Traxxas

LED lights, light harness (4 clear, 4 red)/ bumpers, front & rear/ wire ties (3) for the 1/16 E-Revo /E-Revo Brushless. (requires power supply #7286)

FEATURES: Hardened steel construction INCLUDES: Two Output Gears Two Spider Gears One Spider Gear Shaft One Carrier Support

Tires, Maxx® 2.8" (2)/ foam inserts (2)Replacement part for these models:Stampede 4X4Accessory part for these models:Bigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed...

Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)

FEATURES: Rear tires 2.2" Satin Chrome Wheels Off-Road Racing Tires 5 spoke design INCLUDES: Two 2.2" mounted Off-Road Racing Tires, Satin Chrome Wheels Foam Inserts REQUIRES: Installation on...

.

FEATURES: Black steel and natural aluminum construction INCLUDES: One Primary Shaft, one One-Way Bearing, one Snap Ring, & one spacer REQUIRES: Installing in gear box

This is the Aluminum Exhaust Header Spring Mount for the Traxxas 2.5, 2.5R and 3.3 Engines. FEATURES Aluminum construction Silver in...

FEATURES: Plastic construction Black in color INCLUDES: One Roll Hoop (Roll Bar) One Transmission Skid REQUIRES: Assembly to vehicle SPECS: Roll Loop height: 121mm (4.76") Transmission Skid length:...

FEATURES: Black rubber construction INCLUDES: One black coupler One black exhaust deflector Two 7" (178mm) zip ties Two 3" (76mm) zip ties REQUIRES: Installing between tuned pipe and exhaust header

FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum anodized fire red in...

Pair of 5x11x4 mm black rubber seal stainless ball bearings. A step above blue-seal bearings, stainless black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in...

FEATURES: Anodized aluminum construction, blue in color Black nylon ball ends INCLUDES: Two 39mm front camber links Two 49mm back camber links Links are assembled with rod ends and hollow balls One...

FEATURES Traxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 6-7 cell NiMH batteries Compatible only with Traxxas iD equipped NiMH...

FEATURES Traxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 5-6 cell NiMH...

TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve...

Suspension arms , rear (left & right), heavy duty (2) BlackHeavy-duty rear suspension arms incorporate our latest proprietary composite material. Traxxas designed this composite with just the...

.

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Enhance the steering precision, strength, and looks of your Mini Maxx® with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to...

Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your Mini Maxx™. Their 6061-T6 aluminum construction adds strength and precision to your monster truck with...

Replacement electronics tray includes receiver box cover, seals, stuffing tube clamp, and stainless hardwareReplacement part for these models:Spartan® SR

Replacement hatch nut set includes four standard hatch nuts and four wingnuts along with O-rings (4) and stainless 3x8 mm screws (4)

This is the optional Low CG Conversion Kit for the 1/10 scale 2WD Traxxas Slash. FEATURES: Lowers the chassis 1" (25.4mm) for better handling and greater cornering speedHolds battery and...

Built Traxxas Tough™The Traxxas Hoss 4X4 unleashed a new era of extreme monster truck fun and now there’s a LED light kit built to the same standard. Designed to handle the toughest action and most...

The Extreme Heavy-Duty Upgrade Kit transforms your already-tough Hoss® 4X4, Rustler® 4X4, or Slash® 4X4 into the ultimate bashing machine. Engineered for extreme brushless power systems, the kit...

Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)Made from hardened steel,...

Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension.Accessory part for these models:Hoss® 4X4...

Front Shock Tower Replacement part for these models:Jato® 4X4 BrushlessJato® 4X4 VXL

Camber links, front, 90mm (80mm center to center) (2) (assembled with hollow balls)Replacement part for these models:Jato® 4X4 BrushlessJato® 4X4 VXL

Toe links, front (TUBES red-anodized, 6061-T6 aluminum) (2) (for use with #8995 WideMaxx® suspension kit)Traxxas TUBES aluminum WideMaxx® toe links are lighter than steel and stronger than titanium...

Tires and wheels, assembled, glued (2.6" black, satin chrome-plated Mercedes-Benz® G 500® 4x4² wheels, 2.6" tires) (2)/ center caps (2) (requires #8255A extended stub axle)Replacement part for these...

Maximum Durability7-Piece Metric Hex and Nut Driver Essentials SetTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The...

Maximum Durability13-Piece Metric Speed Bit Master Set (#8710)Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The...

Toe links, E-Revo VXL (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 10mm (1)

Body, E-Revo, purple/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Replacement part for these models:E-Revo® VXL...

Toe links, front, Unlimited Desert Racer® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (102mm) (2) (assembled with rod ends and hollow balls)/ aluminum wrench, 7mm (1)Accessory...

