Traxxas

FEATURES: Nylon construction Black in color INCLUDES: One Servo Arm for Airtronics, KO, and Sanwa One Servo Arm for JR One Servo Arm for Hitec Three Servo Case Mounts REQUIRES: Assembly onto Vehicle

FEATURES: Constructed of steel TiN coated for strength INCLUDES: Two TiN Coated GTR Shock Shafts

FEATURES: Steel construction Self tapping INCLUDES: Six 2.6 x 10mm Round Head Screws by Traxxas REQUIRES: Phillips head screwdriver SPECS: Length: 10mm Diameter: 2.6mm

FEATURES: Painted white Steel construction INCLUDES: Two springs SPECS: Length: 3.11" (79mm) Inside diameter: .61" (15mm) Outside diameter:.71" (18mm)

FEATURES: Anodized aluminum construction, red in color Black nylon ball ends INCLUDES: One 49mm red aluminum rear turnbuckle REQUIRES: Installation onto vehicle

.

FEATURES: Plastic Diff Gear INCLUDES: One 60T gear REQUIRES: Traxxas SRT (Stadium Race Truck) SPECS: Thickness: 8mm (0.31") Diameter: 33mm (1.30")  

FEATURES: One-piece rubber construction slips around mounting area of fuel tank to minimize tank vibration and foaming of fuel INCLUDES: Fuel Tank Vibration Cushion

his is the 7.2V NiMH 1800mAh Stick Battery Pack from Traxxas.FEATURES: Stick configuration          14-gauge...

FEATURES: Steel turnbuckle design 5.0mm diameter INCLUDES: Two front or rear toe links REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 5.1" (129mm)

.

FEATURES: Zinc finish Metal construction INCLUDES: (6) 3X28mm cap head screws (6) lock washers (6) washers (6) split washers SPECS: Length: 1-1/8" (28mm) Diameter: 1/8" (3mm)  

.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Plastic construction INCLUDES: EZ-Start Mount and Clamp with four 2.6x10mm Screws

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Nylon and steel construction INCLUDES: 2 Rod ends 2 Ball studs 2 Hollow balls REQUIRES: Installation at rear suspension

FEATURES: Steel construction INCLUDES: Six 3x30mm Roundhead Machine Screws REQUIRES: Phillips screwdriver SPECS: Length: 30mm Diameter: 3mm

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit. The...

.

FEATURES: Ball bearings reduce friction and last longer than bushings. Double Shielded INCLUDES: One Ball Bearing REQUIRES: None, item is a stock part SPECS: Inner Diameter: 10mm Outer Diameter: 19mm...

FEATURES: Restores proper braking performance INCLUDES: Brake lever, mounting rod, spring, adjustment dial, rod guide bushing REQUIRES: Installing between steering servo and brake assembly

FEATURES: Nylon construction Black in color INCLUDES: Three Crossbraces Twelve 3x6mm Buttonhead Cap Screws Instruction sheet REQUIRES: Installation on the ExoCage

.

This is the Traxxas Power Cell 11.1V 4000mAh 25C 3S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

FEATURES: 1.6 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 49mm (1.9") Diameter: 22mm (0.87")

FEATURES: Nylon construction          Red in colorINCLUDES: Four Pushrods          Eight Hollow Balls

.

FEATURES: Nylon construction           Black in color INCLUDES: One  Spur Gear

These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction Secures...

.

FEATURES: Replaces stock gear shaft. Constructed of steel. INCLUDES: One gear shaft REQUIRES: Diassembly of gearbox and installing shaft between the spur gear and the primary gears.

.

.

This is an optional Traxxas "Long" RPM Sensor, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. To collect critical RPM data (Revolutions Per Minute), a "trigger magnet" is installed...

FEATURES: Plastic construction, black in color INCLUDES: Center half shafts (three internal splined and two external splined) REQUIRES: Installation on the vehicle SPECS: Diameter: 17.2mm (0.68")

.

FEATURES: Three bar ratings: soft, intermediate, and firm Color coded: soft is silver, intermediate is white, and firm is black INCLUDES: Three sway bars COMMENTS: These bars can be used to replace...

.

FEATURES: White plastic construction INCLUDES: One 40T 2nd speed gear One 13T/16T input gear One screw pin REQUIRES: Installation into Traxxas Revo.

FEATURES: Nylon construction          Black in colorINCLUDES: Front and Rear Gearbox Halves

FEATURES: Nylon construction Black in color INCLUDES: One Front Body Mount REQUIRES: Assembly onto Vehicle

FEATURES: Direct drop-in for the Revo 3.3, standard chassis Revos require the Accessory Rear Output Shaft, 9416 Transfers power to the front and rear differentials independently Sealed center...

FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 18mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

FEATURES: Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash Red colored wheel with chrome finish spokes Dual profile beadlock style INCLUDES: Two SCT Split Spoke Wheels in...

These are the 5106A 15 x 24 x 5mm Ball Bearings for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction with black rubber...

This is a pair of Assembled Traxxas SCT S1 Tires and 5-Spoke Wheels. FEATURES Fits the rear of 2WD short course trucks and the front and rear...

.

.

.

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Aluminum construction Gunmetal colored INCLUDES: One Big Bore Long Shock Body. REQUIRES: The remainder of the shock...

FEATURES: Painted white Steel construction INCLUDES: Two springs SPECS: Length: 2.46" (62mm) Inside diameter: .61" (15mm) Outside diameter: .71" (18mm)

.

.

FEATURES: Molded plastic construction INCLUDES: Front and Rear Drive Housing Halves

FEATURES: 2.8" All Star chrome wheels Talon tires and foam inserts INCLUDES: Two 2.8" mounted Talon tires, All Star chrome wheels and inserts REQUIRES: Installation on vehicle SPECS: Outside...

These are the 5106 15 x 24 x 5mm Ball Bearings for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction with blue...

A must have with the recent change to mostly only DC chargers from Traxxas.  Designed specifically for use with the Traxxas peak detecting DC fast chargers, the new AC to DC Adapter from...

FEATURES: Plastic construction Exo-carbon finish INCLUDES: Exo-Carbon Left and Right Suspension Arms for the Traxxas Jato REQUIRES: Installation on the Jato 3.3

FEATURES: Steel construction INCLUDES: Two stub axles REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 1.3" (33mm)

.

.

.

FEATURES: Nylon Construction           Black in Color   INCLUDES: Three Spur Gears

.

Fits Continued: 1/10 Slash R.G.D. / Revo / T-Maxx Features: cap-head aluminum designIncludes 6  2.5x6mm cap-head (sockethead) screws

FEATURES: 5x2mm round magnet INCLUDES: Telemetry Trigger Magnet for the Traxxas TQi Telemetry System

.

FEATURES: Metal Construction Red & silver in color Steel constant-velocity driveshaft INCLUDES: One stub axle and axle sleeve for the Traxxas Revo/T-Maxx REQUIRES: Installation SPECS: Length: 1...