Traxxas

.

Pro-Scale Realism Flood the desert with brilliant white light with the new High Intensity LED Off-Road Light Kit for the Traxxas Unlimited Desert Racer.  Traxxas innovation delivers...

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

.

Beadlock rings, blue (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

Beadlock rings, green (2.2") (aluminum) (4)/ 2x10 CS (48) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Sport TRX-4 Tactical Unit

.

.

.

Gear set, differential (spider gears (4), spider gear shaft (2)) 

Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTW

.

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

.

.

Push bar, bumper (chrome) (fits #8069 bumper) Accessory part for these models: TRX-4 Ford Bronco  

Linkage, sway bar, rear (2) (assembled with hollow balls)/ sway bar arm (left & right)

.

.

.

Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler INCLUDES: 2- plastic hex collars (wheel adapters) 4- stub axle pins

FEATURES: Cushioned double sided tape Anti-stick backing on each side kept until tape is applied INCLUDES: Two 25x25mm squares REQUIRES: Application SPECS: Length: 25mm Width: 25mm Thickness:...

This is the set of Traxxas Long GTR Shock Springs with 0.623 Orange Compression Rate. FEATURES Steel construction, white in...

This is the optional 15 Tooth Pinion Gear for the Traxxas X-Maxx. FEATURES Hardened steel construction Replaces stock 6491X 18T...

FEATURES: Steel construction   INCLUDES: Three Pinion Gear with set screw

FEATURES: Replaces missing or damaged brake cams Brake cam is blue aluminum Cam lever and grub screw are steel INCLUDES: One blue aluminum brake cam One cam lever One 3mm grub screw REQUIRES:...

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

FEATURES: Black Plastic Steering Blocks Aluminum Wheel Spindles INCLUDES: Two Steering Blocks Two Wheel Spindles REQUIRES: Traxxas Nitro Stampede, Nitro Sport, or Nitro Rustler. COMMENTS: None

Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw Accessory part for these models: E-Maxx E-Revo Slash 4X4 Ultimate Slash 4X4 Stampede 4X4 VXL Stampede 4x4 TRX-4...

FEATURES: Metal gear shafts Metal and plastic main differential INCLUDES: Main differential with steel ring gear Planetary gears and shafts Sun gears and shafts Silicone grease REQUIRES: Installation...

FEATURES: Anodized aluminum construction, blue in color Black nylon ball ends INCLUDES: One 49mm blue aluminum turnbuckle REQUIRES: Installation onto vehicle

Battery charge indicators (green (4), blue (4), grey (4)) Traxxas Battery Charge Indicator Plugs make it easy to manage the charge status of your batteries. Use green for fully charged batteries,...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Fan-cooled          21 turns          14 volt         ...

.

Tube chassis, inner panels (front (2)/ middle (4)/ rear (2)) Replacement part for these models: Unlimited Desert Racer

Spur gear, 62-tooth Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT ​

Driveshaft, center, aluminum (green-anodized) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT  

Mounts, suspension arms, aluminum (red-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Ford...

Tires and wheels, assembled, glued (Tactical wheels, Canyon Trail 1.9 tires) (2)

Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended stub axle)

Tailgate panel insert (clear, requires painting)/ adhesive foam tape (2) Replacement part for these models: TRX-4 Ford Bronco

Tailgate panel/ tail light lens (2) (left & right)

Bumper, rear (chrome)/ bumper mount/ 3x10 BCS (2)  Replacement part for these models: TRX-4 Ford Bronco

 

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, now in 1/16 scale. The wheelie bar mount is constructed of durable composite nylon and it offers an extra...

Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw. Accessory part for these models: E-Revo VXL Brushless X-Maxx

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears) 12-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur...

11-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw  Accessory part for these models: E-Revo VXL Brushless X-Maxx.

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Replacement part for these models: E-Maxx Brushless E-Maxx E-Revo Brushless E-Revo Rally VXL Revo Slash 4X4...

Ball bearings, black rubber sealed (10x15x4mm) (2) Replacement part for these models: Ford Fiesta® ST Rally Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 Stampede 4x4...

Hold downs, battery (blue-anodized) (2)/ adhesive foam battery pads/ shoulder screws (2)/battery hold-down posts (4)/ clips (4)

The Traxxas parallel and series connectors are for use with (#2925X) 7.2V NiMH battery packs only.

FEATURES Connects both batteries in series to the electronic speed control 16AWG size wire Traxxas High Current connectors with gold plated terminals ...

.

