Traxxas

Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shafts (2)/ spacers (4))Replacement part for these models:Sledge™

Carrier, differential/ differential bushing (metal)/ o-rings (2)/ ring gear gasketReplacement part for these models:Sledge

Ring gear, differential/ pinion gear, differentialReplacement part for these models:Sledge™

9576X Wheelie Bar Assembled Blue : Sledge

9576T Wheelie Bar Assembled Orange : Sledge

9576R Wheelie Bar Assembled Red : Sledge

Wheelie bar, green (assembled)/ 3x20 CS (8)The Sledge® wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also...

Wheelie bar, black (assembled)/ 3x20 CS (8)The Sledge® wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also...

Tires & wheels, assembled, glued (3.8" black chrome wheels, belted Sledgehammer® tires, foam inserts) (2)Belted Sledgehammer® tires deliver game-changing stability and control whether you’re...

Give your Sledge® the ultimate driveline upgrade with these hardened steel front stub axles. Built for maximum strength and durability, these stub axles are a standard replacement for upgraded 9655X...

Driveshaft, steel constant-velocity (assembled), front (1)Replacement part for these models:Sledge™

Toe links, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and style to...

Toe links, Sledge® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and style to your...

Toe links, Sledge® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and style to...

Toe links, Sledge® (TUBES dark titanium-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and...

Toe links, front (120mm) (2) (assembled with hollow balls)Replacement part for these models:Sledge™

Camber links, rear, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and...

Camber links, rear, Sledge™ (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and...

Camber links, rear, Sledge™ (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and...

Camber links, front, Sledge® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and...

Camber links, front, Sledge® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (117mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 8mm (1)Add strength and...

Camber links, front (117mm) (2) (assembled with hollow balls)Replacement part for these models:Sledge

Servo horn, steering, metalReplacement part for these models:Sledge™

Suspension pins, outer, front, 3.5x48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)Replacement part for these models:Sledge™

Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)Replacement part for these models:Sledge

Shock tower, front, 6061-T6 aluminum Replacement part for these models:Sledge

Steering blocks, left & right/ M4x0.7 NL (4)Replacement part for these models:Sledge™

Suspension arm, rear (left)Replacement part for these models:Sledge

Suspension arm, rear (right)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Suspension arm, front (left)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Suspension arm, front (right)Replacement part for these models:Sledge

Tie bars, front, 6061-T6 aluminum (green-anodized)Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.Accessory part for these models:Sledge®

Steering link (30mm) (1)/ hollow balls (2)Replacement part for these models:Sledge™

Bellcrank posts, steering (aluminum, blue-anodized)Replacement part for these models:Sledge™

Side guards, chassis (left and right)/ 3x8 CCS (10)Replacement part for these models:Sledge

Chassis, Sledge®, aluminum (green-anodized)Give your Sledge® a bold new look with this green-anodized aluminum chassis.Accessory part for these models:Sledge®

Chassis, Sledge®, aluminum (dark titanium-anodized)Give your Sledge® a bold new look with this dark titanium gray anodized aluminum chassis.Accessory part for these models:Sledge®

Chassis, aluminum (blue-anodized)Replacement part for these models:Sledge™

Mud guards, rear (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)Replacement part for these models:Sledge

Mud guards, rear (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2)Replacement part for these models:Sledge

Wing/ wing washer/ 4x12mm FCS (2)Replacement part for these models:Sledge

Wing/ wing washer/ 4x12mm FCS (2)Replacement part for these models:Sledge

Wing/ wing washer/ 4x12mm FCS (2)Replacement part for these models:Sledge

Wing/ wing washer/ 4x12mm FCS (2)Replacement part for these models:Sledge

Wing/ wing washer/ 4x12mm FCS (2)Replacement part for these models:Sledge

Body, Sledge™, red/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Replacement part for these models:Sledge™

Body reinforcement set, blue/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge™

Body reinforcement set, red/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge™

Body reinforcement set, green/ skid pads (roof) (fits #9511 body)Accessory part for these models:Sledge™

Body reinforcement set, black/ skid pads (roof) (fits #9511 body)Replacement part for these models:Sledge™

Display stand, Drag SlashDisplay your Drag Slash and prevent flat-spotted tires with this Display Stand. The stand keeps the tires at ride height to give your Drag Slash the proper stance while on...

Pro Series Magnum 272R™ TransmissionUpgrade Your Bandit, Rustler, Stampede, or Slash with the Toughest Transmission AvailablePro Series Magnum 272R Transmission (9495A)A New Generation of...

Gearbox halves, left & right/ differential cover (charcoal gray)Replacement part for these models:Drag Slash

A rubber plug allows you to adjust your clutch tension without removing the transmission gear cover. Includes transmisison gear cover, plug, and screws.Replacement part for these models:Bandit®...

9488X Stainless Steel Hardware Kit for VXL Slash / Bandit / Stampede & Rustler

9488 Replacement Hardware Kit for VXL Slash / Bandit / Stampede & Rustler

Differential gasket/ x-rings (2)Replacement part for these models:Drag Slash

This pre-assembled differential is ready-to-install in any Magnum 272R transmission. The sealed differential comes filled with grease for smooth hard-charging action. The differential will also...

Tires & wheels, assembled, glued (Weld chrome with black wheels, Mickey Thompson Drag Slicks, sticky compound, foam inserts) (rear) (2)Sticky Compound Mickey Thompson ET Drag Slicks provide...

Tires & wheels, assembled, glued (Weld chrome with black wheels, tires, foam inserts) (rear) (2)Wide Mickey Thompson drag slicks come pre-glued to black & chrome Weld wheels to replicate the...

