Traxxas

FEATURES: Constructed of steel with serrated flange area for sure grip Nylon insert INCLUDES: Eight 5mm Flanged Nylon Locking Nuts REQUIRES: 8mm nut drivers SPECS: Hex Size: 8mm Inner Diameter: 5mm

FEATURES: Metal Construction Black in Color Hex Head Design INCLUDES: Six 4mm x 15mm Black Metal Screw Pins. REQUIRES: Assembly onto Vehicle 2mm Hex Wrench SPECS: Length (Overall): 15.9mm (0.62")...

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum Anodized black in...

FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between wheel hubs and rear bulkheads SPECS: Length:...

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum anodized fire red in...

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum Anodized black in...

FEATURES: Thicker steel construction. INCLUDES: Two turnbuckles with pre-installed rod ends and balls. REQUIRES: Nothing. These are direct replacement rods. SPECS: Length: 108mm (4.25") Thickness:...

FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap  

Spacer, pushrod (aluminum, blue) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)Replacement part for these models:E-Revo BrushlessE-RevoRevoSummitAccessory part for these...

FEATURES: Helps to support axle carriers and shocks Black in color, constructed of hardened plastic COMMENTS: For the 3.3 version only.

FEATURES: Restores performance to worn driveshaft components INCLUDES: Four Rubber accordian style dustboots, pins, and lube for two driveshaft assemblies

Ball bearings, black rubber sealed (12x18x4mm) (2) Replacement part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit X-Maxx

FEATURES: Stainless Steel Construction Blue Rubber Sealed INCLUDES: Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings REQUIRES: Assembly onto Vehicle SPECS: Outer Diameter: 18mm (0.70") Inner...

FEATURES: Steel Construction Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Side Thickness: 4mm COMMENTS:...

FEATURES: Stainless Construction Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle SPECS: Inner Diameter: 8mm (0.31") Outer Diameter: 16mm (0.62")...

Ball bearings, black rubber sealed (6x12x4mm) (2)

Ball bearings, black rubber sealed (5x11x4mm) (2)

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Revo / T-Maxx /...

Ball bearings, black rubber sealed (5x8x2.5mm) (2)

This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES Metal bearing construction Blue rubber dirt shields ...

.

Ball bearings, black rubber sealed (17x23x4mm) (2)Replacement part for these models:Maxx®

.

.

Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

Oil, shock (50 wt, 600 cSt, 60cc) (silicone)Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax®...

FEATURES: Clear plastic 500cc capacity bottle Blue anodized aluminum spout INCLUDES: One Fuel Bottle One fuel bottle spout with black plastic cap REQUIRES: Filling with glow fuel. SPECS: Capacity:...

FEATURES: Replaces stock reverse output gear. Constructed of plastic. INCLUDES: One 26 tooth reverse output gear assembly REQUIRES: Installing gear on output shaft in gearbox.

FEATURES: Replaces stock forward output gear. Constructed of plastic. INCLUDES: One 26 tooth forward output gear assembly REQUIRES: Installing gear on output shaft in gearbox.

FEATURES: This is the gear for the shaft that converts the T-Maxx to forward only (4991). Blue plastic construction. 26 tooth gear. Carded packaging. INCLUDES: One 26 Tooth Gear. REQUIRES: Forward...

FEATURES: Fits first generation T-Maxx transmission without Optidrive Steel shaft with plastic gear 22T and 17T gears Pre-assembled on shaft INCLUDES: One transmission input shaft REQUIRES:...

FEATURES: Replaces damaged or worn drive hubs Constructed of aluminum INCLUDES: One Drive Hub Clutch Assembly for the Traxxas T-Maxx One 6x8x0.5mm washer REQUIRES: Installing inside transmission on...

FEATURES: Replaces damaged or worn snap rings Constructed of steel INCLUDES: Two 14mm Snap Rings for the gear hub assembly for the Traxxas T-Maxx REQUIRES: Installing on gear hub assembly (4986)

FEATURES: Metal construction Black in color INCLUDES: One differential spool REQUIRES: Assembly onto a T-Maxx truck.

Fits Continued: 1/10 Slash R.G.D. / Ford Raptor / Nitro Jato 3.3 / Revo / T-Maxx FEATURES: Constructed of hard plastic Axles constructed of steel INCLUDES: Four wheels and two axles REQUIRES:...

FEATURES: Attaches to and protects chassis and transmission Skidplate is gray in color Nylon construction INCLUDES: One Skidplate REQUIRES: Installing on chassis  

FEATURES: Replaces worn brake discs Fiber faced for long life INCLUDES: One Brake Disc REQUIRES: Installing brake adapter (4966), pads (4965) and output yoke (4927) at rear of transmission.

