Traxxas

.

FEATURES: Steel construction Phillips drive Flanged pan head INCLUDES: (6) Screws SPECS: Diameter: 3mm Length: 8mm  

FEATURES: The collars are made of aluminum The set screws are made of durable metal INCLUDES: (2) screw collars (2) 3mm set screws

FEATURES: stainless steel construction phillips drive replacement screws used on the Traxxas LS-II INCLUDES: (6) Screws SPECS: Size: 3x12mm COMMENTS: when screwed-in the head of the screw is usually...

FEATURES: Metal construction Countersunk (flat head) machine screws Phillips drive insert Replacement parts designed for the Traxxas Nitro Hawk INCLUDES: Six Screws SPECS: Length: 10mm Diameter: 3mm

FEATURES Plastic constructionPrewired On/Off switch   INCLUDES 4-Cell AA Battery Holder with On/Off Switch

.

INCLUDES: 2 pieces of fuel tubing. SPECIFICATIONS:  Length: each piece is 6" long Inside diameter: 2mm

FEATURES: Aluminum construction Anodized Red INCLUDES: Two assembled turnbuckles REQUIRES: Installation, 5mm Wrench

FEATURES: Aluminum construction Anodized Blue INCLUDES: Two assembled turnbuckles REQUIRES: Installation, 5mm Wrench

.

Electronic Speed Control, LaTrax®, waterproof (assembled with bullet connectors)Replacement part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Teton

FEATURES: Nylon construction Black in color INCLUDES: One 4 cell AA Battery Holder w/Futaba Connector REQUIRES: Assembly onto Vehicle

This high quality five-cell receiver battery pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1-2 hours of run time. Heavy-duty wiring provides...

.

.

.

FEATURES Connects receiver batteries to chargers with molex output connector   INCLUDES Molex to Receiver Pack Charge Adapter   SPECIFICATIONS Length: 2.8" (71mm) not...

XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)

Battery/charger completer pack (includes #2969 2-amp NiMH peak detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH battery (1))   Traxxas 7-Cell NiMH battery and 2-Amp AC charger for...

This is the Traxxas DC Powered 2 Amp NiMH Battery Charger. FEATURES Charges 5-6 cell, 6.0-7.2V NiMH batteries only (will not charge LiPos) LED...

  This is the Traxxas AC Powered EZ-Peak Plus Battery Charger with iD Auto Battery Identification. FEATURES Charges 2-3S LiPo...

Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)

FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings MAXX...

FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers...

This is the Traxxas 7-Cell 8.4V 4200mAh 4 Series iD Power Cell NiMH Stick Battery Pack. FEATURES New high current connector with gold-plated...

This is the Traxxas 6-Cell 7.2V 3300mAh iD Power Cell NiMH Stick Battery Pack. FEATURES New high current connector with gold-plated copper...

Adapter, Traxxas iD LiPo battery (adapts Traxxas iD batteries to separate balance ports) Traxxas Balance Lead Adapter enables customers to connect their Traxxas iD batteries to accessory cell...

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

This is the Traxxas Power Cell iD 7.4V 5800mAh 25C 2S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve...

This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

Features: Grey right and left rear suspension arm mounts These are +/-1° SPECS: Thickness: .23" (6mm) Height: 1.22" (31mm) Width: .82" (21mm)

Features: 2 white dyeable nylon susp. arm mounts These are +1° or -1° degrees You can flip them around for either setting . Optional: Traxxas has 0° degree blocks Part #6797

Features: 2 white dyeable nylon susp. arm mounts These are 0° degrees Optional: Traxxas has +1°/-1° degree blocks part #6798

Fits Continued: 1/10 Nitro Stampede / Nitro Rustler Includes: 2- Chrome plated Rear shock shafts.

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler INCLUDES: 4- stub axle pins

FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS: Length: 1.65" (42mm) Diameter: .51" (13mm) at largest point

INCLUDES:   6- internal splined shafts(female universals)  6- external splined shafts(male universals) REQUIRES: Does not include the metal u-joint balls and pins.