Body, GTR shock, 77mm, aluminum (blue-anodized) (rear, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 77mm, aluminum (red-anodized) (rear, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 77mm, silver aluminum (rear, no threads) Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 160mm, aluminum (red-anodized) (fully assembled w/o springs) (rear, no threads) (2) Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 139mm, aluminum (blue-anodized) (fully assembled w/o springs) (rear, threaded) (2) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (blue-anodized) (front, no threads) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, aluminum (red-anodized) (front or rear, threaded) Replacement part for these models: Unlimited Desert Racer

Body, GTR shock, 64mm, silver aluminum (front or rear, threaded) Replacement part for these models: Unlimited Desert Racer

Shocks, GTR, 134mm, aluminum (red-anodized) (fully assembled w/o springs) (front, threaded) (2) Replacement part for these models: Unlimited Desert Racer

Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

Nuts, 5mm flanged nylon locking (aluminum, green-anodized, serrated) (4) Replacement part for these models: Unlimited Desert Racer

.

.

Spur gear, 55-tooth Replacement part for these models: 4-Tec 2.0 VXL AWD Chassis

Toe links, steel (34mm) (2) Replacement part for these models: 4-Tec 2.0 VXL AWD Chassis Accessory part for these models: 4-Tec 2.0 AWD Chassis Ford GT® Ford Mustang GT

Wheels, 1.9", chrome (2)/ center caps (2)/ decal sheet (requires #8255A extended stub axle) Replacement part for these models: TRX-4 Ford Bronco Accessory part for these models: TRX-4 Scale and...

FEATURES: Steel constructionINCLUDES: One Diff Ring Gear          One Pinion Gear

FEATURES: Steel construction INCLUDES: Two shock shafts COMMENTS: These shafts get installed into the shock bodies.

.

FEATURES: Nylon construction Black in color INCLUDES: Four Nylon Rear Stub Axle Spacers REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Left Steering Servo Mount One Right Steering Servo Mount REQUIRES: Assembly onto Vehicle

FEATURES: Steel Construction Silver in Color Drilled for Better Braking INCLUDES: One Silver Drilled Steel Brake Disc REQUIRES: Assembly onto Vehicle SPECS: Diameter: 40mm (1.57") Thickness: 1mm (0...

FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between wheel hubs and front bulkheads SPECS:...

FEATURES: Rubber shielded          Steel constructionINCLUDES: Two rubber shielded bearingsREQUIRES: NothingSPECS:    Thickness: 2...

Wheelie bar mount (1)

FEATURES: Nylon Construction           Black in Color   INCLUDES: Three Spur Gears

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

INCLUDES: Eight 5 x 8mm Bearings (2.5mm thick) Six 5 x 11mm Bearings (4mm thick)

FEATURES: White plastic construction INCLUDES: One 26T 1st speed gear One 13T input gear REQUIRES: Installation into Traxxas E-Maxx

FEATURES: Nylon Construction           Black in Color   INCLUDES: Three Spur Gears

This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch bell on the engine into the transmission case. The...

Fits Continued: 1/10 Grave Digger 30th / Maximum Destruction / Monster Mutt / Ford Raptor / Rally VXL / Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / T-Maxx Classic FEATURES:...

.

FEATURES: Hardened plastic construction Front or rear application INCLUDES: One left suspension arm One right suspension arm REQUIRES: Installation on suspension assembly SPECS: Length: 100mm (3.94")...

FEATURES: Made from black molded nylon For the Traxxas Stampede and Rustler. SPECS: Length: 3 1/4" Thickness: 3/8" Width at end near chassis: 1 1/2" Width at end near wheels: 7/8" INCLUDES: (2) Front...

Fast, easy and Bluetooth-compatible! Introducing the EZ-Peak Live, the most powerful, most advanced charger ever offered by Traxxas! Compatible with 5-8 cell NiMHs and 2-4S LiPos, the...

FEATURES: Easily holds wires in place & other small items INCLUDES: 10 Black cable ties SPECS: 3 1/16" long (76mm) 3/32" wide (2.5mm)

  This is the 12T 48P Pinion Gear for the Telluride Off-Road Vehicle from Traxxas   FEATURES Hardened steel construction   ...

  This is the 12T 48P Pinion Gear for the Telluride Off-Road Vehicle from Traxxas   FEATURES Hardened steel construction   INCLUDES 12T 48P Pinion Gear with Set Screw

FEATURES: Steel construction   INCLUDES: Three Pinion Gears with set screw

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

.