These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins Axle pins are steel INCLUDES: Four 2.5x12mm axle...

FEATURES: Blue anodized. Machined 6061 T-6 aluminum construction. Packaged in foam, on a bubble sealed header card. INCLUDES: Four Hex Wheel Hubs Four 2.5 x 10mm Axle Pins REQUIRES: Assembly onto the...

FEATURES: Replaces missing or damaged hex wheel hubs Hubs are made of molded black plastic Axle pins are steel INCLUDES: Two Hex Wheel Hubs Two 2.5x12mm axle pins REQUIRES: Inserting pins through...

FEATURES: Features heavy duty nylon yokes for long lasting durability. The steel axle extends from the nylon yoke. Black in color. INCLUDES: Two heavy duty stub axles REQUIRES: Assembly onto the...

FEATURES: Durable nylon construction Steel u-joints INCLUDES: Two long external splined half shafts Two long internal splined half shafts Four u-joint connectors REQUIRES: Assembly into a T-Maxx or...

FEATURES: Black nylon construction INCLUDES: Two heavy-duty short half-shafts (external-splined) Two heavy-duty short half-shafts (internal-splined) Four metal U-joints REQUIRES: Nothing, direct...

FEATURES: Clear, nylon construction Black fuel tank cap (spring loaded) INCLUDES: One fuel tank One Pre-installed lid with spring One Pre-installed pressure tap REQUIRES: Assembly on to Traxxas...

FEATURES: Stock aluminum steering bellcranks. Steering link is steel and rods ends are plastic. INCLUDES: Two bellcrank posts One 3x25mm steering link threaded rod with rod ends REQUIRES: Placing...

FEATURES: Replaces stock steering bellcranks. All components are plastic, except for the shoulder screws which are steel. INCLUDES: Two steering bellcranks Four 5x8x2.5mm bellcrank bushings. Two...

FEATURES: Made of clear silicone material Secures tuned pipe to the header (manifold) INCLUDES: One Coupler SPECS: Outside Diameter: 3/4" (19mm) Inside Diameter: 1/2" (13mm) Length: 1" (25mm)

.

FEATURES: Stainless steel construction. INCLUDES: Four 3x70.5mm pins for the upper front and rear suspension arms. Two 3x63mm pins for the lower front suspension arms. Two 3x57mm pins for lower rear...

FEATURES: Durable steel construction INCLUDES: Eight pins REQUIRES: Assembly onto T/E-Maxx SPECS: Length: 65.3mm (2.57") Diameter: 3.2mm (.13") COMMENTS: These are enough hinge pins for the entire...

FEATURES: Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in colorINCLUDES: Skidplate and stainless steel plateREQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Replaces damaged rear skidplates. Constructed of black plastic. INCLUDES: One rear skidplate. REQUIRES: Bolting to bottom of chassis using three 3x10mm countersunk machine screws (not...

FEATURES: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color INCLUDES: Skidplate and stainless steel plate REQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Black nylon construction INCLUDES: One L&R Front Bumper Mount Set One L&R Rear Bumper Mount Set Eight 3x15mm round head machine screws REQUIRES: Nothing. This is a direct...

FEATURES: Replaces stock plastic bumpers. Constructed of molded silver colored plastic. INCLUDES: One dual-tube front bumper One dual-tube rear bumper REQUIRES: Fastening each bumper to the bumper...

These pivot balls are installed through the upper and lower suspension arms and axle carriers and allow camber adjustment of the wheels. FEATURES: Replace stock pivot balls with these hardened heavy...

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks for the Traxxas T-Maxx. REQUIRES: Bolting to each...

.

FEATURES: Features thicker plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color. INCLUDES: Two heavy duty diff yokes Two yoke mounting...

FEATURES: Features strengthened plastic for long life and durability. These diff yokes are more rigid than the stock yokes. Black in color. INCLUDES: Two heavy duty diff yokes Two diff yoke mounting...

FEATURES: Supports center of chassis Gray in color, constructed of hardened plastic INCLUDES: Two Lower Chassis Braces for the T-Maxx 3.3 REQUIRES: Fastens to bottom of chassis with eight 3x12mm Cap...

FEATURES: Replaces damaged or missing body washers. Adhesive on one side allows easy attachment to body. Made of shock absorbing foam that helps to prevent splitting of body at mounting holes...

FEATURES: Threadlocking compound pre-applied. Hardened steel construction. Designed for use with Traxxas R/C kits. Hexagon socket drive insert. INCLUDES: Six 4mm Grubs

These shocks are hard-anodized and PTFE-coated just like the Big Bore shocks, but they have a slightly smaller cylinder diameter and standard steel shafts. A great alternative to the Traxxas Big Bore...

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

.

FEATURES: Made of RULON INCLUDES: Twelve pegs SPECS: length - 3.5mm diameter - 3mm COMMENTS: These pegs go in the holes on the side of the spur gear.

FEATURES: Hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES: Two hardened steel yokes with...

FEATURES: Black plastic construction INCLUDES: Two differntial output yokes Two 3x5mm countersunk screws Two screw pins REQUIRES: Installation SPECS: Length: .70" (18mm) Diameter: .51" (13mm)

This is the Replacement Yokes Set from Traxxas. FEATURES: White nylon differential output yokes. Stainless steel countersunk screws with phillips drive. Black steel grub screws. Used on the Traxxas...

FEATURES: Allows the slipper to slip under stress instead of the diff gears stripping. Better traction control Adjustable tension INCLUDES: One 84 tooth spur One 87 tooth spur Two metal diff...

PACKAGE INCLUDES: 2- Bearings SPECS: 5x10x4mm FEATURES: The bearings are constructed of stainless steel

This is the Glow Plug Lead Wire for the T-Maxx Truck Kit. This wire that is attached to the glow plug that heats it while starting. FEATURES: This is a blue silicone wire. It has one bullet connector...

.

.

.

FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm Socket Head Cap Screws Two 3mm Lock Washers One Paper...

.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Replaces worn brake discs INCLUDES: Brake Disc Steel Adapter

FEATURES: Aluminum construction Hex drives and phillips drive INCLUDES: One engine mount Two upper plates Hardware SPECS: Length of engine mount 64mm (2.51") and Width: 65mm (2.56") Length of left...

Features: Clear plastic, flip-top style tank for glow fuel only. Nipples for fuel outlet and muffler pressurisation are conveniently located on the top of the tank Muffler pressurisation nipple is...

FEATURES: Plastic construction with flip top cap INCLUDES: 5oz (150cc) Fuel Tank with Rubber Vibration Cushion

FEATURES: Blue anodized aluminum construction. Nylon inserts. INCLUDES: Four 5mm locknuts. SPECS: Thickness: 4.95mm (.195")

FEATURES: Chromed steel construction. Nylon inserts. INCLUDES: Eight 5mm locknuts. SPECS: Thickness: 4.95mm (.195")

FEATURES: Black in color INCLUDES: Two clutch shoes One wrap around spring REQUIRES: Installation onto vehicle. SPECS: Length of shoe: 22.6mm (0.89") Height: 8mm (0.32")

FEATURES: Fits all Traxxas 1/10th scale nitro vehicles. Replaces worn or damaged clutch bells. Constructed of hardened steel. INCLUDES: One Traxxas 20 Tooth Steel Replacement Clutch Bell. Two 5mm x...

FEATURES: Fits all Traxxas 1/10th scale nitro vehicles. Replaces worn or damaged clutch bells. Constructed of hardened steel. INCLUDES: One Traxxas 18 Tooth Steel Replacement Clutch Bell. Two 5mm x...

This is the Replacement Recoil Starter Assembly for the Traxxas TRX-12, TRX-15 and Pro-15 Engine. INCLUDES: One Recoil Starter Unit w/String and Handle Installed

.

FEATURES: Aluminum construction, blue in color Designed for a clean install of a single brushless motor system in the E-Maxx 16.8V RTR (requires gear cover number 3997 (not included))INCLUDES: One...

FEATURES: Steel construction, gun metal in color Replaces a worn or damaged idler gear and shaft INCLUDES: One 20 Tooth Idler Gear One 5x18mm Idler Gear Shaft REQUIRES: Installation following the...

.

FEATURES: Black nylon constructionINCLUDES: One 33T output gear Two spacersREQUIRES: Silicone Grease, use #6037SPECS: Outer diameter: 1.37" (35mm) Thickness: 1.02" (26mm)

FEATURES: Plastic washers INCLUDES: Ten Washers SPECS: 6x8x.5  

FEATURES: Constructed of plastic Replaces damaged or broken diff housings INCLUDES: Left and Right Differential Housings and Pinion Collar REQUIRES: Installing all internal diff components

Traxxas Cover Gear/Dust Plug 3x6mm CS

FEATURES: Metal construction, black in color INCLUDES: One transmission output shaft, Part #5369 REQUIRES: Installation on the Traxxas E-Maxx SPECS: Overall length: 2.75" (70mm) Diameter of drive dog...

FEATURES: Plastic servo horn construction Steering rods come with rod ends installed INCLUDES: 2 steering servo horns 1 3x12mm threaded rod steering link with rod ends and hollow balls REQUIRES:...

FEATURES: Metal construction Black in color INCLUDES: Six 3mm x 10mm Shoulder Screws REQUIRES: Assembly onto Vehicle