Traxxas

Transmission gears, single speed, metal

Pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x11 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))

.

.

Includes Main Housing, Front housing, & Cover

2-speed/ shift dog/ shift fork/ shaft seal/ 2-speed linkage

.

.

.

.

Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ screw pin (4)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical...

.

Wheels, Tactical 1.9 (2) Replacement part for these models: TRX-4 Tactical Unit

Body, GTS Shock, Aluminum Anodized (1) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

Body, GTS Shock, Aluminum Anodized (1) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

Shock shaft, 3x47mm (GTS) (titanium nitride-coated) (2) TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit  

.

.

.

.

.

.

.

.

.

Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone greaseAccessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Equipped with...

.

.

.

.

Body, Tactical Unit, night camo (painted)/ decals for TRX-4 Tactical Unit  

.

Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit  

Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe) (2) Accessory part for these models: TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit  

.

.

Mounting Bracket / Screw Pins (2)

.

.

Grill, Land Rover Defender/ grill mount (3)/ headlight housing (2)/ lens (2)/ headlight mount (2) (fits #8011 body)

.

 

 

 

 

 

 

 

 

  This is the Slipper Clutch Rebuild Kit for the Traxxas X-Maxx Monster Truck       FEATURES Restores like-new performance...

This is the Slipper Pressure Plate and Hub for the Traxxas X-Maxx Monster Truck     FEATURES Cast metal construction Installs on...

.

Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

FEATURES Steel and aluminum construction   INCLUDES Two each; Shafts and Aluminum...

FEATURES Hardened steel construction   INCLUDES Two Output Gears Four Spider Gears Two...

Aluminum differential carrier for X-Maxx. Compatible with Torque-Biasing Center Drive™ and front and rear differentials. Requires #7783X spider gear shaft.

FEATURES Molded composite plastic construction   INCLUDES Differential Carrier Two X-Ring...

FEATURES Molded composite plastic construction Fastens to front and rear bulkheads and protects differential assembly from dirt   ...

FEATURES Hardened steel construction Fits front and rear differentials   INCLUDES Ring Gear

FEATURES Hardened steel construction   INCLUDES Pinion Gear for Rear Differential

X-Maxx red-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft (#7750X) only.

Stub axle, aluminum (green-anodized) (1) (use only with #7750X driveshaft)

X-Maxx blue-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft (#7750X) only.

FEATURES Steel construction   INCLUDES Two Shock Springs   ...

 

FEATURES Aluminum construction, anodized red in color All shock components mount inside or attach to this body   ...

.

Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers (8)

.

FEATURES Molded composite plastic construction Steel ball link inserts in shock caps   INCLUDES ...

.

This is a pair of GTX Shocks for the Traxxas X-Maxx FEATURES Aluminum bodies, anodized color Fully assembled, springs not included ...

Shocks, GTX, aluminum (black-anodized) (fully assembled w/o springs) (2)Accessory part for these models:X-Maxx

This is a pair of GTX Shocks for the Traxxas X-Maxx FEATURES Aluminum bodies, anodized color Fully assembled, springs not included ...

FEATURES Two-piece molded composite plastic construction Attaches to rear bulkhead and fastens to both ends of motor   ...

 

 Washers, motor mount, aluminum (green-anodized) (4)/ 4x18mm BCS (4)

FEATURES Aluminum construction, anodized red in color Threads onto stub axles to hold wheels in place   ...

FEATURES Aluminum construction, anodized green in color Threads onto stub axles to hold wheels in place   ...

Wheel nuts, splined, 17mm, serrated (black-anodized) (4)Accessory part for these models:X-Maxx

FEATURES Aluminum construction, anodized blue in color Threads onto stub axles to hold wheels in place   ...

FEATURES Steel construction Snaps onto groove of each stub axle to hold wheel hub and uprights in place   ...

 

FEATURES Molded composite plastic construction   INCLUDES Two Hex Wheel Hubs Two Steel...

Drive cup (1)/ 3x8mm CS (use only with #7750X driveshaft) X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

Rebuild kit for use with #7750X heavy duty X-Maxx driveshaft. Kit includes pins for 2 driveshaft assemblies.

Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, #7768R, or #7768G) X-Maxx steel constant-velocity driveshaft for...

 

This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball...

FEATURES Molded composite plastic construction   INCLUDES Servo Horn Steering Linkage with...

FEATURES Molded composite plastic construction Steel servo saver spring   INCLUDES Two...

FEATURES Molded composite plastic construction Reduces damage to underside of chassis and other components during chassis bottoming   ...

FEATURES Molded composite plastic construction Reduces damage to underside of chassis and other components during chassis bottoming   ...

FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place   ...

FEATURES Steel construction Fastens bottom of shocks to lower front and rear suspension arms   INCLUDES ...

FEATURES Steel construction Fastens lower rear suspension arms to chassis   INCLUDES Two...

This is the Front or Rear Corner Suspension Pin Set for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction Fastens...

This is the Front Shock Tower for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic construction, dark...

FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   ...