Tires & wheels, assembled, glued (Weld gloss black wheels, tires, foam inserts) (rear) (2)Wide Mickey Thompson drag slicks come pre-glued to gloss black Weld wheels to replicate the legendary...

Tires & wheels, assembled, glued (Weld satin black chrome wheels, tires, foam inserts) (front) (2)Mickey Thompson skinny front drag tires come pre-glued to satin black Weld wheels to replicate...

Tires & wheels, assembled, glued (Weld gloss black wheels, tires, foam inserts) (front) (2)Mickey Thompson skinny front drag tires come pre-glued to gloss black Weld wheels to replicate the...

Wheels, Weld chrome with black (rear) (2)Accessory part for these models:Drag Slash

Aluminum Side Plates Wheelie Bar Blue (2)Accessory part for these models:Drag Slash

Aluminum Side Plates Wheelie Bar Orange (2)Accessory part for these models:Drag Slash

Wheels, wheelie bar, 6061-T6 aluminum (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW (2)Accessory part for these models:Bandit® VXLRustler® VXLStampede® VXL

Wheels, wheelie bar, 6061-T6 aluminum (red-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW (2)Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching...

Wheels, wheelie bar, 6061-T6 aluminum (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW (2)Accessory part for these models:Bandit® VXLRustler® VXLStampede® VXL

Wheels, wheelie bar, 6061-T6 aluminum (green-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW (2)Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching...

Wheelie bar, black chrome (assembled)/ wheelie bar mountAccessory part for these models:Drag Slash

Wheelie bar, black (assembled)/ wheelie bar mountDeveloped for the Drag Slash, this extra-long wheelie bar features 5 height positions and two wheel sizes for maximum customization. Two heavy-duty...

Foam Body Bumper 

Suspension arms, black, rear (left & right), heavy duty, 1° toe angle (2)These suspension arms are made from our toughest heavy-duty composite material with just the right amount of flex to...

Suspension arms, black, rear (left & right), heavy duty, 0° toe angle (2)These suspension arms are made from our toughest heavy-duty composite material with just the right amount of flex to...

Mirrors, side (left & right)/ o-rings (4)/ body clips (4) (fits #9421 body)

Body bumper, foamReplacement part for these models:Drag Slash

Body accessories, Chevrolet C10, black chrome (includes grille (upper & lower), headlight housings (left & right), bumpers (front & rear), mounting retainers and hardware)Customize your...

Body accessories, Chevrolet C10, chrome (includes grille (upper & lower), headlight housings (left & right), bumpers (front & rear), mounting retainers and hardware)Customize your Drag...

Body accessories, Chevrolet C10, satin black chrome (includes grille (upper & lower), headlight housings (left & right), bumpers (front & rear), mounting retainers and hardware)Customize...

Tires and wheels, assembled, glued (multi-spoke black wheels, 2.0" ultra-wide slick tires, foam inserts) (front) (2)Replacement part for these models:Toyota® GR Supra GT4®

Tires and wheels, assembled, glued (black with chrome wheels, 2.1" Response tires) (extra wide, rear) (2)Replacement part for these models:Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod Truck

Tires and wheels, assembled, glued (black with chrome wheels, 2.1" Response tires) (front) (2)Replacement part for these models:Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod Truck

Tires and wheels, assembled, glued (split-spoke black chrome wheels, 2.1" Response tires) (extra wide, rear) (2)Replacement part for these models:Chevrolet® Corvette® Stingray

Shocks, GTR composite, front or rear (assembled, without springs) (2)1/16 scale GTR shocks provide superior damping performance and control with a threaded body and adjustable spring collar for easy...

Body mount, rear/ 3x10 FCS (2) (for clipless body mounting) (attaches to #9340 body)Replacement part for these models:Toyota® GR Supra GT4®

Battery hold-down/ battery clip/ hold-down post/ foam spacer/ screw pin (fits #9345 chassis)Replacement part for these models:Toyota® GR Supra GT4®

Wing/ 2.6x8mm BCS (4)Replacement part for these models:Toyota® GR Supra GT4®

Grille, Toyota Supra GT4 (center, left, right)/ splitter/ 2.6x8mm BCS (6)Replacement part for these models:Toyota® GR Supra GT4®

Body, Toyota Supra GT4 (clear, trimmed, requires painting)/ decal sheet (includes side mirrors, wing, grilles, vents, hardware, & clipless mounting)From mild to wild, Traxxas clear bodies are...

Side mirrors (left & right)/ mounts (2)/ tail light lens (2)/ retainers (2)/ 1.6x7 BCS (self-tapping) (6) (fits #9333 or 9335 body)Replacement part for these models:Factory Five '33 Hot Rod...

Body post, rear/ body washers, foam (2)/ pivot (2)Replacement part for these models:Factory Five '33 Hot Rod Coupe

Skidplate, front/ servo mounts, steering (2)Replacement part for these models:Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod Truck

Bumper, front/ bumper mount/ splitter/ bumper foamReplacement part for these models:Chevrolet® Corvette® Stingray

Body mount, rear (for clipless body mounting)Replacement part for these models:Chevrolet® Corvette® Stingray

Body, Chevrolet Corvette Stingray (clear, trimmed, requires painting)/ decal sheet (includes side mirrors, spoiler, grilles, vents, hardware, & clipless mounting)From mild to wild, Traxxas clear...

Fenders, inner, front & rear (for clipless body mounting) (2 each)/ rock light covers (8)Replacement part for these models:TRX-4® Chevrolet® K10 High Trail Edition™