Fits Continued: 1/10 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler / T-Maxx Classic Kit includes: 6ea 5.8mm metal balls 6ea 5.8mm white nylon ball ends

PACKAGE INCLUDES: 48mm Rear inner hinge pin (2) 31.5mm Front and rear outer hinge pin (4) 39mm Front inner hinge pin (2) 23mm Pins ("king pins") for the steering blocks (or "knuckle arms") (2) 3mm...

.

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash  / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE INCLUDES: 2-Bearings SPECS: 5x8x2...

FEATURES: Steel construction, silver in color INCLUDES: Six 3x12mm Roundheaded Self Tapping Screws SPECS: Length: 12mm Diameter: 3mm  

Fits Continued: 1/10 Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE INCLUDES: 1-Spring Retainers 2-Spring Adjustors 4-Spring...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic PACKAGE CONTAINS: 2-Caps FEATURES: Round aluminum caps with threaded inside COMMENTS: Rubber...

.

Traxxas Big Bore shocks provide ultimate damping control. They’re hard-anodized, PTFE-coated and have large cylinders for greater oil capacity. These shocks also include our super...

FEATURES: Pre-assembled shocks only require filling with included oil, attaching included spacers and included springs. Big-bore long shocks are hard-anodized and coated T-6 aluminum. INCLUDES: Two...

PACKAGE INCLUDES: 5- E rings (aluminum) 2- Suspension pins (hard chrome) These are the long pins SPECS: Length: 2" (48mm) Thickness: 1/8" COMMENTS: The suspension pins are used with the suspension...

FEATURES: Steel construction, silver in color Replaces worn or damaged suspension pins INCLUDES: Two Suspension Pins Four 3mm E-Clips REQUIRES: Installation following the model manual SPECS: Length:...

FEATURES: Made of white nylon For 25° caster INCLUDES: One left caster block One right caster block COMMENTS: These castor blocks mount onto the front A-arms and the steering blocks mount onto...

FEATURES: Made of white nylon For 30° caster INCLUDES: One left caster block One right caster block COMMENTS: These castor blocks mount onto the front A-arms and the steering blocks mount onto...

FEATURES: Metal construction Black in color INCLUDES: Six 3 x 40mm button-head hex machine screws REQUIRES: Installation on the vehicle

FEATURES: Metal construction Black in color INCLUDES: Six 3 x 23mm Button-head Hex Screws REQUIRES: Installation on the vehicle

FEATURES: Steel construction. Phillips drive insert. Countersunk head for a smooth flush surface when installed. INCLUDES: (6) Screws SPECS: Diameter: 3mm Length: 20mm

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm cap head screw is required INCLUDES: Six 3x15mm Traxxas Cap...

FEATURES: Black steel construction INCLUDES: Six 3x15mm cap head machine screws REQUIRES: 2.5mm ball driver or hex wrench

This is a 6 pack of 3X30mm Button Head Screws. FEATURES: Steel construction Black in color Button head design INCLUDES: (6) 3X30mm button head screws SPECS: Length: 1-3/16" (30mm) Diameter: 1/8" (3mm)

FEATURES: Black steel construction INCLUDES: Six 3x25mm Button Head Machine Screws REQUIRES: 2mm hex wrench SPECS: Length: 25mm Diameter: 3mm

This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x20mm...

FEATURES: Steel construction INCLUDES: Six 4x15mm Round Head Screws REQUIRES: Phillips screwdriver SPECS: Length: 15mm (0.59") Width: 4mm (0.16")  

FEATURES: Steel construction INCLUDES: Six 3x23mm Roundhead Screws REQUIRES: Phillips screwdriver SPECS: Length: 23mm (0.90") Diameter: 3mm

FEATURES: Steel construction Silver in color INCLUDES: Six 3x15mm Roundhead Screws REQUIRES: Phillips screwdriver SPECS: Length: 15mm (0.59") Width: 3mm (0.12")

FEATURES: Steel construction INCLUDES: Six 3x6mm Roundhead Machine Screws REQUIRES: Phillips screwdriver SPECS: Length: 6mm Diameter: 3mm

.

