Traxxas

.

FEATURES: Steel construction, gun metal in color Replaces a worn or damaged idler gear INCLUDES: One 13 Tooth Idler Gear (first speed gear) REQUIRES: Installation

Includes: LED lights, chassis harness (4 clear lights, 2 red lights) (1)/wire tie (3) Requires: power supply #7286

FEATURES: Plastic construction Black in color INCLUDES: One Rear Bumper. REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction           Black in color INCLUDES: Three Spur Gears

.

FEATURES: Steel construction Round head with phillips drive insert INCLUDES: Six screws SPECS: 3mm thread size 20mm long

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Aluminum construction Gunmetal colored INCLUDES: One Big Bore XXL Shock Body...

.

FEATURES: Metal construction White in color Damper rating 1.3 INCLUDES: Two Super Shock Springs Gold 1.3 REQUIRES: Assembly onto Vehicle

.

The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily installs onto the rear of any electric Slash, Rustler, Stampede, and Bandit. The...

FEATURES: Gray plastic construction "Long Travel" raised lettering on top of the rocker arms INCLUDES: (8) rocker arms, Part #5356 REQUIRES: Installation on the Traxxas Revo SPECS: Length: 2" (52mm)...

FEATURES: Metal construction INCLUDES: (12) Washers SPECS: Size: 3x6mm

These are the 4x15mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck     FEATURES Steel construction   ...

Includes: 2- 26mm Hard chrome suspension ("hinge") pins. 4- 3mm E-rings.

This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.   FEATURES Semi rigid construction does not require a hard case and...

.

FEATURES: 0.12" (3mm) thick 6061 aluminum, dark titanium in color INCLUDES: XO-1 Chassis  

FEATURES: Replaces stock output shafts, constructed of steel. Spacer is made of plastic. INCLUDES: One output shaft and spacer REQUIRES: Installing shaft in gearbox between the clutch bell and output...

FEATURES: Black nylon construction INCLUDES: One upper rear and one lower right rear suspension arm REQUIRES: Removing stock suspension arms Adjusting camber and toe after installing Adjustable...

FEATURES: Aluminum construction, anodized blue in color INCLUDES: Motor Mount with Instruction Sheet

Fits Continued: 1/10 Nitro Sport / Nitro Stampede / Nitro Rustler Package includes: 2ea aluminum shock caps Specs: diameter- 14mm height- 17mm

.

FEATURES: Made of stainless steel This is used to hold the front steering block (TRAC9036 #3636) to the castor block (TRAC9032 #3632) on the electric (not Nitro) Rustler Also called the vertical...

This is the Replacement Battery Door for the 2.4GHz Transmitter for the LaTrax Alias Quad-Copter Includes: 1 x Battery Door

FEATURES: Aluminum Construction, hard anodized coated Threaded for Easy Adjustment INCLUDES: One hard anodized Threaded Aluminum GTR Shock Body REQUIRES: Assembly onto Vehicle Parts to Complete Shock...

Split-Spoke 3.8" wheels for Revo & Maxx trucks add another dimension of style and performance. Available in black-chrome, mirror-chrome and satin finish, Traxxas Split-Spoke wheels...

EATURES: Cast aluminum construction INCLUDES: One manifold REQUIRES: Nothing. This is a direct replacement part. SPECS: Outlet inner diameter: 11mm (0.43") Engine side inner diameter: 13mm (0.51")

Damper balls, anti-vibration, gimbal (4) (yellow dot)/ camera mount (4) for Traxxas Aton

.

This is the Servo Case and Gaskets for the Steering Servo used on the Traxxas X-Maxx Monster Truck     FEATURES Replaces damaged case...

FEATURES: Steel construction   INCLUDES: Three Pinion Gear with set screw

.

FEATURES Molded plastic composite construction   INCLUDES Left and Right Stub Axle Carriers

 

FEATURES: Blue and Grey in Color Rubber and Nylon Construction INCLUDES: Two Rubber Diaphragms Four Shock Pistons Two Shock Ends Two Ball Ends Two Rubber O-Rings REQUIRES: Installation into Shocks.

Fits Continued: 1/10 4-Tec  / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic   Includes: 4 short rod ends (17mm) 16 long rod ends (19mm) 2 ball...

.

FEATURES: Molded plastic construction INCLUDES: Center Bearing Carrier

FEATURES: Aluminum construction          Blue in colorINCLUDES: One Front Bulkhead Tie Bar          One Rear...

.

Fits Continued: 1/10 Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Molded Composite Gray in Color INCLUDES: (2) Bodies REQUIRES: Installation SPECS: Length: 1.777" (45.1mm)...

  This is the Center Gear Box (Transmisssion) (Front & Rear halves) for the REVO from Traxxas.   FEATURES Durable black nylon construction   INCLUDES One center gear...

FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm One right suspension arm REQUIRES: screw pins for installing SPECS: Length: 3-5/8"

.

.

FEATURES: Silver metal construction Round head machine screws Phillips drive INCLUDES: Six Screws. SPECS: Length: 8mm Diameter: 2.6mm

FEATURES: Steel construction Rubber sealed INCLUDES: Two Ball Bearings REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 27mm (1.06") Inner Diameter: 20mm (0.79") Width: 4mm (0.16")

FEATURES: Steel construction, silver in color Used on the Traxxas Revo monster truck, can also be used in any application where a 2x6mm roundhead self tapping screw is required INCLUDES: Six 2x6mm...

