Traxxas

FEATURES: Preassembled sensor assembly INCLUDES: One Optidrive Sensor Two 2.5x6mm caphead machine screws REQUIRES: Nothing. This is a direct replacement part.

FEATURES: Steel and plastic gears INCLUDES: One Plastic Forward gear One Steel Reverse gear One Steel retaining clip One copper gear washer One gear pin One instruction sheet

FEATURES: Nylon Construction Black and White in Color INCLUDES: One Nylon FWD Output Gear One Nylon REV Output Gear One White Nylon Drive Dog Carrier REQUIRES: Assembly onto Vehicle SPECS: FWD Gear-...

FEATURES: Black plastic and steel wire construction INCLUDES: One ball link One straight linkage rod One coiled linkage rod One servo horn REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Aluminum and steel construction INCLUDES: One clutch assembly One 2x9.8mm pin One 6x8x0.5mm washer REQUIRES: Nothing. This is a direct replacement part.

FEATURES: Nylon construction INCLUDES: One 1st speed gear REQUIRES: Assembly to vehicle If the Primary Shaft Set is needed, use 5393. SPECS: Gear Diameter: 45mm (1.7") Gear Thickness: 5.5mm (.22")...

FEATURES: White plastic construction INCLUDES: One 39T 2nd speed gear One 13T/17T input gear One screw pin REQUIRES: Installation into Traxxas Revo.

FEATURES: White plastic construction INCLUDES: One 38T 2nd speed gear One 13T/18T input gear One screw pin REQUIRES: Installation into Traxxas Revo.

FEATURES: Steel constructionINCLUDES: Two Output Gears Two Spider Gears Spider Gear Shaft and Diff Carrier Support Instruction SheetREQUIRES: Diff lube; 10K weight 5135 (sold separately)30K weight...

This is the optional Differential Spool for the Traxxas Revo. FEATURES Constructed of steel Installs in diff housing on either front...

FEATURES: Plastic Diff Carrier Blue Rubber Shaft Gaskets Black Rubber Diff Carrier Gaskets Gray Washer INCLUDES: One Diff Carrier Two Blue Rubber Shaft Gaskets One Black Rubber Diff Carrier Gaskets...

FEATURES: Durable black nylon constructionINCLUDES: One diff housing (2 pieces)REQUIRES: 5119 10x15mm Bearing (1) 5118 8x16mm Bearing (1) 5117 6x12mm Bearings (2) 5381 Diff Carrier & Gasket 3965...

FEATURES: Direct replacement part INCLUDES: One differential ring gear One pinion gear REQUIRES: Traxxas Revo 3.3 2.5x8mm cap head screws #3965

FEATURES: Nylon and Rubber Construction Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots Four Black Dust Boot Retainer Four Blue Notched Dust Boot Retainer Four Blue Rubber Boot...

FEATURES: Steel idler gear construction Plastic idler gear support construction Idler gear support is black in color Idler gear bearing preinstalled INCLUDES: One idler gear Part #5377 One idler gear...

FEATURES: Rubber, slicone, plastic, & nylon construction INCLUDES: Mounting post (1), grommets (2), tank gaurd (1), mounting clips (2), o-ring for cap (1), pull ring for cap (1), mounting screws...

FEATURES: Metal construction Black in color INCLUDES: One output shaft, Part #5369 REQUIRES: Installation on the Traxxas Revo SPECS: Overall length: 3-3/8" (85mm) Diameter: 1/4" (6mm)

FEATURES: Steel construction Black in color INCLUDES: One input shaft, Part #5366 REQUIRES: Installation on the Traxxas Revo SPECS: Length: 2-3/16" (56mm) Diameter: 3/16" ( 5mm)

FEATURES: Aluminum construction with fiber pads pre-glued INCLUDES: Two brake pads REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Plastic construction Tight spring on the top to prevent air leakage Puller for opening the fuel tank quickly INCLUDES: Fuel Tank REQUIRES: Installation SPECS: Length: 3.58" (91mm) Width: 2...

.

FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set REQUIRES: Pushrod

FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set Eight red Aluminum Spacers REQUIRES: Steel Pushrod -or- the Optional Aluminum Pushrod

FEATURES: Aluminum Construction Gun Metal Grey in Color INCLUDES: Thirty Tall Centered Aluminum Hollow Balls Two Tall Offset Aluminum Hollow Balls Two Bump/Steer Adjustment Shims REQUIRES: Assembly...

FEATURES: Metal Construction Silver and Black in Color INCLUDES: Four Silver Metal Hollow Balls Four Black Metal Shims REQUIRES: Assembly onto Vehicle

FEATURES: Aluminum construction Gun Metal in color Threaded on one end w/machined nut at center of post INCLUDES: Four Rocker Arm Posts REQUIRES: Assembly to vehicle SPECS: Overall length: 33.5mm (1...

FEATURES: Black steel construction INCLUDES: Two Rocker Arm Posts REQUIRES: Installing on the vehicle SPECS: Length: 1.3" (32.8mm) Diameter: 0.20" (5mm) unthreaded portion 0.23" (5.9mm) threaded...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Fits Continued: 1/10 Slash R.G.D. / Rally VXL / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / T-Maxx Classic FEATURES: Aluminum construction, green anodized in color INCLUDES: Four aluminum splined...

FEATURES: Aluminum construction INCLUDES: One slipper pressure plate One slipper hub REQUIRES: Installation onto vehicle.

FEATURES: Plastic construction Black in color Metal Pivot Balls INCLUDES: Six Rod Ends Six Pivot Balls REQUIRES: Assembly to vehicle SPECS: Length: 18mm (.71") Width at ball joint: 9.5mm (.38")

FEATURES: Plastic construction Black in color INCLUDES: Four Rear Toe-Link Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 23mm (.91") Width at ball joint: 11mm (.43") COMMENTS: Ring on the rod...

Fits Continued: 1/10 Ford Raptor / Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Plastic construction Black in color Metal Pivot Balls INCLUDES: 12 Rod Ends 12 Pivot...

FEATURES: Black and grey plastic construction INCLUDES: Four throttle servo horns (Airtronics/Sanwa, Hitec, KO Propo/Fut, JR) Eight steering servo horns for the above mentioned radio brands REQUIRES:...

Steering arm (upper & lower)/ servo saver/ servo saver spring/ steering arm shaft

FEATURES: Black plastic construction Standard and maximum throw steering stops INCLUDES: Steering arm mount Part #5343X Steering stop #5343X  

Linkage, steering (Revo) (3x30mm turnbuckle) (2)/ rod ends (4)/ hollow balls (4) Replacement part for these models: Slayer Pro 4x4 ​

FEATURES: Connects between servo horns and steering arms INCLUDES: Two 3x50mm steel turnbuckles, four short rod ends and four hollow balls REQUIRES: Installing on steering assembly according to...

FEATURES: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange INCLUDES: One Exhaust Header REQUIRES: Assembly to...

FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece design INCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part...

FEATURES: The plastic bumper is silver in color "TRX" logo in the center of the bumper Body mount is black in color INCLUDES: One rear bumper One bumper mount (2) 4X10mm button head screws (2) 3X26mm...

FEATURES: The plastic bumper is silver in color "TRX" logo in the center of the bumper Body mount is black in color INCLUDES: One rear bumper Part #5336 One bumper mount Part #5336 (2) 4X10mm button...

  FEATURES: Plastic Construction, Black Chrome in Color INCLUDES: One Front and one Rear Bumper REQUIRES: Installation SPECS: Front Bumper Rear Bumper Length: 104mm (4.09") Length: 116mm (4.57")...

Bumper, front (chrome)/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

FEATURES: Nylon Construction Black in Color Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier One Right Axle Carrier Four Dust Boot Retainers Two Bearing Spacers REQUIRES: Installation

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks for the Traxxas Revo. REQUIRES: Bolting to each...

FEATURES: Durable black nylon construction INCLUDES: One upper LEFT FRONT suspension arm One lower LEFT FRONT suspension arm REQUIRES: Suspension pin set to attach to bulkhead SPECS: UPPER LOWER...

