Traxxas

Motor, 2200Kv 75mm, brushless (with 6.5mm gold-plated connectors & high-efficiency heatsink)Replacement part for these models:E-Revo VXL BrushlessUnlimited Desert Racer

Body reamer (plastic handle)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot® No...

The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are...

This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1 hour of run time. Heavy-duty wiring provides efficient current...

Charger, AC, 500 mAh (7 cell, NiMH) (US only)Accessory part for these models:Ford Fiesta® ST RallySlash 4X4

Servo case/ gaskets (for 2080X metal gear, micro, waterproof servo)

Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)Accessory part for these models:1/18 LaTrax Desert Prerunner1/18 LaTrax Rally1/18 LaTrax Rally VR461/18 LaTrax TetonSummitTRX-4...

FEATURES: Steel and nylon constructionINCLUDES: One Complete Differential Assembly

FEATURES: Aluminum construction          Anodized red in colorINCLUDES: Four Pushrods          Eight Hollow...

This is a Complete Control Box for the Easy Start 2This houses the 7.2V battery for the Easy Start, and provides the start button.FEATURES: Black plastic construction...

Portal housings, inner (front), 6061-T6 aluminum (green-anodized) (2)/ 3x12 BCS (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4...

Caster blocks, 6061-T6 aluminum (blue-anodized), left and rightAccessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

LED light bar, roof lights (fits #8111 body, requires #8028 power supply)

Wheel nut washer, machined aluminum, orange / 3x12mm CS (4)

Upgrade Your Traxxas Model with theTQi Telemetry Expander 2.0!TQi Telemetry Expander (#6550) Contents (Three-Quarter View)Requires the TQi radio system with the Traxxas Link Wireless Module(#6511),...

.

FEATURES: Steel constant velocity driveshaft for 1/16 Slash INCLUDES: One steel driveshaft REQUIRES: Installation on vehicle SPECS:    Length: 1.9" (48mm) shaft...

Wheels, SCT red, beadlock style, dual profile (1.8" inner, 1.4" outer) (2)Replacement part for these models:1/18 LaTrax Desert PreRunner

Wheel nut washer, machined aluminum, green / 3x12mm CS (4)

.

.

Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, dual profile (2.2" outer, 3.0" inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD...

Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)Replacement part for these models:Ford Fiesta® ST RallyTelluride 4X4

Half shaft, external splined (steel-spline constant-velocity) (1) (fits 2WD Rustler/Stampede)Accessory part for these models:Bigfoot® No. 1Bigfoot® Officially Licensed ReplicaCraniac®Rustler...

Gear, 10-T pinion (32-p) (steel)/ set screw

Spacers (4)/ grip pads (3)/connector dust cover (1) (for TQi docking base) Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:SummitT-Maxx

Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

14-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

Shoulder Screws, 4x25mm cap-head machine (6) (with 5mm shoulder for Monster Buggy)

.

.

.

.

.

.

.

.

Gear, 34-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

.

.

.

.

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Spoke Wheels in...

Hold down, battery (for use with 30mm height and shorter battery packs)

FEATURES Steel construction, black in colorFits front and rear stock or optional shocks   INCLUDES Two Shock Springs   SPECIFICATIONS Length: 1.8"...

FEATURES: Gray plastic construction INCLUDES: Two mounts REQUIRES: Mounting SPECS: Length: 1-1/2" (38mm) Width: 3/8" (9mm) Height: 3/8" (9mm)

Description: Traxxas Carriers, Stub Axle (Left & Right) - TRA8352 This item package consists of the following Traxxas items. Carriers, stub axle (left & right)   For FORD GT

FEATURES: Steel construction          Constant velocityINCLUDES: Four Driveshafts

Body, Rustler 4X4 VXL, red/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

.

17-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

.

FEATURES: Nylon construction Black in color INCLUDES: One Rear Bumper and bumper mount  

FEATURES: Steel construction, red in color 4.9 damping rate with double yellow stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUIRES: Installation on shock assembly SPECS:...

FEATURES: Nylon construction Black in color INCLUDES: One Nylon Steering Drag Link Two 3mm Shoulder Screws REQUIRES: Assembly onto Vehicle

Rebuild Kit-differential shaft/adjusting nut/rings(2)/balls(10/PTFE-coated bushing/thrust bearing/thrust washers (2)/spring washers (2)/fiber washers (4)

.

.

.

.

.

.

.

.Low speed spray bar screws, 2x4mm roundhead machine screws (6)

FEATURES: Black steel construction Hexagon socket drive insert High round cap head screws INCLUDES: (6) Screws SPECS: Length: 23mm Diameter: 3mm

.

.

Replacement part for these models:Slash 4X4 UltimateUnlimited Desert RacerAccessory part for these models:E-Revo VXL BrushlessRustler 4X4 VXLTRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail...

FEATURES: Steel construction          Cap head with hexagon socket drive insert          Metal lock...

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler...

Tires and wheels, assembled, glued (TRX-4 satin beadlock wheels, Canyon Trail 1.9 tires) (2)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

.

.

Beadlock rings, black (1.9") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, green (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Beadlock rings, satin (1.9") (aluminum) (4)/ 2x10 CS (48)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit.

Body, GTS shock, long (silver aluminum) (1) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Shocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and...

Shocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and...

Springs, shock, long (natural finish) (GTS) (0.47 rate) (for use with TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4...

Suspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Suspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly KitTRX-4...

Suspension links, front lower, blue (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)Accessory part for these models:TRX-4 Assembly...

Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)

FEATURES: Replaces damaged or worn spur gear assemblies Constructed of plastic INCLUDES: One spur gear assembly REQUIRES: Diassembly of gearbox and installing spur gear onto primary gear shaft (4993)

Tube chassis, inner panels, aluminum (blue-anodized) (front (2)/ wheel well (4)/ middle (4)/ rear (2))

Tires and wheels, assembled (Method 105 black chrome beadlock wheels, Canyon Trail 1.9" tires, foam inserts) (1 left, 1 right)

.

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Hard anodized coated T-6 aluminum shock bodies with pistons and ball ends...

High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal...

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball...

This digital high-torque, ball bearing servo features the same precision control, quick response, and incredible torque as the 2070 model, but adds a waterproof case for worry-free driving in water,...

LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas iD batteries) Accessory part for these models: 1/16 E-Revo VXL 1/16 E-Revo 1/16 Slash 4WD 1/16 Summit VXL 1/16...

LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas iD batteries) Accessory part for these models: 1/16 E-Revo VXL 1/16 E-Revo 1/16 Slash 4WD 1/16 Summit VXL 1/16...

.

FEATURES: Aluminum Construction Polished Silver in Color Threaded for Easy Adjustment INCLUDES: One Silver Polished Threaded Aluminum GTR Shock Body REQUIRES: Assembly onto Vehicle Parts to Complete...

Features: Sturdy black plastic construction Includes: (1) Left and (1) right gearbox half Assembly screws are not included

FEATURES: Helps to control shifting of gears when the two speed conversion kit is installed INCLUDES: Shift Fork and Shaft REQUIRES: Installing over the Carrier/Drive Dog (TRAC3986) in the gearbox