Traxxas

FEATURES: Constructed of steel, threaded on both ends TiN coated for strength INCLUDES: Two TiN coated Shock Shafts for the Revo type GTR Shocks REQUIRES: Disassembly of shocks SPECS: Length: 1.8"...

FEATURES: Polished aluminum construction INCLUDES: Two Shock Shafts REQUIRES: Installin in shock set  SPECS: Length: 1.8" (47mm) Diameter: 0.14" (3.5mm) shaft 0.098" (2.5mm) threads

GTR shocks in brilliant anodized color! Whether you're looking for the ultimate in damping performance and consistent lap-after-lap control, or you want to customize the look of your truck, the...

GTR shocks in brilliant anodized color! Whether you're looking for the ultimate in damping performance and consistent lap-after-lap control, or you want to customize the look of your truck, the...

GTR shocks in brilliant anodized color! Whether you're looking for the ultimate in damping performance and consistent lap-after-lap control, or you want to customize the look of your truck, the new...

FEATURES: Aluminum shock bodies Fully assembled INCLUDES: Two GTR shocks One bottle of silicone shock oil (weight unknown) Four shock pistons One shock wrench REQUIRES: Shock springs and installation...

FEATURES: Rubber Construction Blue in Color INCLUDES: Two Blue Rubber Driveshaft Boots REQUIRES: Assembly onto Vehicle

FEATURES: Black plastic construction INCLUDES: Two drive yokes Two 4x15mm Yoke pins REQUIRES: T-Maxx 3.3 SPECS: Length: 15/16" (23mm) Diameter: 3/4" (17mm)

FEATURES: Plastic Brake Yoke Steel Brake Pins(each knurled on one end) Steel Screw Pins INCLUDES: One Brake Yoke Two Brake Pins One Screw Pin REQUIRES: Assembly to the vehicle SPECS: Brake Yoke Outer...

FEATURES: Constructed of hardened plastic For front and rear driveshafts INCLUDES: Two external splined shafts Two internal splined shafts REQUIRES: Installing between yokes on each drive shaft...

FEATURES: Black plastic construction INCLUDES: Two yokes Two drive pins REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Fully assembled Plastic telescoping drive shaft with steel universals Blue rubber boot shields telescoping sections from dirt Attaches to the differential with one screw pin Works on the...

FEATURES: Black plastic construction Blue rubber shaft boots INCLUDES: Two half shaft assemblies REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 120mm (4.7")  

FEATURES: Plastic construction, exo-carbon finish wingINCLUDES: One rear wing with decalsREQUIRES: Installation on the Revo 3.3SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm)COMMENTS: Also available...

FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo 3.3 SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm) COMMENTS: Also available in...

FEATURES: Red in color (small purple square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16"...

FEATURES: Red in color (small blue square indicates spring type) Metal construction INCLUDES: 2 springs REQUIRES: Installation on the Revo SPECS: Length: 1-11/16" (43mm) Inside diameter: 11/16"...

FEATURES: Steel construction Painted red w/small silver stripe 4.9 tension rate (Light) INCLUDES: Two Shock Springs REQUIRES: Assembly to vehicle SPECS: Static Length: 50mm (1.77") Wire Diameter: 2...

FEATURES: Steel construction Painted red w/small black stripe 4.4 tension rate (slightly lighter than stock rear spring) INCLUDES: Two 4.4 Black Rate Shock Springs for the Traxxas Revo REQUIRES:...

FEATURES: Red in color Tan band on spring indicates 4.1 tension rating INCLUDES: Two 4.1 rear shock springs REQUIRES: Nothing. These are direct fit springs. SPECS: Length: 1-3/4" (44mm) Outer...

FEATURES: Red in color Green band on spring indicates 3.5 tension rating INCLUDES: Two 3.5 rear shock springs REQUIRES: Nothing. These are direct fit springs. SPECS: Length: 90mm (3.5") Outer...

FEATURES: Metal construction White in Color Pink Weight Rating 1.4 INCLUDES: Two Super Shock Springs Pink 1.4 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Tan Weight Rating 1.0 INCLUDES: Two Super Shock Springs Tan 1.0 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Orange Weight Rating 0.9 INCLUDES: Two Super Shock Springs Orange 0.9 REQUIRES: Assembly onto Vehicle

FEATURES: Metal construction White in Color Yellow Weight Rating 0.7 INCLUDES: Two Super Shock Springs Yellow 0.7 rating REQUIRES: Assembly onto Vehicle

.

