Traxxas

FEATURES: Steel construction Silver in color INCLUDES: Six 3x15mm Roundhead Screws REQUIRES: Phillips screwdriver SPECS: Length: 15mm (0.59") Width: 3mm (0.12")

FEATURES: Steel construction INCLUDES: Six 3x6mm Roundhead Machine Screws REQUIRES: Phillips screwdriver SPECS: Length: 6mm Diameter: 3mm

.

Fits Continued: 1/10 Maximum Destruction / Grave Digger 30th / Monster Mutt / Rally VXL / Nitro Jato 3.3 / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Black steel construction. INCLUDES:...

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a...

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas...

FEATURES: White plastic contruction INCLUDES: Three bellcrank arms REQUIRES: Remainder of bellcrank steering system COMMENTS: These arms are unique in shape and will only work with the above...

FEATURES: Metal construction Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

FEATURES: Steel Shafts INCLUDES: One 20mm Shaft One 25mm Shaft One 44mm shaft REQUIRES: Installation on vehicle

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES:...

FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins (TRAC4940) SPECS: Length: 98.4 mm (3.875") Width: 7.9 mm (0.3125") Thickness: 2.0 mm (0.082")

FEATURES: Nylon construction Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS: Length: 3" Width: 1.2" COMMENTS: This will work on the Bandit, Nitro...

Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" wheels. Available in mirror chrome...

Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" wheels. FEATURES: Rubber Anaconda...

ANACONDA 2.2" TIRES: Anaconda 2.2" performance street tires provide exceptional wear and sticky traction for high-speed asphalt action. Fits Traxxas and other standard 2.2" buggy wheels. FEATURES:...

FEATURES: Rubber Anaconda 2.2" tires Split X-Pattern tread Foam inserts Tracer 2.2" chrome wheels INCLUDES: Two rear tires for the Bandit REQUIRES: Mounting to Wheels SPECS: Diameter: 3.46" (88mm)...

FEATURES: Rubber Anaconda tires Split X-Pattern tread Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS: Overall Diameter:...

FEATURES; Pre-Molded White Plastic Wheels Cone-Dish Design Dyeable White Plastic INCLUDES: 2-Front Wheels SPECS: 2.2" Diameter 3/4" wide REQUIRES: Customer will need to purchase front tires...

Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias ribbed 2.2" tires) (2) (Bandit front, soft compound w/ foam inserts) Alias 2.2" soft compound tires come assembled with foam inserts...

FEATURES: Rubber Alias tires Ribbed pattern tread Medium compound with foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Alias 2.2" tires REQUIRES: Installation on the Bandit SPECS:...

FEATURES: Alias ribbed tires For use on front of buggy Soft compound INCLUDES: Two Traxxas Alias Ribbed 2.2" tires REQUIRES: Wheels Tire Glue SPECS: Inner Diameter: 2.2" (55.8mm) Outer Diameter: 3...

FEATURES: Medium compound firmness rated tires with rectangular tread Five spoke chrome wheels INCLUDES: Two Alias 2.2 Tires with Foam Inserts and Tracer Wheels SPECS: Width: 1.7" (43mm) Outer...

.

FEATURES: Alias ribbed tires For use on rear of buggy Soft compound INCLUDES: Two Traxxas Alias Ribbed 2.2" tires REQUIRES: Wheels Tire Glue SPECS: Inner Diameter: 2.2" (55.8mm) Outer Diameter: 3.54"...

Includes: Two front springs Features: Sturdy steel construction Durable black finish Specs: 2" long (uncompressed) .75" diameter Requires: The rest of the shocks

.

.

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 55mm (75mm center to center) turnbuckles with instruction sheet REQUIRES: Installation on the...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two front 47mm (67mm center to center) turnbuckles REQUIRES: Installation on the vehicle

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two rear 36mm (56mm center to center) turnbuckles REQUIRES: Installation on the vehicle

This is the Camber Link Set in Gray for the 1/10 scale Traxxas Bandit. FEATURES Plastic construction, gray in color Non-adjustable ...