Motor mount plate, TRX-4, 6061-T6 aluminum (red-anodized)Accessory part for these models:TRX-4 Assembly KitTRX-4 Ford BroncoTRX-4 Scale and Trail CrawlerTRX-4 SportTRX-4 Tactical Unit

Ring gear, differential/ pinion gear, differential (underdrive, machined) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical...

Grill, Ford Bronco/ grill retainers (3)/ headlight housing (2)/ lens (2) (fits #8010 body) Grill, Ford Bronco/ grill retainers (3)/ headlight housing (2)/ lens (2) (fits #8010 body) Grill, Ford...

Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)Traxxas’ aluminum toe links make it easy to add strength...

PACKAGE INCLUDES: Slipper tension spring (1) Spur gear bushing (1) -- white 4mm Locknut with nylon insert (1)

Body, Ford Raptor R, complete (Fox®) (includes grille, tailgate trim, side mirrors, decals, & clipless mounting) (requires #10124 & 10125 body mounts)The Ford® Raptor R™ Fox body comes fully...

Decal sheet, 1/18 scale TRX-4MT™ Bigfoot® No. 1

Shocks, GT-Maxx®, aluminum (orange-anodized) (fully assembled w/o springs) (2)

Shocks, GT-Maxx®, aluminum (green-anodized) (fully assembled w/o springs) (2)

Body, Sledge®, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)

Bulkhead, rear (lower)/ motor mount washers (steel) (4)/ 4x18mm BCS (4)

Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)

Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Shocks, GTR long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

Wing, Ford Fiesta® ST Rally (black)/ body posts, rear/ 3x8mm FCS (4) (fits #7412 series bodies)

Slipper clutch, complete (for Slash 4x4)

Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies...

TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)

Rudder mount/ rudder pivot/ 4x14mm BCS (stainless) (4)/ NL 4.0 (2)

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts)

Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))Fits 5351 pressure plate and hub.

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

Servo saver w/ adapters

Replacement gray upper chassis

Replacement black upper chassis

Suspension arms, orange, front/rear (left & right), heavy duty (2)

Suspension arms, green, front/rear (left & right), heavy duty (2)

Suspension arms, black, front/rear (left & right), heavy duty (2)

Shock tower (rear)

Shock tower (rear) (for clipless body mounting)

Front and Rear Skid Plates

Front and Rear Skid Plates

Front and Rear Skid Plates

Front and Rear Skid Plates

The 2080R waterproof metal gear servo combines commanding steering authority for 1/16 scale vehicles with the superior durability of all-metal gears for the ultimate driving experience.

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Elevate the performance of your Pro Scale® Sand Car with genuine Traxxas aluminum accessories. Carefully machined from tough 6061-T6 aluminum and anodized in brilliant colors, the aluminum brake...

Left and right Mini Maxx® aluminum steering blocks combine total steering authority with bulletproof strength. Made from solid high-grade 6061-T6 aluminum and protected with a brilliant anodized...

Replacement Mini Maxx front upper and lower bulkhead halvesReplacement part for these models:Mini Maxx®

The Mini Maxx ProGraphix body comes fully trimmed and ready to paint with decal sheet, pre-applied overspray film, and clipless body latches with hardware.For best results, use Traxxas ProGraphix...

Is it time to replace your Mini Maxx® body or upgrade to an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Mini Maxx bodies come...

The clear Mini Maxx body comes fully trimmed and ready to paint with decal sheet, window masking, pre-applied overspray film, and clipless body latches with hardware.For best results, use Traxxas...

Replacement body spacer and clip for the 10423 Slash Late Model unassembled body kit.

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES: Plastic constructionFastens under front section of low CG chassis INCLUDES: Lower...

Give your Mini Maxx® the ultimate suspension upgrade with aluminum GTR shocks. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

Give your Mini Maxx or Mini XRT a bold new look with this underbody LED light set. Lights come pre-mounted to replacement nerf bars for easy installation. The light set requires LED light kit...

The Mini Maxx® LED rear bumper incorporates two red LED light bars to enhance rear visibility. This is a standard replacement for the LED rear bumper used in the 10795 Mini Maxx LED Light Kit. Fits...

The Mini Maxx LED light kit is built Traxxas Tough™, with factory fit and finish for easy installation. The kit includes new front and rear bumpers with white forward-facing LEDs, and rear-facing red...

Replacement differential gear set includes output gears (2), output gear shaft, planetary gears (4), planetary gear shafts (4), and differential spacers (2).

The replacement differential comes completely assembled and ready to install. Fits front or rear.Assembled Differential w/ 12-Tooth Ring Gear

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

The Mini Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Mini Maxx wheelie bar helps prevent backflips under full-throttle...

Use this rear differential pinion gear when installing the shorter 10757-series center driveshaft along with the optional 10758 slipper clutch or 10760-series center differential in your vehicle...

The 47-tooth center differential spur gear (32-pitch) is made from steel for maximum power handling and durability. The spur gear must be used with optional center differentials 10760 or 10760R...