Traxxas

.

 

 

 

Extension harness, LED lights (high-voltage)Accessory part for these models:X-Maxx®

.

 

 

 

 

 

Body, X-Maxx®, Red (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)Replacement part for these models:X-Maxx®

Body, X-Maxx®, Orange (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)Replacement part for these models:X-Maxx®

Center drive, torque-biasing (assembled)/ 17x26x5 ball bearings (2) (requires #7727X bulkheads)

.

.

Heavy duty steel 35-tooth ring gear for X-Maxx front or rear differential. For use with #7790 or #7791 11-tooth heavy duty differential pinion gear.

Heavy duty steel 11-tooth pinion gear for X-Maxx rear differential. For use with #7792 35-tooth heavy duty differential ring gear.

Heavy duty steel 11-tooth pinion gear for X-Maxx front differential. For use with #7792 35-tooth heavy duty differential ring gear.

  This is the Slipper Clutch Rebuild Kit for the Traxxas X-Maxx Monster Truck       FEATURES Restores like-new performance...

This is the Slipper Pressure Plate and Hub for the Traxxas X-Maxx Monster Truck     FEATURES Cast metal construction Installs on...

.

.

.

Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

FEATURES Steel and aluminum construction   INCLUDES Two each; Shafts and Aluminum...

FEATURES Hardened steel construction   INCLUDES Two Output Gears Four Spider Gears Two...

Aluminum differential carrier for X-Maxx. Compatible with Torque-Biasing Center Drive™ and front and rear differentials. Requires #7783X spider gear shaft.

FEATURES Molded composite plastic construction   INCLUDES Differential Carrier Two X-Ring...

FEATURES Molded composite plastic construction Fastens to front and rear bulkheads and protects differential assembly from dirt   ...

FEATURES Hardened steel construction Fits front and rear differentials   INCLUDES Ring Gear

FEATURES Hardened steel construction   INCLUDES Pinion Gear for Rear Differential

Assembled X-Maxx wheelie bar. Includes ball bearing wheels. Direct bolt-on to all X-Maxx models.

X-Maxx red-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft (#7750X) only.

Stub axle, aluminum (green-anodized) (1) (use only with #7750X driveshaft)

X-Maxx blue-anodized aluminum stub axle. For use with 8s-spec heavy duty driveshaft (#7750X) only.

FEATURES Steel construction   INCLUDES Two Shock Springs   ...

 

FEATURES Aluminum construction, anodized red in color All shock components mount inside or attach to this body   ...

.

Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers (8)

.

FEATURES Molded composite plastic construction Steel ball link inserts in shock caps   INCLUDES ...

.

This is a pair of GTX Shocks for the Traxxas X-Maxx FEATURES Aluminum bodies, anodized color Fully assembled, springs not included ...

Shocks, GTX, aluminum (black-anodized) (fully assembled w/o springs) (2)Accessory part for these models:X-Maxx

This is a pair of GTX Shocks for the Traxxas X-Maxx FEATURES Aluminum bodies, anodized color Fully assembled, springs not included ...

FEATURES Two-piece molded composite plastic construction Attaches to rear bulkhead and fastens to both ends of motor   ...

 

 Washers, motor mount, aluminum (green-anodized) (4)/ 4x18mm BCS (4)

FEATURES Aluminum construction, anodized red in color Threads onto stub axles to hold wheels in place   ...

FEATURES Aluminum construction, anodized green in color Threads onto stub axles to hold wheels in place   ...

Wheel nuts, splined, 17mm, serrated (black-anodized) (4)Accessory part for these models:X-Maxx

FEATURES Aluminum construction, anodized blue in color Threads onto stub axles to hold wheels in place   ...

FEATURES Steel construction Snaps onto groove of each stub axle to hold wheel hub and uprights in place   ...

 

Drive cup (1)/ 3x8mm CS (use only with #7750X driveshaft) X-Maxx drive cup with 3x8mm CS hardware. For use with 8s-spec heavy duty driveshaft (#7750X) only.

Rebuild kit for use with #7750X heavy duty X-Maxx driveshaft. Kit includes pins for 2 driveshaft assemblies.

Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, #7768R, or #7768G) X-Maxx steel constant-velocity driveshaft for...

 

Toe links, X-Maxx (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) Accessory part for these...

Toe links, X-Maxx (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) Accessory part for these...

Toe links, X-Maxx (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) Accessory part for these...

This is a pair of Toe Links for the Traxxas X-Maxx Monster Truck     FEATURES Molded composite plastic construction with steel ball...

FEATURES Molded composite plastic construction   INCLUDES Servo Horn Steering Linkage with...

Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)Accessory part for these models:X-Maxx

FEATURES Molded composite plastic construction Steel servo saver spring   INCLUDES Two...

FEATURES Molded composite plastic construction Reduces damage to underside of chassis and other components during chassis bottoming   ...

FEATURES Molded composite plastic construction Reduces damage to underside of chassis and other components during chassis bottoming   ...

FEATURES Molded composite plastic construction Installs with inner suspension pins on upper suspension arms to hold pins in place   ...

FEATURES Steel construction Fastens bottom of shocks to lower front and rear suspension arms   INCLUDES ...

FEATURES Steel construction Fastens lower rear suspension arms to chassis   INCLUDES Two...

This is the Front or Rear Corner Suspension Pin Set for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction Fastens...

This is the Front Shock Tower for the Traxxas X-Maxx Monster Truck     FEATURES Two-piece molded composite plastic construction, dark...

FEATURES Molded composite plastic construction   INCLUDES Rear Bumper   ...

FEATURES Molded composite plastic construction Supports the driveshaft and stub axles, and is held in place by the upper and lower suspension...

FEATURES Molded composite plastic construction Fits lower left front suspension Fastens to lower section of caster block and front lower...

FEATURES Molded composite plastic construction Fits lower right front suspension Fastens to lower section of caster block and front lower...

FEATURES Molded composite plastic construction Fits both front and rear suspension   INCLUDES ...

FEATURES Steel construction Mounts upper and lower bulkhead halves in place   INCLUDES One...

FEATURES Replaces damaged or missing receiver box seal and cushions Silicone grease helps to seal receiver box to chassis   ...

FEATURES One-piece molded composite plastic construction Separate molded compartments for ESC, batteries and more   ...

FEATURES One-piece molded composite plastic construction Holds the steering, differential, skidplate and lower control arm assemblies   ...

FEATURES Molded composite plastic construction with thin foam strip to cushion battery Holds both batteries in place on the top chassis...

Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2) 

    FEATURES One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and...

These are the Front and Rear Body Mounts for the Traxxas X-Maxx Monster Truck     FEATURES One-piece molded composite plastic...

.

X-Maxx tailgate protector, insert, and 3x8mm flathead hardware. Provides additional strength for rear and corners of X-Maxx for added durability.

X-Maxx ProGraphix Body w/ Decal Sheet - Pre-cut  

Body, X-Maxx®, Rock n' Roll (painted, decals applied) (assembled with tailgate protector)

X-Maxx Clear Body w/ Decal Sheet - Pre-cut Requires: Paint

Body reinforcement set (fits #7711 body)Accessory part for these models:X-Maxx

Tires and wheels, assembled, glued (SCT red wheels, SCT off-road racing tires)                                 ...

Tires and wheels, assembled, glued (SCT orange wheels, SCT off-road racing tires)                              (1 each,...

Tires and wheels, assembled, glued (SCT blue wheels, SCT off-road racing tires) (1 each, right & left)Replacement part for these models:1/18 LaTrax Desert PreRunner 

Wheel nut washer, machined aluminum, red / 3x12mm CS (4)