.

FEATURES: Direct drop-in for the Revo 3.3, Revo 2.5Rs require slight chassis modification, older Revos require the latest gearbox housing- for proper installation For use with Revos already equipped...

FEATURES: Composite nylon construction, black in color Replaces a worn or damaged center wing mountINCLUDES: One Center Wing Mount Two Beveled Nylon Wing WashersREQUIRES: The remaining parts of 9411...

FEATURES: Plastic construction, white in colorINCLUDES: One rear wing with decalsREQUIRES: Installation on the Revo 3.3SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm)COMMENTS: Also available in...

This is the Traxxas TRX 3.3 Multi Shaft Racing Engine with Pull Starter. This version includes threaded crankshaft inserts for "short" and "standard" applications. ...

FEATURES: Preassembled sensor assembly INCLUDES: One Optidrive Sensor Two 2.5x6mm caphead machine screws REQUIRES: Nothing. This is a direct replacement part.

FEATURES: Steel and plastic gears INCLUDES: One Plastic Forward gear One Steel Reverse gear One Steel retaining clip One copper gear washer One gear pin One instruction sheet

FEATURES: Nylon Construction Black and White in Color INCLUDES: One Nylon FWD Output Gear One Nylon REV Output Gear One White Nylon Drive Dog Carrier REQUIRES: Assembly onto Vehicle SPECS: FWD Gear-...

FEATURES: Black plastic and steel wire construction INCLUDES: One ball link One straight linkage rod One coiled linkage rod One servo horn REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Aluminum and steel construction INCLUDES: One clutch assembly One 2x9.8mm pin One 6x8x0.5mm washer REQUIRES: Nothing. This is a direct replacement part.

FEATURES: Nylon construction INCLUDES: One 1st speed gear REQUIRES: Assembly to vehicle If the Primary Shaft Set is needed, use 5393. SPECS: Gear Diameter: 45mm (1.7") Gear Thickness: 5.5mm (.22")...

FEATURES: White plastic construction INCLUDES: One 39T 2nd speed gear One 13T/17T input gear One screw pin REQUIRES: Installation into Traxxas Revo.

FEATURES: White plastic construction INCLUDES: One 38T 2nd speed gear One 13T/18T input gear One screw pin REQUIRES: Installation into Traxxas Revo.

FEATURES: Steel constructionINCLUDES: Two Output Gears Two Spider Gears Spider Gear Shaft and Diff Carrier Support Instruction SheetREQUIRES: Diff lube; 10K weight 5135 (sold separately)30K weight...

This is the optional Differential Spool for the Traxxas Revo. FEATURES Constructed of steel Installs in diff housing on either front...

FEATURES: Plastic Diff Carrier Blue Rubber Shaft Gaskets Black Rubber Diff Carrier Gaskets Gray Washer INCLUDES: One Diff Carrier Two Blue Rubber Shaft Gaskets One Black Rubber Diff Carrier Gaskets...

FEATURES: Durable black nylon constructionINCLUDES: One diff housing (2 pieces)REQUIRES: 5119 10x15mm Bearing (1) 5118 8x16mm Bearing (1) 5117 6x12mm Bearings (2) 5381 Diff Carrier & Gasket 3965...

FEATURES: Direct replacement part INCLUDES: One differential ring gear One pinion gear REQUIRES: Traxxas Revo 3.3 2.5x8mm cap head screws #3965

FEATURES: Nylon and Rubber Construction Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots Four Black Dust Boot Retainer Four Blue Notched Dust Boot Retainer Four Blue Rubber Boot...

FEATURES: Steel idler gear construction Plastic idler gear support construction Idler gear support is black in color Idler gear bearing preinstalled INCLUDES: One idler gear Part #5377 One idler gear...

FEATURES: Rubber, slicone, plastic, & nylon construction INCLUDES: Mounting post (1), grommets (2), tank gaurd (1), mounting clips (2), o-ring for cap (1), pull ring for cap (1), mounting screws...

FEATURES: Metal construction Black in color INCLUDES: One output shaft, Part #5369 REQUIRES: Installation on the Traxxas Revo SPECS: Overall length: 3-3/8" (85mm) Diameter: 1/4" (6mm)

FEATURES: Steel construction Black in color INCLUDES: One input shaft, Part #5366 REQUIRES: Installation on the Traxxas Revo SPECS: Length: 2-3/16" (56mm) Diameter: 3/16" ( 5mm)

FEATURES: Aluminum construction with fiber pads pre-glued INCLUDES: Two brake pads REQUIRES: Nothing. These are direct replacement parts.