FEATURES: Black plastic camber links Two 2.56" (65mm) Two 3" (76mm) INCLUDES: Four camber links REQUIRES: Traxxas bandit SPECS: Thickness: 4mm COMMENTS: Camber links is another name for tie-rods.

FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts. SPECS: Length: 0.94" (24mm)...

.

.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

Body, Bandit, ProGraphix® (replacement for the painted body. Graphics are printed, requires paint & final color application)/ decal sheetAccessory part for these models:Bandit

.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

.

Fits Continued: 1/10 Nitro Rustler FEATURES: All these gears and shafts are made of metal(probably with a low amount of steel). INCLUDES: 4- planetary gears 4- planteary gear shafts 2- sun gears 1-...

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic This is a shock rebuild kit for 2 Traxxas black plastic shocks...

.

FEATURES: Steel construction (silver color) INCLUDES: Two (2) turnbuckles REQUIRES: Rod ends (4742) SPECS: Length: 82.4mm Diameter: 3mm

FEATURES: Aluminum Construction Anodized blue INCLUDES: (2) Assembled Turnbuckles REQUIRES: Installation onto Stampede 5mm Wrench SPECS: Length: 2.4" (61mm)

FEATURES: Steel construction Adjustable without removing from vehicle INCLUDES: Two 78mm turnbuckles for the Traxxas T-Maxx REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 78mm...

.

PACKAGE INCLUDES: Two 50mm turnbuckles. COMMENTS: Plastic rod ends are NOT included, use Traxxas part #4742 The turnbuckles have a molded in nut to make adjustments simple Uses a 5mm wrench for...

This is the Gear Set for the Steering Servo used on the Traxxas X-Maxx Monster Truck     FEATURES Replaces worn or broken...

Gear set, metal (for 2080X micro waterproof servo)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit

Waterproof Metal Gear Digital Servo • Metal Gear, Ball Bearing • Digital High-torque 125 oz-in.  • Transit Time .17 sec/60°  • L=55mm, H= 42.75mm, W=21.5mm

FEATURES: Three piece plastic case molded in blue and black color Replaces worn or damaged servo cases and gaskets INCLUDES: One Upper Case (blue plastic) One Middle Case (blue plastic) One Lower...

FEATURES: Ball bearings Black plastic construction INCLUDES: One digital high torque ball bearing servo SPECS: Ratings such as speed and torque have not been provided by Traxxas. Length: 2.16" (55mm)...

FEATURES: Yields Increased Power and Speed. INCLUDES: One High Torque Servo with J style connector. REQUIRES: Mounting into vehicle. SPECS: Length: 1.6" (40.5mm) Width: .8" (20.5mm) Height: 1.43"...

.

FEATURES: Machined aluminum 30T idler gear Hard anodized INCLUDES: One Auminum Idler Gear REQUIRES: Two 5 x 11mm bearings (DTXC1547) One #3195X top drive gear (TRAC3296) COMMENTS: This idler gear is...

PACKAGE INCLUDES: One 30 tooth idler gear

.

Features: White plastic parts Includes: (6) sets of drive shafts (each set consists of an inside shaft wich slides in the outside shaft). Dimensions: 2.5" long when fully compressed. Requires:...

Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)Accessory part for these models:Ford Fiesta® ST RallyNitro RustlerNitro SlashRustler® 4X4 VXLSlash 4X4 UltimateSlash 4X4 VXLStampede®...

Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)Accessory part for these models:Ford Fiesta® ST RallyRustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash...

Traxxas aluminum stub axle carriers add both strength and beauty without compromising the track-bred suspension geometry. Complete installation kit includes hardened-steel hingepins and e-clips...

