Traxxas

Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash...

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against...

FEATURES: Black plastic and steel construction INCLUDES: Front driveshaft assembly Screw pin REQUIRES: Installation on vehicle  

FEATURES: Black plastic and steel construction INCLUDES: 2 external splined half shafts 2 internal splined half shafts 4 metal u-joints REQUIRES: Installation on vehicle

.

FEATURES: Composite nylon construction Replaces a worn or damaged bellcrank set May also be installed on the Traxxas Rustler, Bandit and 2WD Slash models (assembled in different configurations...

FEATURES: Clear nylon construction INCLUDES: One Center Driveshaft Cover REQUIRES: Installation over driveshaft SPECS: Length: 210mm (8.3") Width: 15mm (0.59")

Record your Slash 4X4 adventures and share them online with the Traxxas R/C Hero On Board Video Camera! Mounting the camera (not included) is easy using this high-strength fiberglass bracket. It...

Insist on the only aluminum shock towers that are by Traxxas, for Traxxas. These precision-machined towers add extra strength and anodized style without compromising Slash 4X4's race-bred geometry...

FEATURES: Hardened plastic construction Black in color INCLUDES: One front shock tower REQUIRES: Installation on chassis SPECS: Length: 71mm (2.80") Width: 49mm (1.93")  

Precision-machined for total steering accuracy and bulletproof strength, Traxxas Aluminum Steering Blocks further refine Slash 4X4's razor-sharp handling. Solid 6061 aluminum construction guarantees...

Precision-machined for total steering accuracy and bulletproof strength, Traxxas Aluminum Steering Blocks further refine Slash 4X4's razor-sharp handling. Solid 6061 aluminum construction guarantees...

FEATURES: Hardened plastic construction Black in color INCLUDES: Two steering blocks REQUIRES: Installation on steering assembly SPECS: Length: 35mm (1.38") Width: 32mm (1.26")

FEATURES: Durable steel construction Silver in color INCLUDES: Four 51.5mm pins Four 30mm pins

This unique C-Hub design is already Traxxas Tough; this artfully machined aluminum version is stronger still, and preserves the carefully engineered steering and suspension geometry for track-ready...

This unique C-Hub design is already Traxxas Tough; this artfully machined aluminum version is stronger still, and preserves the carefully engineered steering and suspension geometry for track-ready...

Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & rightAccessory part for these models:Ford Fiesta® ST RallySlash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4...

FEATURES: Hardened plastic construction Black in color INCLUDES: One left caster block One right caster block REQUIRES: Installation on Slash SPECS: Length: 49mm (1.93") Width: 29.5mm (1.16")

FEATURES: Hardened plastic construction Black in color INCLUDES: One rear bulkhead

FEATURES: Black plastic construction INCLUDES: 2 Ouput yokes 2 screw pins REQUIRES: Installation on vehicle

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash...

FEATURES: Aluminum construction, red in color INCLUDES: Two Front and Rear Bulkhead Tie Bars

FEATURES: Aluminum construction Anodized blue in color INCLUDES: Two bulkhead tie bars (front and rear)

FEATURES: Nylon construction Gray in color INCLUDES: One Chassis REQUIRES: Installation of car components SPECS: Length: 310mm (12.2") Width: 180mm (7.1") Thickness: 2.5mm (0.10")

Expand your competitive edge! The optional Center Differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed...

FEATURES: Four clear LED lights in chrome finish plastic housings INCLUDES: Four Lights with Housings, Wiring, Mounting Hardware and Instructions SPECS: Housing Diameter: 0.68" (17.3mm)

Gear set, center differential (output gears (2)/ spider gears (4)/ spider gear shaft (2))Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4...

Output gears, center differential, hardened steel (2)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4

Differential kit, center (complete)Accessory part for these models:Rustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4

.

Tires & wheels, assembled, glued (2.8") (RXT satin chrome wheels, Talon Extreme tires, foam inserts) (2WD electric rear) (2) (TSM rated)Accessory part for these models:Rustler VXLRustler

Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon Extreme tires, foam inserts) (2WD electric rear) (2) (TSM rated)Accessory part for these models:Rustler VXLRustler

Tires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon Extreme tires, foam inserts) (2) (TSM rated)

Tires & wheels, assembled, glued (2.8") (RXT orange wheels, Talon Extreme tires, foam inserts) (2) (TSM rated)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wheels, RXT 2.8" (black) (2)Replacement part for these models:Rustler 4X4

Tires and wheels, assembled, glued 2.8" (All-Star chrome wheels, Maxx® tires, foam inserts) (2)Replacement part for these models:Stampede 4X4Accessory part for these models:Rustler 4X4Bigfoot® No. 1...

Tires, Talon EXT 2.8" (2)/ foam inserts (2)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

.

Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Ford Fiesta® ST RallyTelluride 4X4

Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)Replacement part for these models:Ford Fiesta® ST RallyTelluride 4x4

FEATURES: Constant velocity steel splined construction INCLUDES: Two Diff Output Shafts

FEATURES: Rebuilds front and rear driveshafts INCLUDES: Tube of Grease, six Silicone Seals and ten Pins COMMENTS: Does not include half shafts

Driveshaft, center, 6061-T6 aluminum (green-anodized)Accessory part for these models:Stampede 4X4 Unassembled KitStampede 4x4 VXLStampede 4x4Telluride 4x4

FEATURES: 6061-T6 Aluminum construction Anodized blue in color INCLUDES: One aluminum center drive shaft REQUIRES: Installation on to vehicle SPECS: Length: 165.1mm (6.5") Outer Diameter: 8.5mm (0...

FEATURES: Made of steel INCLUDES: One stub axle SPECS: Length: 36.5mm (23/16") Diameter: 11.7mm (15/32") Threaded part of shaft, length: 9.4mm (3/8") diameter: 3.9mm (5/32")

FEATURES: Made of steel INCLUDES: One stub axle SPECS: Length: 38mm Diameter, bell end: 12mm (1/2") shaft: 5.0mm (3/16") threads: 3.9mm (5/32") Length of thread: 9.3mm (3/8")

FEATURES: Hardened steel construction INCLUDES: Internal Splined Half Shaft

FEATURES: Polished steel construction Externally splined INCLUDES: One Constant Velocity Half Shaft

.

 Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1) Accessory part for these models:Rustler...

 Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1) Accessory part for these models:Rustler...

Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)Accessory part for these models:Rustler 4X4...

FEATURES: Constructed of clear plastic INCLUDES: One rear shaft cover REQUIRES: Installation

Shock tower, front, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, front, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, front, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, frontReplacement part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1) Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rear, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rearReplacement part for these models:Rustler 4X4 VXLRustler 4X4

Bumper, front/ bumper supportReplacement part for these models:Rustler 4X4 VXL

.

FEATURES: Black plastic construction INCLUDES: Rear suspension arm guards (2) Guard spacers(2) Hallow Balls (2) 3x16mm BCS (2) REQUIRES: Installation on vehicle

FEATURES: Composite plastic construction Black in color INCLUDES: Two front suspension arm guards Two guard spacers Two hollow balls Eight 3x16mm button head cap screws REQUIRES: Installation onto...

Suspension arms, front/rear (left & right) (2)Replacement part for these models:Ford Fiesta® ST RallyTelluride 4X4

Skid plate, roof (body) (blue)/ 3x12mm CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body) (red)/ 3x12mm CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body) (green)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body) (white)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body)/ 3x12mm CS (4)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

FEATURES: Composite construction Allows installation of taller multi-cell batteries INCLUDES: Battery Hold Down with metal Post and Body Clip REQUIRES: Fastening to chassis

FEATURES: Composite construction Holds stock 7-cell battery supplied with vehicle INCLUDES: Two battery Hold Down sections with metal Post and Body Clip REQUIRES: Fastening to chassis COMMENTS: Also...

Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screwReplacement part for these models:Rustler® 4X4 VXLRustler® 4X4

Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (blue)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (orange)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (red)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (green)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (white)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

Body support/ 3x12mm CS (4)Replacement part for these models:Rustler® 4X4 VXLRustler® 4X4

Body, Rustler 4X4, blue/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, Rustler® 4X4 VXL, orange/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Replacement part for these models:Rustler®...

Body, Rustler® 4X4 VXL, pink/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Replacement part for these models:Rustler®...

Body, Rustler 4X4 VXL, green/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Body washers, foam, 2mm (2)/ 3mm (2)/ 4mm (4)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 SummitBandit VXLBanditBigfoot® No. 1 Officially Licensed...

.

Body reinforcement set (fits #6717 body)Traxxas body reinforcement sets provide added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strength composite reinforcements...

This is the USB Charger for the LaTrax Alias Quad-Copter Includes: 1 x High Output USB Charger

High-Voltage Power AmplifierAccessory part for these models:Unlimited Desert Racer

 

Requires Traxxas OBA system (not included or sold separately). 

MOUNT, TELEMETRY EXPANDER (FITS TRX-4) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

.

Telemetry expander mount fits XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4. (*requires rear chassis brace #5632)

.

Upgrade Your Traxxas Model with theTQi Telemetry Expander 2.0and GPS Module 2.0!TQi Telemetry Expander 2.0 (#6550X) Contents (Three-Quarter View)Requires the TQi radio system with Wireless Module...

Seal kit, expander box (includes o-ring, seals, and silicone grease) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Bandit VXL E-Maxx Brushless E-Maxx E-Revo...