Traxxas

FEATURES: Black plastic with mounting screws INCLUDES: Rear bumper Rear bumper mount REQUIRES: Installation on truck SPECS: Length: Mount: 3.25" (83mm) Bumper: 7" (178mm)

FEATURES: Black plastic with mounting hardware INCLUDES: Front bumper Front bumper mount REQUIRES: Installation on truck SPECS: Length: Bumper: 7" (178mm) Mount: 3" (78mm)

FEATURES: Nylon construction Black in color INCLUDES: One Rear Bulkhead (left and right halves) REQUIRES: Installation on the vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Front Bulkhead (Left and Right Halves) REQUIRES: Installation on the vehicle

FEATURES: Nylon construction Black in color INCLUDES: One ESC Mounting Plate Two 3x35mm Cap Head Screws Foam Padding REQUIRES: Use with Castle Creations Mamba ESC

FEATURES: Prevents moisture and dirt from entering receiver box INCLUDES: Silicone rectangle shaped O-ring Silicone grease, TRAC6037 Two sections of foam rubber Instruction sheet REQUIRES: Installing...

FEATURES: Nylon construction Installed foam pads Grey in color Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor modification INCLUDES: One Chassis with foam pads Instruction sheet...

FEATURES: Nylon construction Black in color INCLUDES: Front and Rear Body Mount Posts REQUIRES: Installation on the vehicle

FEATURES: Direct drop-in for E-Revo and E-Maxx Transfers power to the front and rear differentials independently Comes assembled with 500K oil For single speed transmission only INCLUDES: One...

FEATURES: Red anodized aluminum construction Black pre-attached ball links INCLUDES: One aluminum link SPECS: Length: 4.1" (105mm) including turnbuckles Diameter: 0.17" (4.3mm) Width: 0.39" (10mm) @...

FEATURES: Optional part used to convert the 2-speed transmission to a single speed 20/31T single speed primary gear INCLUDES: One single speed top shaft One single speed primary gear(20/30T) One 5mm...

FEATURES: Nylon construction Black in color INCLUDES: One Left Gearbox Half One Right Gearbox Half REQUIRES: Assembly onto Vehicle

FEATURES: Optional part Steel sway bar construction Mouting hardware included INCLUDES: One front 1.3mm diameter sway bar One front 1.5mm diameter sway bar One rear 1.5mm diameter sway bar One rear 1...

FEATURES: Black plastic construction One inch wheels INCLUDES: One assembled wheelie bar Four 4X6mm Button Cap Screws REQUIRES: The Jato model 5510 requires installation of batt box part #5515X which...

FEATURES: Steel construction Black in color INCLUDES: Two Differential Output Gears Two Spider Gears Two Spider Gear Shafts REQUIRES: Assembly onto Vehicle

FEATURES: Rubber construction Black and Blue in color INCLUDES: Two Transmission Gasket One Differential Gasket One L-Shaped Foam Strip REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Differential Cover REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Differential Gear 38T One Differential Side Cover One Differential Gasket Two Output Gear Seals Four 2.5mm x 8mm Countersunk Socket Head...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are available separately or mounted and pre-glued...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design is available with a brilliant mirror-chrome or black-chrome...

 Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic All-Star...

 All-Star wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design is available with a brilliant mirror-chrome or black-chrome...

 Twin-Spoke wheels redefine looks and convention by combining structural strength and futuristic stylings. The state-of-the-art design features a brilliant mirror-chrome face and a natural nylon...

FEATURES: Chrome color twin spoke wheels Alias 2.8" tires pre-mounted and glued with foam inserts 12mm hex INCLUDES: Two chrome rear wheels and tires for the Jato SPECS: Wheel: Outer Diameter: 3.08"...

