Traxxas

.

Spring retainer (adjuster), red-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)Accessory part for these models:Maxx®

Shock caps, GT-Maxx® shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks)Replacement part for these models:Maxx®

.

Rebuild kit, GT-Maxx® shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks)Replacement part for these models:Maxx®

Rod ends (4) (assembled with steel pivot balls) (replacement ends for #8547A, 8547R, 8547X, 8948A, 8948G, 8948R, 8948X, 8997A, 8997G, 8997R, 8997X)Accessory part for these models:Maxx®

Wheel hubs, hex, aluminum (blue-anodized) (4)/ 4x13mm screw pins (4)Accessory part for these models:Maxx®

Wheel hubs, hex, aluminum (orange-anodized) (4)/ 4x13mm screw pins (4)Accessory part for these models:Maxx®

.

.

Drive cup (1)/ 4x15.8mm screw pin (for use only with #8950X, 8950A driveshaft)Accessory part for these models:Maxx®

.

Toe links, molded composite, 100mm (89mm center to center) (black) (2)Replacement part for these models:Maxx®

Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)Replacement part for these models:Maxx®

.

.

.

.

.

.

.

.

.

Skid plate, roof (body) (blue)/ 3x12mm CS (4)Accessory part for these models:Maxx®

.

.

.

Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)Replacement part for these models:Maxx®

.

.

.

Body, Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheetAccessory part for these models:Maxx®

.

Body, Maxx® (clear, requires painting)/ window masks/ decal sheetAccessory part for these models:Maxx®

TRX-4 Light KitFor the Mercedes-Benz G 500 4x4²LED Light Kit (#8898) for TRX-4 Mercedes-Benz G 500 4x4²The Mercedes-Benz G 500 4x4² is the one of the greatest off-road vehicles ever created. The new...

Traction RedefinedNew all-terrain Traxx™ provides the most significant traction upgrade you can make to the TRX-4. The TRX-4 already has a go-anywhere attitude and the gear to match, but installing a...

Center caps, Mercedes-Benz® G 500® 4x4² wheel (black) (4) (requires #8255A extended stub axle)Replacement part for these models:TRX-4® Mercedes-Benz® G 500® 4X4²

Exhaust pipes (left & right)Replacement part for these models:TRX-4® Mercedes-Benz® G 500® 4X4²TRX-6™ Mercedes-Benz® G 63® AMG 6X6

Decals, Mercedes-Benz® G 500® 4x4²Replacement part for these models:TRX-4® Mercedes-Benz® G 500® 4X4²Accessory part for these models:TRX-4® 1979 Chevrolet BlazerTRX-4® Ford BroncoTRX-4® Scale and...

.

Speed bit handle, premium, large (rubber overmold)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

.

.

.

.

.

.

.

.

.

Tires & wheels, assembled, glued (green wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM rated)

Tires & wheels, assembled, glued (black wheels, Talon EXT tires, foam inserts) (2) (17mm splined) (TSM rated)

.

.

.

Motor mount hinge post/ 5x25mm BCS (1)/ 4x16mm CS with split and flat washer (1)

Driveshafts, center E-Revo (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo)

Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only)

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and...

Rebuild kit, driveshaft (cross pin (2)/ 16mm pin (2)) (metal parts for 2 driveshafts)

Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)Accessory part for these models:E-Revo® VXL Brushless

Toe links, E-Revo VXL (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (144mm) (2)/ rod ends, assembled with steel hollow balls (8)/ aluminum wrench, 10mm (1)

.

Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)

Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers (4)

Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms front (left), heavy duty (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms front (left), heavy duty (upper (1)/ lower (1))Accessory part for these models:E-Revo® VXL Brushless

Suspension arms, front (left), heavy duty (upper (1)/ lower (1))

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)

Push rods, aluminum (red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)Accessory part for these models:E-Revo® VXL Brushless

Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)Accessory part for these models:E-Revo® VXL Brushless

Push rods (steel), heavy duty (2) (assembled with rod ends)Accessory part for these models:E-Revo® VXL Brushless

.

.

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

.

Body reinforcement set (fits #8611 body)Accessory part for these models:E-Revo VXL Brushless

Linkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)

.

.

.

.

.

.Gear set, center differential (output gears (2)/ spider gears (4) Replacement part for these models: Unlimited Desert Racer)

Gear set, differential (front) (output gears (2)/ spider gears (4)) Replacement part for these models: Unlimited Desert Racer)

Carrier, differential (front or center)/ x-ring gaskets (2)/ ring gear gasket/ 14.5x20 TW (2)

.

.

.