Traxxas

Wheel nuts, splined, 17mm, serrated (black-anodized) (4)Accessory part for these models:X-Maxx

FEATURES Aluminum construction, anodized blue in color Threads onto stub axles to hold wheels in place   ...

FEATURES Steel construction Snaps onto groove of each stub axle to hold wheel hub and uprights in place   ...

 

FEATURES Molded composite plastic construction   INCLUDES Two Hex Wheel Hubs Two Steel...

Drive cup (1)/ 3x8mm CS (use only with #7750X driveshaft) X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

Rebuild kit for use with #7750X heavy duty X-Maxx driveshaft. Kit includes pins for 2 driveshaft assemblies.

Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, #7768R, or #7768G) X-Maxx steel constant-velocity driveshaft for...

 

Toe links, X-Maxx (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) Accessory part for these...

Toe links, X-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) Accessory part for these...

Toe links, X-Maxx (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) Accessory part for these...

This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball...

FEATURES Molded composite plastic construction   INCLUDES Servo Horn Steering Linkage with...

Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)Accessory part for these models:X-Maxx

FEATURES Molded composite plastic construction Steel servo saver spring   INCLUDES Two...

FEATURES Molded composite plastic construction Reduces damage to underside of chassis and other components during chassis bottoming   ...

FEATURES Molded composite plastic construction Reduces damage to underside of chassis and other components during chassis bottoming   ...

FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place   ...

FEATURES Steel construction Fastens bottom of shocks to lower front and rear suspension arms   INCLUDES ...

FEATURES Steel construction Fastens lower rear suspension arms to chassis   INCLUDES Two...

This is the Front or Rear Corner Suspension Pin Set for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction Fastens...

This is the Front Shock Tower for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic construction, dark...

FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   ...

FEATURES Molded composite plastic construction Supports the driveshaft and stub axles, and is held in place by the upper and lower suspension...

FEATURES Molded composite plastic construction Fits lower left front suspension Fastens to lower section of caster block and front lower...

FEATURES Molded composite plastic construction Fits lower right front suspension Fastens to lower section of caster block and front lower...

FEATURES Molded composite plastic construction Fits both front and rear suspension   INCLUDES ...

FEATURES Steel construction Mounts upper and lower bulkhead halves in place   INCLUDES One...

FEATURES Replaces damaged or missing receiver box seal and cushions Silicone grease helps to seal receiver box to chassis   ...

FEATURES One-piece molded composite plastic construction Separate molded compartments for ESC, batteries and more   ...

FEATURES One-piece molded composite plastic construction Holds the steering, differential, skidplate and lower control arm assemblies   ...

FEATURES Molded composite plastic construction with thin foam strip to cushion battery Holds both batteries in place on the top chassis...

Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2) 

    FEATURES One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and...

These are the Front and Rear Body Mounts for the Traxxas X-Maxx Monster Truck     FEATURES One-piece molded composite plastic...

.

X-Maxx tailgate protector, insert, and 3x8mm flathead hardware. Provides additional strength for rear and corners of X-Maxx for added durability.

X-Maxx ProGraphix Body w/ Decal Sheet - Pre-cut  

Body, X-Maxx®, Rock n' Roll (painted, decals applied) (assembled with tailgate protector)

X-Maxx Clear Body w/ Decal Sheet - Pre-cut Requires: Paint

Body reinforcement set (fits #7711 body)Accessory part for these models:X-Maxx

Tires and wheels, assembled, glued (SCT red wheels, SCT off-road racing tires)                                 ...

Tires and wheels, assembled, glued (SCT orange wheels, SCT off-road racing tires)                              (1 each,...

Tires and wheels, assembled, glued (SCT blue wheels, SCT off-road racing tires) (1 each, right & left)Replacement part for these models:1/18 LaTrax Desert PreRunner 

Wheel nut washer, machined aluminum, red / 3x12mm CS (4)

Wheel nut washer, machined aluminum, blue / 3x12mm CS (4)

FEATURES Replaces stock plastic body shocks-more rugged with better stability and handling, and better damping over jumps and bumps PTFE-coated...

