4mm COMMENTS: Camber links is another name for tie-rods.

FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts. SPECS: Length: 0.94" (24mm)...

.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

.

Fits Continued: 1/10 Nitro Rustler FEATURES: All these gears and shafts are made of metal(probably with a low amount of steel). INCLUDES: 4- planetary gears 4- planteary gear shafts 2- sun gears 1-...

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic This is a shock rebuild kit for 2 Traxxas black plastic shocks...

.

FEATURES: Steel construction (silver color) INCLUDES: Two (2) turnbuckles REQUIRES: Rod ends (4742) SPECS: Length: 82.4mm Diameter: 3mm

FEATURES: Aluminum Construction Anodized blue INCLUDES: (2) Assembled Turnbuckles REQUIRES: Installation onto Stampede 5mm Wrench SPECS: Length: 2.4" (61mm)

FEATURES: Steel construction Adjustable without removing from vehicle INCLUDES: Two 78mm turnbuckles for the Traxxas T-Maxx REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 78mm...

.

PACKAGE INCLUDES: Two 50mm turnbuckles. COMMENTS: Plastic rod ends are NOT included, use Traxxas part #4742 The turnbuckles have a molded in nut to make adjustments simple Uses a 5mm wrench for...

This is the Gear Set for the Steering Servo used on the Traxxas X-Maxx Monster Truck     FEATURES Replaces worn or broken...

Waterproof Metal Gear Digital Servo • Metal Gear, Ball Bearing • Digital High-torque 125 oz-in.  • Transit Time .17 sec/60°  • L=55mm, H= 42.75mm, W=21.5mm

FEATURES: Three piece plastic case molded in blue and black color Replaces worn or damaged servo cases and gaskets INCLUDES: One Upper Case (blue plastic) One Middle Case (blue plastic) One Lower...

FEATURES: Ball bearings Black plastic construction INCLUDES: One digital high torque ball bearing servo SPECS: Ratings such as speed and torque have not been provided by Traxxas. Length: 2.16" (55mm)...

FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS: Length: 1.6" (40.5mm) Width: .8" (20.5mm) Height: 1.43"...

.

FEATURES: Machined aluminum 30T idler gear Hard anodized INCLUDES: One Auminum Idler Gear REQUIRES: Two 5 x 11mm bearings (DTXC1547) One #3195X top drive gear (TRAC3296) COMMENTS: This idler gear is...

PACKAGE INCLUDES: One 30 tooth idler gear

.

Features: White plastic parts Includes: (6) sets of drive shafts (each set consists of an inside shaft wich slides in the outside shaft). Dimensions: 2.5" long when fully compressed. Requires:...

Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)Accessory part for these models:Ford Fiesta® ST RallyNitro RustlerNitro SlashRustler® 4X4 VXLSlash 4X4 UltimateSlash 4X4 VXLStampede®...

Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)Accessory part for these models:Ford Fiesta® ST RallyRustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash...

Traxxas aluminum stub axle carriers add both strength and beauty without compromising the track-bred suspension geometry. Complete installation kit includes hardened-steel hingepins and e-clips...

FEATURES: Steel construction Constant velocity design Fully assembled INCLUDES: Two Steel Spline Rear Driveshafts

Includes: 2 white nylon telescoping shaft (each shaft is made of two pieces) 4 aluminum U-joints

Includes: 2ea 24X3mm pins 4ea 31.5X3mm pins 2ea 40X3mm pins 2ea 48X3mm pins 10ea 3mm e-clips

Includes: 2- 54mm threaded turnbuckles w/nut for easy adjustment. 2- 3x6,4.0mm thick aluminum spacers Comment: The spacers are for spacing the ball end away from the transmission bulkhead.

Includes: 2- 36mm threaded turnbuckles w/nut for easy adjustment. 2- 2x6,2.5mm thick aluminum spacers Comment: The spacers are for spacing the ball end away from the transmission bulkhead.

.

Fits Continued: 1/10 Nitro Stampede / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler / T-Maxx Classic FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS: Length: aprrox. 7/8"

.

Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)Accessory part for these models:Bandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed ReplicaCraniac®DCB M41...

This Package Includes: (2) 3X45mm Screw pins (2) 3X35mm Screw pins (2) 3X30mm Screw pins (2) 3X27mm Screw pins (2) 3X20mm Screw pins Screw Pins are "hinges" for the suspension arms. These are almost...

Features: Made of fiber Black in color Wears better than metal Includes: (6) small washers (6) large washers Specifications: Small Large Outer Diameter 8mm 10mm Inner Diameter 5mm 5mm

Fits Continued: 1/10 Nitro Rustler INCLUDES: 14 bushings SPECS: 5x11mm bushings COMMENTS: These bushings would work on any vehicle using 5x11mm bushings.

These hardened, ground steel shafts have a super tough titanium nitride coating with a micro-polished finish that reduces stiction for smoother performance and resists scratching for much longer...

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler Includes: 2- front shock shafts.

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Blue aluminum construction INCLUDES: Two hex hubs Four axle pins REQUIRES: Assembly onto axles. SPECS: Hex...

Features: White plastic half shafts with universal joint ends Metal universal joints Includes: (2) inside shafts (2) outside shafts (4) universal joints (metal balls with 4 pins sticking out in a...

INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

This is an optional Traxxas "short" RPM Sensor. To collect critical RPM data (Revolutions Per Minute), a "trigger magnet" is installed in the spur gear of electric models, or the flywheel of nitro...

FEATURES: Allows wheelbase adjustment depending on track conditions and driver preference Forward pivot ball holes increase wheelbase 0.39" (10mm) and rearward pivot ball holes increase wheelbase 0...

.

FEATURES: Red anodized aluminum construction INCLUDES: Eight 4x6x3mm spacers REQUIRES: Nothing. These are direct fit parts.  

Replace your non-adjustable camber links with these 49 mm (82 mm center to center) metal turnbuckles for trackside camber adjustment. Comes assembled with rod ends and hollow balls.

.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

These are replacement LED Lens for the LaTrax Alias Quad-Copter Includes: 4 x LED Lens

These are replacement LED Lens for the LaTrax Alias Quad-Copter Includes: 4 x LED Lens

This is the replacement (backup) battery for the Traxxas / LaTrax Alias Quad Copter. Specifications: Cell count: 1S 3.7V mAh: 650mAh Features: This is the same as the stock battery included with your...

This is a pair of replacement blades for the LaTrax Alias. Includes: 2 x Rotor Blade 2 x 1.6x5mm BCS

This is a pair of replacement blades for the LaTrax Alias. Includes: 2 x Rotor Blade 2 x 1.6x5mm BCS

This is a Traxxas Electric Motor Temperature Sensor Mount. NOTE: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with...

This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critical to monitoring performance, gauging the effects of...

Traxxas 2-Channel TQ 2.4GHz Transmitter. **This transmitter is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** FEATURES: Replacement transmitter for...

FEATURES: Certified for use with the Traxxas XO-1 on road car Withstands centrifugal forces at speeds in excess of 100mph Cyanoacrylate (CA) type glue Sealing pin designed into cap prevents...

FEATURES: Strong aluminum construction, coated          Anodized black with white springs          Completely...

  

FEATURES: Black nylon constructionINCLUDES: One Battery Hold Down          One Retainer Hold Down         ...

This is the Traxxas 775 Titan Motor.FEATURES: Five-pole armature for superior torque and smoothness         ...

Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out. The inner and outer U-joints are...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

This is the Traxxas 17 Tooth 32 Pitch Pinion Gear. FEATURES Hardened steel construction 0.8 metric pitch, compatible with 32 pitch...

ProGraphix Custom bodies are painted with the same hot, clean graphics as our regular ProGraphix bodies, however the overall color is left clear, leaving the final coat and color choice to you! We...

This is an optional Traxxas CV Driveshaft Set, and is intended for use with the Traxxas T-Maxx 3.3, Revo 3.3, E-Maxx and E-Revo trucks. Traxxas Steel Constant Velocity Driveshafts are designed to...

This is the Piston and Sleeve for the Traxxas TRX 3.3 engines.FEATURES: ABC construction, (A)luminum piston mated to a (B)rass...

The formula for Traxxas air filter oil is specially made for filtration, not lubrication. It's extra-sticky to trap extremely small particles of dust and dirt in the foam element. Traxxas air filter...

This is the Connecting Rod for the Traxxas 2.5 and 3.3 Engine.               This part connects the piston to the crankshaft...

FEATURES: Three bottles of oil (10K,30K,50K weights).INCLUDES: Three 2oz (59ml) bottles of oil          Three pour spouts

10K wt Differential Oil for the Traxxas Revo but can be used in other vehicles as well. FEATURES: 10K wt oil INCLUDES: A 1.75 oz (50cc) bottle of oil w/ 1-1/2" pointed fill cap

100K Weight Differential Oil for the Traxxas Revo                 but can be used in other vehicles as well.FEATURES:...

500K Weight Differential Oil from Traxxas.FEATURES: Lubricates differential          Clear in color         ...

FEATURES: Satin chrome finish wheels          12mm hex mount          Slick rubber tiresINCLUDES: Four wheels...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

.

Gearbox housing/ motor plate

.

.

FEATURES: Polished spokes with red chrome finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS: Width: 0.70" (17.8mm) Diameter: 1.7" (43mm) Hex Size 7mm

FEATURES: Polished spokes with blue chrome finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS: Width: 0.70" (17.8mm) Diameter: 1.7" (43mm) Hex Size 7mm

FEATURES: Polished spokes with black chrome finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS: Width: 0.70" (17.8mm) Diameter: 1.7" (43mm) Hex Size 7mm

FEATURES: Polished spokes with blue finish Premounted slick rubber tires INCLUDES: Two Tires and wheels SPECS: Width: 0.70" (17.8mm) Diameter: 1.7" (43mm) Hex Size 7mm

FEATURES: 12 spoke plastic rally wheels, white in color Premounted slick rubber tires INCLUDES: Two Tires and Wheels for the Traxxas Latrax Rally Car SPECS: Width: 0.69" (17.5mm) Diameter: 1.7"...

FEATURES: Plastic construction white in color INCLUDES: Two 12-Spoke Wheels

FEATURES: Made of black rubber INCLUDES: Two tires SPECS: Diameter, outer: 1-11/16" (43mm) inner: 6mm (1/4") Width: 18mm (11/16")

.