FEATURES: Black plastic construction Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330 (2) rocker shafts Part #5354 (4) 4X14mm button head screws  

FEATURES: Black plastic construction Rocker shafts preinstalled INCLUDES: Rear bulkhead halves Part #5329 (2) rocker shafts Part #5354 (4) 4X14mm button head screws

FEATURES: Nylon construction Black in color INCLUDES: One Stering Servo Cover Plate REQUIRES: Installation on the vehicle SPECS: Length: 55mm (2.17") Width: 20mm (0.79") Height: 9mm (0.35")

FEATURES: Black plastic construction INCLUDES: Four steering servo mounts REQUIRES: Nothing. These are direct replacement parts. COMMENTS: Since the Revo uses two steering servos, the vehicle...

FEATURES: Constructed of plastic Holds the high torque and micro servos for the throttle/brake operation and transmission shift INCLUDES: Traxxas Left Electronics Box with lid REQUIRES: Installing on...

FEATURES: Nylon construction, black in color INCLUDES: One Throttle Servo Mount Two 4x10 Socket Head Screws REQUIRES: Installation SPECS: Length: 80mm (3.15") Width: 27mm (1.06") Height: 20mm (0.79")

FEATURES: Black plastic construction Accomodates either AA battery holder or RX flat pack INCLUDES: One receiver box with cover One battery box with cover Rubber charge jack plug Foam pad and...

FEATURES: Black plastic construction INCLUDES: One right electronics box One box cover/charge jack plug Three pieces of adhesive backed foam padding REQUIRES: Nothing. These are direct replacement...

FEATURES: Anodized aluminum (2.5mm thick) INCLUDES: One front & one rear Tie Bar w/one 3x10mm button head screwREQUIRES: 2579 Button Head Screw 3X15mm for rear COMMENTS: The flat tie bar is for...

FEATURES: Steel construction Polished finish INCLUDES: Two Long Suspension Pins Four Short Suspension Pins SPECS: Long Suspension Pin Length: 85mm (3.35") Short Suspension Pin Length: 24mm (0.95")...

These are the (optional) Steel Pushrods for the Rocker Arms These go between the Rocker Arms and the Lower Suspension Arms FEATURES: Black steel construction INCLUDES: Two Pushrods w/pre-installed...

These are the (optional) Red Aluminum Pushrods for the Rocker Arms These go between the Rocker Arms and the Lower Suspension Arms **Must be used with Progressive-1 Rocker Arm Set, .** FEATURES: Red...

  FEATURES: Metal pushrod construction Plastic rod ends with hollow ball ends INCLUDES: (2) pushrods (4) rod ends (4) hollow ball ends REQUIRES: Installation on a Traxxas Revo SPECS: Pushrod...

FEATURES: Black plastic construction INCLUDES: One front shock mount One rear shock mount Four chassis wire clips Four 3x32mm caphead machine screws Four 3x6mm buttonhead machine screws  

FEATURES: Black plastic construction "TRX" logo on front body mount INCLUDES: Front and rear body mounts Part #5314 Front and rear body post Part #5314 (4) 2.5X18mm screw pins (1) 4X10mm button head...

FEATURES: Button head machine screws. Starter attachment screws with threadlock. INCLUDES: Six screws. SPECS: Length: 12mm Diameter: 3mm

.

.

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race...

FEATURES: Replaces worn or damaged air filter components INCLUDES: Foam Filter Element with Plastic Holder with Body Clip, Rubber Connector and Wire Bracket

FEATURES: Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber attachment hose INCLUDES: Foam filter and pre filter, support cap, filter base and wire mount and...

FEATURES: Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber attachment hose INCLUDES: Foam filter and pre filter, support cap, filter base and wire...

FEATURES: Plastic construction Black in color INCLUDES: One Air Filter Housing One Foam Insert Element One Rubber Filter Base One Cable Tie SPECS: Diameter at Mounting Base: 0.55" (14mm) Diameter of...