FEATURES: Steel construction Constant velocity design Fully assembled INCLUDES: Two Steel Spline Rear Driveshafts

Includes: 2 white nylon telescoping shaft (each shaft is made of two pieces) 4 aluminum U-joints

Includes: 2ea 24X3mm pins 4ea 31.5X3mm pins 2ea 40X3mm pins 2ea 48X3mm pins 10ea 3mm e-clips

.

Fits Continued: 1/10 Nitro Stampede / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler / T-Maxx Classic FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS: Length: aprrox. 7/8"

.

Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)Accessory part for these models:Bandit VXLBanditBigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed ReplicaCraniac®DCB M41...

This Package Includes: (2) 3X45mm Screw pins (2) 3X35mm Screw pins (2) 3X30mm Screw pins (2) 3X27mm Screw pins (2) 3X20mm Screw pins Screw Pins are "hinges" for the suspension arms. These are almost...

Features: Made of fiber Black in color Wears better than metal Includes: (6) small washers (6) large washers Specifications: Small Large Outer Diameter 8mm 10mm Inner Diameter 5mm 5mm

Fits Continued: 1/10 Nitro Rustler INCLUDES: 14 bushings SPECS: 5x11mm bushings COMMENTS: These bushings would work on any vehicle using 5x11mm bushings.

These hardened, ground steel shafts have a super tough titanium nitride coating with a micro-polished finish that reduces stiction for smoother performance and resists scratching for much longer...

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler Includes: 2- front shock shafts.

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Blue aluminum construction INCLUDES: Two hex hubs Four axle pins REQUIRES: Assembly onto axles. SPECS: Hex...

Features: White plastic half shafts with universal joint ends Metal universal joints Includes: (2) inside shafts (2) outside shafts (4) universal joints (metal balls with 4 pins sticking out in a...

INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

This is an optional Traxxas "short" RPM Sensor. To collect critical RPM data (Revolutions Per Minute), a "trigger magnet" is installed in the spur gear of electric models, or the flywheel of nitro...

FEATURES: Allows wheelbase adjustment depending on track conditions and driver preference Forward pivot ball holes increase wheelbase 0.39" (10mm) and rearward pivot ball holes increase wheelbase 0...

.

FEATURES: Red anodized aluminum construction INCLUDES: Eight 4x6x3mm spacers REQUIRES: Nothing. These are direct fit parts.  

Replace your non-adjustable camber links with these 49 mm (82 mm center to center) metal turnbuckles for trackside camber adjustment. Comes assembled with rod ends and hollow balls.

.

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

BATTERY AND CHARGER SOLD SEPARATELY!Includes: Rustler 4X4 VXL with Velineon® VXL-3s and 3500kV motor, Quick Start Guide, TQi™ 2.4GHz radio system and High quality maintenance toolsRequired: 7.2-8.4v...

These are replacement LED Lens for the LaTrax Alias Quad-Copter Includes: 4 x LED Lens

These are replacement LED Lens for the LaTrax Alias Quad-Copter Includes: 4 x LED Lens

This is the replacement (backup) battery for the Traxxas / LaTrax Alias Quad Copter. Specifications: Cell count: 1S 3.7V mAh: 650mAh Features: This is the same as the stock battery included with your...

This is a pair of replacement blades for the LaTrax Alias. Includes: 2 x Rotor Blade 2 x 1.6x5mm BCS

This is a pair of replacement blades for the LaTrax Alias. Includes: 2 x Rotor Blade 2 x 1.6x5mm BCS

This is a Traxxas Electric Motor Temperature Sensor Mount. NOTE: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with...

This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critical to monitoring performance, gauging the effects of...

Traxxas 2-Channel TQ 2.4GHz Transmitter. **This transmitter is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** FEATURES: Replacement transmitter for...

FEATURES: Certified for use with the Traxxas XO-1 on road car Withstands centrifugal forces at speeds in excess of 100mph Cyanoacrylate (CA) type glue Sealing pin designed into cap prevents...