FEATURES: Nylon construction Black in color INCLUDES: One Brake Came Lever One Linkage Brake Bellcrank One Brake Bellcrank Rod REQUIRES: Assembly onto Vehicle

FEATURES: Metal Construction Black in color INCLUDES: One Input Shaft (Slipper Shaft) One Slipper Shaft Spacer REQUIRES: Assembly onto Vehicle

FEATURES: Installs on either side of brake disc INCLUDES: Two aluminum brake pads, two 3x15mm socket head screws, C clip, pin, hub and spacer REQUIRES: Installing on brake assembly

FEATURES: Composite construction Grey in color INCLUDES: One Composite Brake Disc REQUIRES: Assembly onto Vehicle  

FEATURES: Factory assembled for front installation on the Jato (1.4mm piston), for rear use, the installed pistons must be replaced with included 1.3mm rear pistons INCLUDES: Two GTR Composite...

FEATURES: Metal construction Silver in Color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x 15mm Socket Head Screws w/Washers Two 4mm x 18mm Button Head Screws Two 3mm x 10mm...

FEATURES: Aluminum Construction Blue in Color INCLUDES: One 4° F/R Suspension Tie Bar One F/R Suspension Tie Bar REQUIRES: Assembly onto Vehicle

FEATURES: Aluminum Construction Blue in Color INCLUDES: One 5° Rear Suspension Tie Bar One 3° Rear Suspension Tie Bar REQUIRES: Assembly onto Vehicle

FEATURES: Pot Metal Construction Silver in Color INCLUDES: One Slipper Press Plate One Slipper Press Plate Hub REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Left Rear Stub Axle Carrier One Right Rear Stub Axle Carrier REQUIRES: Assembly onto Vehicle

FEATURES: Metal and nylon construction Black in color INCLUDES: Two Metal Rear Stub Axles w/Nylon Yokes installed REQUIRES: Assembly onto Vehicle

FEATURES: Fully assembled and ready to install, left or right application INCLUDES: One Driveshaft Assembly with 3x12.5mm screw pin REQUIRES: Installing between gearbox and stub axle carriers SPECS:...

FEATURES: Direct replacement parts Rubber sealed boots Fully assembled INCLUDES: Two assembled half shafts REQUIRES: Installation on Jato SPECS: Length: 3.19" (81.01mm) Diameter: .454"(11...

FEATURES: Direct replacement tank Clear nylon construction with spring loaded lid Pre-installed pressure fittings Tank lid has a pull ring for easier refuelling INCLUDES: One replacement complete...

FEATURES: Nylon and Metal construction Black in color INCLUDES: One 3mm x 30mm Threaded Rod Two 3mm Ball Cups Two 3mm Hollow Balls One Nylon Steering Servo Horn REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Gray in color INCLUDES: One Left and Right Steering Bellcrank One Servo Saver One Servo Saver Spring Two Steering Supports Four 4mm x 7mm x 2.5mm Plastic...

FEATURES: Aluminum Construction Anodized Blue in Color INCLUDES: One Drag Link w/Pre-Installed Bearings Four 5mm x 8mm Washers REQUIRES: Assembly onto Vehicle

.

Turnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and hollow balls)/ aluminum 5mm wrench (red-anodized)Traxxas’ aluminum turnbuckles...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends Can be Used on Front or Rear INCLUDES: Two 58mm Threaded Rods Four 3mm Ball Ends Four 3mm Hollow Balls REQUIRES:...

FEATURES: Metal and Nylon Construction Black and Silver in Color Assembled w/Rod Ends INCLUDES: Two 61mm Front Tie Rods Four Rod Ends Four Hollow Balls REQUIRES: Assembly onto Vehicle

FEATURES: Blue anodized 7075 T-6 aluminum construction. INCLUDES: Two spindles (left and right). SPECS: Length: 1-1/4" (32mm) Diameter: 1/4" (6mm)

FEATURES: Metal construction Black in color INCLUDES: One Left Front Wheel Spindle One Right Front Wheel Spindle REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Left and Right 30° Caster Blocks One Left and Right 30° Steering Blocks REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Left Front Suspension Arm One Right Front Suspension Arm REQUIRES: Assembly onto Vehicle

FEATURES: Nylon Construction Black in Color INCLUDES: One Front Upper Bulkhead One Front Lower Bulkhead REQUIRES: Assembly onto vehicle

FEATURES: Metal construction Silver in color For Adjusting Roll Center INCLUDES: Four Silver Metal Hollow Balls Four 3mm Silver Washers REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: Two Differential Output Yokes Two 2.6mm Set Screw Pins REQUIRES: Assembly onto Vehicle

FEATURES: Anodized red aluminum crimp nut INCLUDES: One Crimp Nut Nylon wrench

FEATURES: Anodized Blue Aluminum crimp nut INCLUDES: One crimping nut Nylon wrench

FEATURES: Heavy duty plastic construction Black in color INCLUDES: Eight Rod Ends REQUIRES: Threading onto suspension and steering rods SPECS: Length: 31.5mm (1.24") Width at ball joint: 11mm (0.43")

FEATURES: Black nylon construction. Steel hollow balls. INCLUDES: Twelve rod end/balls SPECS: Length: 1-1/8" (28mm) Width: 3/8" (9mm)

FEATURES: Nylon construction, holds receiver and throttle servo Black in color INCLUDES: One Chassis Top Plate. REQUIRES: Assembly onto Vehicle

FEATURES: Constructed of steel, 1/16" (3mm) in diameter Holds suspension arms in place INCLUDES: Four 1.1" (27mm) pins Four 2.04" (52mm) pins Two 1.4" (35mm) pins REQUIRES: Inserting through...

FEATURES: Nylon construction Black in color INCLUDES: One Front Shock Tower REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black incColor INCLUDES: One Rear Shock Tower REQUIRES: Assembly onto Vehicl.

FEATURES: Nylon construction Black in color INCLUDES: One Roll Hoop (Roll Bar) One EZ Start Plug Mount REQUIRES: Assembly onto Vehicle

FEATURES: Black plastic construction "TRAXXAS" molded into battery box lid Includes bosses needed to install the wheelie bar INCLUDES: One battery box (part #5515x) Four 2.5X10mm Socket Head Cap...

FEATURES: Nylon flanged tapered nuts. Blue anodized aluminum countersunk cap head screws. INCLUDES: Two nylon nuts. Two aluminum 8X4mm screws. REQUIRES: Securing wing to body with hardware

FEATURES: For front and rear application to reduce chassis roll in turns and add stability INCLUDES: Two thick and two thin swaybars, two mounts, two linkage sets, mounting haardware, drill bit and...

FEATURES: Nylon and metal construction Black and silver in color INCLUDES: One Thick Front Sway Bar (black in color) One Thin Front Sway Bar (silver in color) One Thick Rear Sway Bar (black in color)...

FEATURES: Designed for use with the Traxxas Revo when fitted with the TRX racing engine Dual chamber enhances mid to high RPM power ROAR legal Polished aluminum construction INCLUDES: Traxxas Tuned...

FEATURES: The Traxxas Resonator aluminum tuned pipe for Jato is specifically engineered to fit right in the chassis and complement the Jato's TRX 0.15 racing engine Dual-chamber pipe improves top-end...

FEATURES: The Traxxas Resonator aluminum tuned pipe for Jato is specifically engineered to fit right in the chassis and complement the Jato's TRX 0.15 racing engine. The single-chamber design...

FEATURES: Constructed of hardened plastic, black in color Installs at rear of chassis to hold wheelie bar arm and wheels in place INCLUDES: Assembled optional Wheelie Bar Mount with mounting...

The accessory Revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric. The wheelie bar assembly is easy to install for controlled...

FEATURES: Plastic construction Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 18.35mm (0.72") Width at ball joint: 10.35mm (0.40")

FEATURES: Constructed of steel, threaded on both ends TiN coated for strength INCLUDES: Two TiN coated Shock Shafts for the Revo type GTR Shocks REQUIRES: Disassembly of shocks SPECS: Length: 1.8"...

FEATURES: Polished aluminum construction INCLUDES: Two Shock Shafts REQUIRES: Installin in shock set  SPECS: Length: 1.8" (47mm) Diameter: 0.14" (3.5mm) shaft 0.098" (2.5mm) threads

GTR shocks in brilliant anodized color! Whether you're looking for the ultimate in damping performance and consistent lap-after-lap control, or you want to customize the look of your truck, the...