.

 

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

Fits Continued: 1/10 Ford Raptor / Rally VXL / Slash R.G.D. / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / T-Maxx / Nitro Rustler / T-Maxx Classic FEATURES: Black nylon rod ends Steel...

FEATURES: Black Steel springs INCLUDES: Two Springs REQUIRES: Installing on Traxxas Street Sport Shocks SPECS: Length: 25.4 mm (1") Diameter: 18.6 mm (0.731")

.

.

FEATURES: Nylon Construction Black in Color INCLUDES: One Left Rear Suspension Arm One Right Rear Suspension Arm REQUIRES: Assembly onto Vehicle

FEATURES: Plastic construction Gray in color Progressive 1, Low Rate INCLUDES: One Left/Front Upper Rocker Arm One Left/Front Lower Rocker Arm One Right/Front Upper Rocker Arm One Right/Front Lower...

FEATURES: Black Plastic Construction INCLUDES: Two Wedges REQUIRES: Traxxas 4-TEC SPECS: Length: 20mm (.787") Width: 7mm (.275") COMMENTS: None

.

.

.

These are the 4x35mm Button Head Machine Screws for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Steel construction Secures...

.

FEATURES: Nylon and steel construction INCLUDES: 2 Rod ends 2 Ball studs 2 Hollow balls REQUIRES: Installation on front suspension

FEATURES: Nylon Construction          Black in Color   INCLUDES: One Spur Gear

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against...

FEATURES: Replaces worn bearings Constructed of steel INCLUDES: Two 6x12x4mm Ball Bearings for the Traxxas T-Maxx Monster Truck REQUIRES: Installing two bearings in each axle carrier (4932) and two...

This is the Main Diff with Steel Ring Gear from Traxxas for the Bandit, Stampede and Rustler VXL series. Includes: Main diff with steel ring gear Side cover plate Screws Instructions Requires:...

FEATURES Hardened steel construction   INCLUDES Pinion Gear for the Front Differential

FEATURES: Nylon construction Black in color INCLUDES: One Left and Right 25° Caster Blocks One Left and Right 25° Steering Blocks REQUIRES: Assembly onto Vehicle

.

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Ford Raptor / Slash R.G.D. / Nitro Jato 3.3 / Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler FEATURES: Aluminum...

FEATURES: Steel construction   INCLUDES: One Pinion Gear with set screw

FEATURES: Steel construction Nylon locking insert Silver in color INCLUDES: Twelve 2.5mm nuts REQUIRES: 5mm open-end or four-way wrench for assembly. SPECS: Nut Hex size: 5mm (.20") Internal thread...

This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of changes, and preventing overheating. The...

This is a tube of white lithium grease from Traxxas. This is used to lubricate gears and differential components.

FEATURES: 1.4 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 51mm (2") Diameter: 21mm (0.83")

FEATURES: Thicker steel construction. INCLUDES: Two turnbuckles with pre-installed rod ends and balls. REQUIRES: Nothing. These are direct replacement rods. SPECS: Length: 118mm (4.65") Thickness:...

#5339 Insert, threaded steel (replacement inserts for TUBES) (includes (1) left and (1) right threaded insert) Insert, threaded steel (replacement inserts for TUBES) (includes (1) left and (1) right...

FEATURES: Red in color (small gold square indicates spring type) Metal construction INCLUDES: 2 springs SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16" (17mm) Outside diameter: 7/8" (22mm)...

FEATURES: Replaces damaged or worn clutch bells Constructed of steel INCLUDES: One Forward and Reverse Clutch Bell for the Traxxas T-Maxx REQUIRES: Diassembly of transmission and installing on output...

.

.

.

.

**This conversion kit requires a 3-channel transmitter to shift gears.** FEATURES: Everything needed to convert the E-Revo transmission to two speed shifting Provides more torque for climbing and...

.

.

.

FEATURES: Durable steel construction INCLUDES: Two 13 Tooth Output Gear Shafts Two 13 Tooth Spider Gears One Spider Shaft One 6x10x0.5mm washer REQUIRES: Assembly into differential COMMENTS: This set...

This is thrust bearing lube that can be used on all the Traxxas kits as well asmost other kits on the market.  It is to be used on thrust bearings, and not onball diffs or planetary diffs. ...

FEATURES: Ten spoke chrome plated plastic construction, spokes are in groups of two Fits front or rear of vehicle INCLUDES: Two optional Traxxas Split Spoke 3.8" Chrome Wheels w/17mm Hub...

FEATURES: Hard anodized aluminum Machine thread INCLUDES: Four threaded ball studs REQUIRES:2.5mm hex driver SPECS: Length:14mm(.56") Ball Diameter:6mm Threaded Diameter:3mm

FEATURES: Metal Construction Silver in Color Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

FEATURES: Nylon construction Black in color INCLUDES: One Front Bumper One Bumper Mount Two 3x25mm Button Cap Screws Two 4x10mm Button Cap Screws REQUIRES: Installation on the vehicle

FEATURES: Nylon construction          Black in color          Fits left or rightINCLUDES: Two Internal...

FEATURES: Nylon Construction Silver Bumper and Black Mount INCLUDES: One Silver Nylon Front Bumper One Black Nylon Front Bumper Mount Two 3mm x 25mm Cap Hex Head Machine Thread Screws Two 4mm x 10mm...