FEATURES: Steel construction, silver in color True vented design with machined face Lightweight design Dissapates more heat for better braking INCLUDES: One Brake Disc REQUIRES: Installation SPECS:...

FEATURES: Plastic construction Tight spring on the top to prevent air leakage Puller for opening the fuel tank quickly INCLUDES: Fuel Tank REQUIRES: Installation SPECS: Length: 3.58" (91mm) Width: 2...

.

FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set REQUIRES: Pushrod

FEATURES: Durable gray nylon construction INCLUDES: An eight piece Rocker Arm Set Eight red Aluminum Spacers REQUIRES: Steel Pushrod -or- the Optional Aluminum Pushrod

FEATURES: Aluminum Construction Gun Metal Grey in Color INCLUDES: Thirty Tall Centered Aluminum Hollow Balls Two Tall Offset Aluminum Hollow Balls Two Bump/Steer Adjustment Shims REQUIRES: Assembly...

FEATURES: Metal Construction Silver and Black in Color INCLUDES: Four Silver Metal Hollow Balls Four Black Metal Shims REQUIRES: Assembly onto Vehicle

FEATURES: Aluminum construction Gun Metal in color Threaded on one end w/machined nut at center of post INCLUDES: Four Rocker Arm Posts REQUIRES: Assembly to vehicle SPECS: Overall length: 33.5mm (1...

FEATURES: Black steel construction INCLUDES: Two Rocker Arm Posts REQUIRES: Installing on the vehicle SPECS: Length: 1.3" (32.8mm) Diameter: 0.20" (5mm) unthreaded portion 0.23" (5.9mm) threaded...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Traxxas 17mm hubs and wheel nuts are made from durable 6061-T6 aluminum, feature an innovative new splined design, and are anodized in a brilliant red or blue finish. For precision alignment...

Fits Continued: 1/10 Slash R.G.D. / Rally VXL / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 / T-Maxx Classic FEATURES: Aluminum construction, green anodized in color INCLUDES: Four aluminum splined...

FEATURES: Aluminum construction INCLUDES: One slipper pressure plate One slipper hub REQUIRES: Installation onto vehicle.

FEATURES: Plastic construction Black in color Metal Pivot Balls INCLUDES: Six Rod Ends Six Pivot Balls REQUIRES: Assembly to vehicle SPECS: Length: 18mm (.71") Width at ball joint: 9.5mm (.38")

FEATURES: Plastic construction Black in color INCLUDES: Four Rear Toe-Link Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 23mm (.91") Width at ball joint: 11mm (.43") COMMENTS: Ring on the rod...

Fits Continued: 1/10 Ford Raptor / Slash R.G.D. / Nitro Slash / Revo / T-Maxx / Slayer Pro 4x4 FEATURES: Plastic construction Black in color Metal Pivot Balls INCLUDES: 12 Rod Ends 12 Pivot...

FEATURES: Black and grey plastic construction INCLUDES: Four throttle servo horns (Airtronics/Sanwa, Hitec, KO Propo/Fut, JR) Eight steering servo horns for the above mentioned radio brands REQUIRES:...

Steering arm (upper & lower)/ servo saver/ servo saver spring/ steering arm shaft

FEATURES: Black plastic construction Standard and maximum throw steering stops INCLUDES: Steering arm mount Part #5343X Steering stop #5343X  

Linkage, steering (Revo) (3x30mm turnbuckle) (2)/ rod ends (4)/ hollow balls (4) Replacement part for these models: Slayer Pro 4x4 ​

FEATURES: Connects between servo horns and steering arms INCLUDES: Two 3x50mm steel turnbuckles, four short rod ends and four hollow balls REQUIRES: Installing on steering assembly according to...

FEATURES: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange INCLUDES: One Exhaust Header REQUIRES: Assembly to...

FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece design INCLUDES: Front and read skid plates Part #5337 (8) 3X10mm button head screws Part...

FEATURES: The plastic bumper is silver in color "TRX" logo in the center of the bumper Body mount is black in color INCLUDES: One rear bumper One bumper mount (2) 4X10mm button head screws (2) 3X26mm...