Fits Continued: 1/10 Maximum Destruction / Grave Digger 30th / Monster Mutt / Rally VXL / Nitro Jato 3.3 / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Black steel construction. INCLUDES:...

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a...

FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas...

FEATURES: White plastic contruction INCLUDES: Three bellcrank arms REQUIRES: Remainder of bellcrank steering system COMMENTS: These arms are unique in shape and will only work with the above...

FEATURES: Metal construction Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

FEATURES: Steel Shafts INCLUDES: One 20mm Shaft One 25mm Shaft One 44mm shaft REQUIRES: Installation on vehicle

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES:...

FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins (TRAC4940) SPECS: Length: 98.4 mm (3.875") Width: 7.9 mm (0.3125") Thickness: 2.0 mm (0.082")

FEATURES: Nylon construction Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS: Length: 3" Width: 1.2" COMMENTS: This will work on the Bandit, Nitro...

Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" wheels. Available in mirror chrome...

Anaconda 2.2" performance street tires feature a unique rubber compound which provides incredible traction and long tread life. They come pre-glued to Tracer 2.2" wheels. FEATURES: Rubber Anaconda...

ANACONDA 2.2" TIRES: Anaconda 2.2" performance street tires provide exceptional wear and sticky traction for high-speed asphalt action. Fits Traxxas and other standard 2.2" buggy wheels. FEATURES:...

FEATURES: Rubber Anaconda tires Split X-Pattern tread Foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Anaconda 2.2" tires REQUIRES: Installation on the Bandit SPECS: Overall Diameter:...

FEATURES; Pre-Molded White Plastic Wheels Cone-Dish Design Dyeable White Plastic INCLUDES: 2-Front Wheels SPECS: 2.2" Diameter 3/4" wide REQUIRES: Customer will need to purchase front tires...

Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias ribbed 2.2" tires) (2) (Bandit front, soft compound w/ foam inserts) Alias 2.2" soft compound tires come assembled with foam inserts...

FEATURES: Rubber Alias tires Ribbed pattern tread Medium compound with foam inserts INCLUDES: Two Tracer 2.2" black chrome wheels with Alias 2.2" tires REQUIRES: Installation on the Bandit SPECS:...

FEATURES: Alias ribbed tires For use on front of buggy Soft compound INCLUDES: Two Traxxas Alias Ribbed 2.2" tires REQUIRES: Wheels Tire Glue SPECS: Inner Diameter: 2.2" (55.8mm) Outer Diameter: 3...

FEATURES: Medium compound firmness rated tires with rectangular tread Five spoke chrome wheels INCLUDES: Two Alias 2.2 Tires with Foam Inserts and Tracer Wheels SPECS: Width: 1.7" (43mm) Outer...

.

FEATURES: Alias ribbed tires For use on rear of buggy Soft compound INCLUDES: Two Traxxas Alias Ribbed 2.2" tires REQUIRES: Wheels Tire Glue SPECS: Inner Diameter: 2.2" (55.8mm) Outer Diameter: 3.54"...

Includes: Two front springs Features: Sturdy steel construction Durable black finish Specs: 2" long (uncompressed) .75" diameter Requires: The rest of the shocks

.

.

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 55mm (75mm center to center) turnbuckles with instruction sheet REQUIRES: Installation on the...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two front 47mm (67mm center to center) turnbuckles REQUIRES: Installation on the vehicle

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two rear 36mm (56mm center to center) turnbuckles REQUIRES: Installation on the vehicle

This is the Camber Link Set in Gray for the 1/10 scale Traxxas Bandit. FEATURES Plastic construction, gray in color Non-adjustable ...

FEATURES: Black plastic camber links Two 2.56" (65mm) Two 3" (76mm) INCLUDES: Four camber links REQUIRES: Traxxas bandit SPECS: Thickness: 4mm COMMENTS: Camber links is another name for tie-rods.

FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts. SPECS: Length: 0.94" (24mm)...

.

.

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw