Traxxas

.

This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires Pre-installed...

FEATURES: All wires included in an EZ starting system INCLUDES: One complete Wire Set with connectors Two zip ties One adhesive foam pad

FEATURES: Replaces worn diff carriers gaskets and spacersINCLUDES: Diff Carrier and Gaskets5381 Steel Spider Gear Braces (not used with Revo) Instruction sheetREQUIRES: Disassembly of differential,...

FEATURES: Black metal 3x25mm grub screws. Silver metal 3mm locknuts with nylon inserts. INCLUDES: Eight 3x25mm Grub Screws Eight 3mm Locknuts

Body clip (mounting clip), angled, 90-degrees (black) (10)Accessory part for these models:E-Revo BrushlessE-RevoFord F-150 RaptorFord Fiesta® ST RallyFord RaptorJatoNitro SlashRally VXLRevoRustler...

FEATURES: Composite nylon construction, black in color Install one way and you can secure battery packs up to 21mm in height flip it over and install for battery packs up to 28mm in height Two sets...

LED light harness, rear (requires #2477 wheelie bar mount)Replacement part for these models:Bandit®BIGFOOT® No. 1 Officially Licensed ReplicaRustler®Stampede®Accessory part for these models:Bandit®...

Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)Enhance steering precision, strength, and looks with Traxxas aluminum steering...

.

Turnbuckles, aluminum (orange-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrenchTraxxas’ aluminum turnbuckles make it easy to add strength and...

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)Replacement front bumper for Bandit and 2WD Rustler LED light kits.Replacement part for these...

Rebuild kit, 2200Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x7.5x.19 washer (1), 6x5x15 spacer (1))Replacement...

Heat sink (fits #3351R and #3461 motors)The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on...

FEATURES: Sturdy plastic construction, metal fuel nipple pre-installed and spring loaded cap for fast fill-ups. INCLUDES: 1 assembled fuel tank. SPECIFICATIONS: Length: 2-3/8" Width: 1-7/16"...

FEATURES: Plastic construction Black in color Futaba typecConnectors INCLUDES: One On/Off Switch Harness w/Charge Cord. REQUIRES: Assembly onto Vehicle

There has never been an easier or safer way to charge your batteries than the Traxxas iD® system. Just plug a Traxxas iD-equipped battery into the EZ-Peak® Plus 4s and press Start - that’s all there...

The New EZ Peak Live Dual iD Charger The Most Advanced, Most Powerful, Charger Ever From Traxxas! The new EZ-Peak® Live Dual iD Charger takes all the advanced features of the EZ-Peak Live...

Gear set, metal (for 2085 & 2085X servos)Accessory part for these models:X-Maxx

.

Gear set, metal, high speed (for 2070, 2075 servos)Replacement part for these models:Slash 4X4 UltimateTRX-4 Ford BroncoUnlimited Desert RacerAccessory part for these models:E-Revo VXL...

Accessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton®SummitTRX-4® 1979 Chevrolet® BlazerTRX-4® 1979 Ford® BroncoTRX-4® 2021 Ford® BroncoTRX-4® Equipped...

Servo, sub-micro, waterproofAccessory part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® TetonSummitTRX-4® 1979 Chevrolet BlazerTRX-4® 1979 Ford BroncoTRX-4® Equipped...

Gear set, metal (for 2065R waterproof sub-micro servo)Replacement metal gear set for 2065R servo. Gears do not fit 2065A or 2065X servos.Accessory part for these models:1/18 Ford® Bronco®1/18 Land...

FEATURES: Plastic waterproof blue case 80 oz-in torqueTransit time 0.23 sec/60° INCLUDES: One high torque waterproof servo with J style connector SPECS:    Length: 2.16"...

Fits Continued: 1/10 Nitro Slash / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Revo / T-Maxx / Slayer Pro 4x4 / Nitro Rustler / T-Maxx Classic FEATURES: Black plastic...

 These nylon wheels are lightweight and strong, which makes them perfect for racing. The dished wheels also repel dirt and mud and can be dyed any color. Includes: 2 white nylon 2.2 inch rear...

The Mini Maxx® LED front bumper incorporates a bright white LED light bar for forward illumination. This is a standard replacement for the LED front bumper used in the 10795 Mini Maxx LED Light Kit...

The Mini Maxx® LED roof skid features white lights in the front with red in the back to enhance rear visibility. This is a standard replacement for the roof skid used in the 10795 Mini Maxx LED Light...

Replacement Mini Maxx® rear planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear.Replacement part for these models:Mini Maxx®

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Large 4″ Sledgehammer front tires are ready for action with multiple layers of biting edges for sure-footed traction. Their open-block tread design clears away mud and debris and features a...

Replacement Mini Maxx® GTR shock springsReplacement part for these models:Mini Maxx®

The all-metal Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential features a 47-tooth, 32-pitch, steel...

The Mini Maxx® center differential absorbs driveline shocks to improve durability and distribute power evenly for maximum acceleration. The differential includes a factory-installed 47-tooth,...

Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762...

Use this short driveshaft when installing the optional 10758 slipper clutch or 10760-series center differential. When using the short driveshaft, you must also use differential pinion gear 10762...

Left and right aluminum stub axle carriers boost the appearance and strength of your Mini Maxx®. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with a brilliant...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Take your Mini Maxx® to the next level with this aluminum battery hold-down. The billet 6061-T6 aluminum construction adds strength and precision with a brilliantly anodized finish. Genuine Traxxas...