FEATURES: The plastic bumper is silver in color "TRX" logo in the center of the bumper Body mount is black in color INCLUDES: One rear bumper Part #5336 One bumper mount Part #5336 (2) 4X10mm button...

  FEATURES: Plastic Construction, Black Chrome in Color INCLUDES: One Front and one Rear Bumper REQUIRES: Installation SPECS: Front Bumper Rear Bumper Length: 104mm (4.09") Length: 116mm (4.57")...

Bumper, front (chrome)/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

FEATURES: Nylon Construction Black in Color Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier One Right Axle Carrier Four Dust Boot Retainers Two Bearing Spacers REQUIRES: Installation

FEATURES: Replaces damaged axle carriers and steering blocks. Constructed of black plastic. INCLUDES: One set of axle carriers and steering blocks for the Traxxas Revo. REQUIRES: Bolting to each...

FEATURES: Durable black nylon construction INCLUDES: One upper LEFT FRONT suspension arm One lower LEFT FRONT suspension arm REQUIRES: Suspension pin set to attach to bulkhead SPECS: UPPER LOWER...

FEATURES: Black plastic construction Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330 (2) rocker shafts Part #5354 (4) 4X14mm button head screws  

FEATURES: Black plastic construction Rocker shafts preinstalled INCLUDES: Rear bulkhead halves Part #5329 (2) rocker shafts Part #5354 (4) 4X14mm button head screws

FEATURES: Nylon construction Black in color INCLUDES: One Stering Servo Cover Plate REQUIRES: Installation on the vehicle SPECS: Length: 55mm (2.17") Width: 20mm (0.79") Height: 9mm (0.35")

FEATURES: Black plastic construction INCLUDES: Four steering servo mounts REQUIRES: Nothing. These are direct replacement parts. COMMENTS: Since the Revo uses two steering servos, the vehicle...

FEATURES: Constructed of plastic Holds the high torque and micro servos for the throttle/brake operation and transmission shift INCLUDES: Traxxas Left Electronics Box with lid REQUIRES: Installing on...

FEATURES: Nylon construction, black in color INCLUDES: One Throttle Servo Mount Two 4x10 Socket Head Screws REQUIRES: Installation SPECS: Length: 80mm (3.15") Width: 27mm (1.06") Height: 20mm (0.79")

FEATURES: Black plastic construction Accomodates either AA battery holder or RX flat pack INCLUDES: One receiver box with cover One battery box with cover Rubber charge jack plug Foam pad and...

FEATURES: Black plastic construction INCLUDES: One right electronics box One box cover/charge jack plug Three pieces of adhesive backed foam padding REQUIRES: Nothing. These are direct replacement...

FEATURES: Anodized aluminum (2.5mm thick) INCLUDES: One front & one rear Tie Bar w/one 3x10mm button head screwREQUIRES: 2579 Button Head Screw 3X15mm for rear COMMENTS: The flat tie bar is for...

FEATURES: Steel construction Polished finish INCLUDES: Two Long Suspension Pins Four Short Suspension Pins SPECS: Long Suspension Pin Length: 85mm (3.35") Short Suspension Pin Length: 24mm (0.95")...

These are the (optional) Steel Pushrods for the Rocker Arms These go between the Rocker Arms and the Lower Suspension Arms FEATURES: Black steel construction INCLUDES: Two Pushrods w/pre-installed...

These are the (optional) Red Aluminum Pushrods for the Rocker Arms These go between the Rocker Arms and the Lower Suspension Arms **Must be used with Progressive-1 Rocker Arm Set, .** FEATURES: Red...

  FEATURES: Metal pushrod construction Plastic rod ends with hollow ball ends INCLUDES: (2) pushrods (4) rod ends (4) hollow ball ends REQUIRES: Installation on a Traxxas Revo SPECS: Pushrod...

FEATURES: Black plastic construction INCLUDES: One front shock mount One rear shock mount Four chassis wire clips Four 3x32mm caphead machine screws Four 3x6mm buttonhead machine screws  

FEATURES: Black plastic construction "TRX" logo on front body mount INCLUDES: Front and rear body mounts Part #5314 Front and rear body post Part #5314 (4) 2.5X18mm screw pins (1) 4X10mm button head...

FEATURES: Button head machine screws. Starter attachment screws with threadlock. INCLUDES: Six screws. SPECS: Length: 12mm Diameter: 3mm

.

.

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race...