GTR shocks in brilliant anodized color! Whether you're looking for the ultimate in damping performance and consistent lap-after-lap control, or you want to customize the look of your truck, the...

GTR shocks in brilliant anodized color! Whether you're looking for the ultimate in damping performance and consistent lap-after-lap control, or you want to customize the look of your truck, the new...

FEATURES: Aluminum shock bodies Fully assembled INCLUDES: Two GTR shocks One bottle of silicone shock oil (weight unknown) Four shock pistons One shock wrench REQUIRES: Shock springs and installation...

FEATURES: Rubber Construction Blue in Color INCLUDES: Two Blue Rubber Driveshaft Boots REQUIRES: Assembly onto Vehicle

FEATURES: Black plastic construction INCLUDES: Two drive yokes Two 4x15mm Yoke pins REQUIRES: T-Maxx 3.3 SPECS: Length: 15/16" (23mm) Diameter: 3/4" (17mm)

FEATURES: Plastic Brake Yoke Steel Brake Pins(each knurled on one end) Steel Screw Pins INCLUDES: One Brake Yoke Two Brake Pins One Screw Pin REQUIRES: Assembly to the vehicle SPECS: Brake Yoke Outer...

FEATURES: Constructed of hardened plastic For front and rear driveshafts INCLUDES: Two external splined shafts Two internal splined shafts REQUIRES: Installing between yokes on each drive shaft...

FEATURES: Black plastic construction INCLUDES: Two yokes Two drive pins REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Fully assembled Plastic telescoping drive shaft with steel universals Blue rubber boot shields telescoping sections from dirt Attaches to the differential with one screw pin Works on the...

FEATURES: Black plastic construction Blue rubber shaft boots INCLUDES: Two half shaft assemblies REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 120mm (4.7")  

FEATURES: Plastic construction, exo-carbon finish wingINCLUDES: One rear wing with decalsREQUIRES: Installation on the Revo 3.3SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm)COMMENTS: Also available...

FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo 3.3 SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm) COMMENTS: Also available in...

FEATURES: Red in color (small purple square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16"...

FEATURES: Red in color (small blue square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16"...

FEATURES: Steel construction Painted red w/small silver stripe 4.9 tension rate (Light) INCLUDES: Two Shock Springs REQUIRES: Assembly to vehicle SPECS: Static Length: 50mm (1.77") Wire Diameter: 2...

FEATURES: Steel construction Painted red w/small black stripe 4.4 tension rate (slightly lighter than stock rear spring) INCLUDES: Two 4.4 Black Rate Shock Springs for the Traxxas Revo REQUIRES:...

FEATURES: Red in color Tan band on spring indicates 4.1 tension rating INCLUDES: Two 4.1 rear shock springs REQUIRES: Nothing. These are direct fit springs. SPECS: Length: 1-3/4" (44mm) Outer...

FEATURES: Red in color Green band on spring indicates 3.5 tension rating INCLUDES: Two 3.5 rear shock springs REQUIRES: Nothing. These are direct fit springs. SPECS: Length: 90mm (3.5") Outer...

FEATURES: Metal construction White in Color Pink Weight Rating 1.4 INCLUDES: Two Super Shock Springs Pink 1.4 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Tan Weight Rating 1.0 INCLUDES: Two Super Shock Springs Tan 1.0 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Orange Weight Rating 0.9 INCLUDES: Two Super Shock Springs Orange 0.9 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Yellow Weight Rating 0.7 INCLUDES: Two Super Shock Springs Yellow 0.7 rating REQUIRES: Assembly onto Vehicle

.

FEATURES: Direct drop-in for the Revo 3.3, Revo 2.5Rs require slight chassis modification, older Revos require the latest gearbox housing- for proper installation For use with Revos already equipped...

FEATURES: Composite nylon construction, black in color Replaces a worn or damaged center wing mountINCLUDES: One Center Wing Mount Two Beveled Nylon Wing WashersREQUIRES: The remaining parts of 9411...