Add extra color to your Mini Maxx® with this heavy-duty roof skid plate and tailgate protector. Made from our toughest composite material, they protect your Mini Maxx's body during rollovers...

Give your 4-Tec® 2.0 extra style points with this underbody LED light kit. Perfect for track competitions or parking lot honing, the underbody LED light kit casts a colorful glow underneath the car...

Bumper, front (upper (1), lower (1))Replacement part for these models:Slash® Modified

Body washers (2)/ roof washers (5)/ 3x10mm CCS (7) (fits #10411 body)Replacement part for these models:Slash® Modified

Replacement tires and wheels for the 10350 boat trailerReplacement part for these models:Traxxas Boat Trailer

Replacement quick-release motor collet includes 4x3 stainless grub screw with applied thread lock and 10 mm wrenches (2)

Set of four replacement hatch wingnuts

Large 5.3″ diameter Maxx® SC belted tires feature wide tread blocks for sure-footed traction on just about any surface. The innovative belted design combines with a long-wearing rubber compound for...

Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish...

Left and right extended lower shock mounts mount to the suspension arms to increase suspension down travel.Replacement part for these models:Maxx® Slash®

Take your Maxx® Slash® to the next level by replacing the stock front chassis brace with this heavy duty aluminum upgrade. Made from tough 6061-T6 aluminum and brilliantly anodized in high-impact...

Is it time to upgrade your Maxx® Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled...

Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to eliminate play. The...

Replica Raptor R™ hood vent clipless body mount and latches with 3x8 mm screws (5) (fits 10111-series bodies)Replacement part for these models:Ford® F-150® Raptor R™ 4X4

Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications. The out-of-the-box spur gear is a 36-tooth.   FEATURES: Nylon...

FEATURES: Stock motor supplied with the Traxxas Stampede and Rustler series          Preinstalled leads, capacitors and connectors INCLUDES: Traxxas Titan...

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit. The...

FEATURES: Pistol-style grip Steering trim knob Set button Power switch on base of unit INCLUDES: one transmitter REQUIRES: Four AA batteries SPECS: Overall, height: 8-3/8" (210mm) width: 3" (76mm)...

Body, Ford Bronco, complete, gray (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) (requires #9735 front & rear...

FEATURES: Stock replacement wheels Plastic construction with black chrome finish 17mm splined hex for greater degree of grip and less chance of slippage INCLUDES: Two Split Spoke Front...

FEATURES:100-Watt outputRecognizes Traxxas iD® batteries to automatically program and optimize charger settingsCharge a NiMH and LiPo at the same timeCharge progress indicatorOptimized for faster...

Body, Slash® 4X4, red (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting)Older Slash chassis without clipless mounts will require 6940 (Slash 2WD) or...

Body, Sledge®, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, X-Maxx® Ultimate, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix X-Maxx body comes fully trimmed and ready to paint with decal sheet...

Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

Body, X-Maxx® Ultimate, blue (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts will...

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)Older Slash chassis without clipless mounts...

Body, Slash® 2WD, ProGraphix® (also fits Slash® VXL & Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash body comes fully trimmed...

Painted, Decals Applied Green/Blue Body w/ Wing for Bandit & Bandit VXL

Painted, Decals Applied Orange/Blue Body w/ Wing for Bandit & Bandit VXL

Body, Bandit®, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Bandit body comes fully trimmed and ready to paint with decal sheet,...

Painted, Decals Applied Blue Body w/ Wing for Bandit VXL

Body, Bandit® VXL, ProGraphix®/ wing (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Bandit body comes fully trimmed and ready to paint with decal...

Body, Ford Mustang, complete (red) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, Ford Mustang, complete (green) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, Ford Mustang, complete (copper) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, Ford Mustang, complete (blue) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, Ford Mustang, complete (black) (painted, decals applied) (includes side mirrors, spoiler, grilles, vents, & clipless mounting)

Body, TRX-4® Sport, complete, red (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)

Body, TRX-4® Sport, complete, gray (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)

Body, TRX-4® Sport, complete, blue (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)

Body, TRX-4® Sport (clear, trimmed, die-cut for clipless mounting, requires painting)/ window masks/ decal sheetThe clear TRX-4 Sport body comes fully trimmed and ready to paint with decal sheets,...

Body, XRT®, Rock n' Roll (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix XRT body comes fully trimmed and ready to paint with decal sheet and...

Body, XRT® Ultimate, green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT® Ultimate, blue (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, black (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix XRT body comes fully trimmed and ready to paint with decal sheet and...

Body, XRT®, orange (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, red (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, green (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

Body, XRT®, blue (painted, decals applied) (assembled with front & rear body supports for clipless mounting, roof & hood skid pads)

This clipless heavy-duty clear Slash® 4X4 body is made from thicker polycarbonate than standard bodies for increased durability. From mild to wild, Traxxas clear bodies are your own personal canvas...

Body, Slash® 4X4, ProGraphix® (also fits Slash® VXL & Slash® 2WD) (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Slash 4X4 body comes fully...

Body, Stampede® 4X4 Brushless, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Stampede 4X4 body comes fully trimmed and ready to paint...

Body, Stampede® 4X4 Brushless, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, Stampede® 4X4 Brushless, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, Stampede® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetThe ProGraphix Stampede 4X4 body comes fully trimmed and ready to paint with decal...