.

FEATURES Rebuilds two shocks   INCLUDES Two each, Bladders, Pistons, Shaft Guides, Caps, Rod EndsFour Clips

INCLUDES2 x Shocks, oil-filled (assembled with springs)

.

.

FEATURES Composite plastic constructionTransfers power from differentials to wheels   INCLUDES Two Front or Rear Driveshaft Assemblies

FEATURES Metal constructionStock replacement pinion gear   INCLUDES 10 Tooth Pinion GearSet ScrewTwo 3x4mm Phillips Head ScrewsMetal Plate

.

FEATURES Composite plastic constructionStock replacement spur gear   INCLUDES 60T Spur Gear

FEATURES Molded plastic construction, blue in color   INCLUDES Front and Rear Shock Tower with black plastic Braces

FEATURES Plastic constructionNon-adjustable   INCLUDES Four Camber LinksTwo Toe Links

FEATURES Plastic construction, black in color   INCLUDES Front and Rear Bumpers for the Teton Monster Truck

FEATURES Composite plastic constructionFastens to front or rear bulkheads   INCLUDES Two Front or Rear Suspension Arms

.

Body, LaTrax Desert PreRunner, color burst (painted)/ decalsAccessory part for these models:1/18 LaTrax Desert PreRunner

FEATURES Plastic construction, black in colorInstalls in shock towers and holds front and rear of body in place   INCLUDES Front and Rear Body Mounts for the Teton Monster Truck

FEATURES Clear molded polycarbonate construction Trimmed out wheel arches and body post holes   INCLUDES ...

.

 

Compatible Products Traxxas Pivot Balls, Black 6pc, Silver 2pc: LaTrax TRA7540 is compatible with TRA76054T1, TRA76054T2, TRA76054T3, TRA76054T4

.

FEATURES Replaces worn bellcranks and related components to restore propersteering and control   INCLUDES Two Bellcranks, Servo Saver, Spring, Spring Retainer, Draglink andtwo Posts

This is an optional LaTrax Carbon Fiber Conversion Kit, intended for use with the LaTrax 1/18 Rally Car. This kit includes the carbon fiber chassis, upper chassis, battery hold down, adhesive foam...

Included: 1 x LaTrax Rally Orange Body Painted 1 x LaTrax Rally Decal Sheet

Plate, motor, redAccessory part for these models:Rustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 Ultimate

Plate, motor, greenAccessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4Ford Fiesta® ST Rally

Plate, motor, orangeAccessory part for these models:Rustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 Ultimate

FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Motor Plate  

FEATURES: Made of black plastic. INCLUDES: One cover gear One wire retainer

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

FEATURES: Tread pattern designed for use in gravel Twelve spoke design, white in color INCLUDES: Two Rally Gravel Pattern Short Course Tires with Foam Inserts and Wheels SPECS: Diameter: 4.26"...

This is a pack of two replacement Traxxas Green Wheels, and are intended for use with the Traxxas 1/10 Rally Racer. These wheels can be used in the front or rear of the vehicle.

.

FEATURES: Tread pattern designed for use in gravel Rubber construction INCLUDES: Two Rally Gravel Pattern Short Course Tires with Foam Inserts REQUIRES: Short Course truck wheels Tire Glue SPECS:...

Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))Replacement part for these models:Slash 4X4 UltimateUnlimited Desert...

.

Body, GTR xx-long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler 4X4 VXL

.

.

FEATURES Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES Two XX-Long Traxxas GTR Shocks Bottle of Silicone Shock...

Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these...

FEATURES Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES Two Long Traxxas GTR Shocks Bottle of Silicone Shock...

Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 1.004 Blue Compression Rate. FEATURES Steel construction, white...