FEATURES: Black plastic air filter housing with cover screen and and changeable element Rubber double angled neck for filter Zip tie for fastening INCLUDES: One screened filter One rubber double...

FEATURES: Constructed of foam and pre-oiled to trap dirt Pre-Filter for extra filtration INCLUDES: Three Air FIlter Inserts for the Traxxas 3.3 engine SPECS: Height: 38mm (1.5") Diameter: 38mm (1.5")

FEATURES: Constructed of foam and pre-oiled to trap dirt INCLUDES: Three Air FIlter Inserts for the Traxxas 2.5 (TRX 2.5, 2.5R, 3.3) engine REQUIRES: Installing in air filter boot on engine SPECS:...

FEATURES: Black plastic air filter housing with cover screen and and changeable element Rubber angled neck for filter Rubber adapter for filter Zip tie for fastening INCLUDES: One screened filter One...

FEATURES: Red silicone construction. INCLUDES: One 12.2x1mm o-ring. REQUIRES: Nothing. This is a direct replacement part.

.

.

FEATURES: Silicone construction Blue in color INCLUDES: One Tune Pipe Coupler One Exhaust Deflector (for use on the tune pipe) One short Tie-Strap Two long Tie-Straps REQUIRES: Assembly to...

FEATURES: Metal construction. Used on the Traxxas TRX 2.5. engine INCLUDES: (1) Flywheel Nut

.

This is the End Cap and O Ring for the carburetor of the Traxxas 2.5 engine. This end cap threads into the carburetor body on the opposite side of the low speed needle. FEATURES: End cap is...

.

.

FEATURES: Fits Traxxas 1/10 scale nitro vehicles Replaces worn or damaged clutch bells Constructed of hardened steel INCLUDES: One Traxxas 17 Tooth Steel Clutch Bell Two 5mm x 8mm 0.5mm fiber washers...

FEATURES: Metal construction Five cooling holes on the face of bell (bellow the teeth)INCLUDES: One clutch bellTwo washersTwo e-clipREQUIRES: This clutch bell uses 5X11 bearings #4611 (not...

FEATURES: Vented clutch bell One piece bell design INCLUDES: One 15 tooth black vented clutch bell Two 5x8x0.5mm fiber washers One 5mm e-clip REQUIRES: Using the original 5x11x4mm clutch bell ball...

FEATURES: Metal construction Five cooling holes on the face of bell (bellow the teeth) INCLUDES: One clutch bell Part #5214 Two washers Part #1985 Two e-clip Part #1633 REQUIRES: This clutch bell...

.

.

 Fits Continued: 1/10 Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Revo / T-Maxx FEATURES: Constructed of rubber, black in color with with "TRAXXAS" written in white on the...

These are the 5182A 20 x 27 x 4mm Ball Bearings for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber...

FEATURES: Holds all gears including the 2speed gear set and input shaft Gray in color, constructed of hardened plastic Fits front or rear of vehicle INCLUDES: One each Front and Rear Gearbox Halves,...

Ball bearings, black rubber sealed (6x13x5mm) (2) Replacement part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit Unlimited Desert...

FEATURES: Stainless Steel bearing construction Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings Part #5180 SPECS: Inside diameter: 6mm (0.24") Outside diameter: 13mm (0.51") Width: 5mm...

FEATURES: Steel construction Silver in color INCLUDES: Two 59mm screw pins. Four 73mm screw pins. Two 65mm screw pins.

FEATURES: Black plastic construction INCLUDES: One sensor cover (one black plastic plastic construction) One black plastic cover (covers the spot that the optidrive was) One blue rubber...

FEATURES: Steel construction Can be used to replace a bent or damaged front center driveshaft INCLUDES: One steel constant-velocity driveshaft REQUIRES: Dust boots and pins(TRAC5129) SPECS: Length:...

FEATURES: Steel construction INCLUDES: Two steel constant velocity driveshafts Two M4/15 screw pins REQUIRES: Installation onto vehicle. SPECS: Length: 18mm (.70") Diameter: 13mm (.51")